Much appreciate it Ed! Controlling the last CNC fan had me stumped for a few DAYZ! But Thanks to You, I now have full control of all three! Have a happy safe New Year🎊 Thanks again👍🏾
I wish I could see your Nema motor. Is it a Nema 17, since, my wires are opposite colors of yours. Mine are from the left: Black, Green, Red, Blue. Yours are Blue, Red, Green, Black. I May have to change from TMC 2209 v1.2 to DRV8825 since the TMCs burned because of a bad board and I'm still waiting to see of warranty will cover it. I'm Building a Rat Rig V Minion. Response times from support are long :/
I solved one issue, now another arises! This is a new verB board literally a few days old. It was printing fine up until a few hours ago... now the E0 portion of the board suddenly stopped working? Tested voltage, tested steppers, wires etc. Should be working fine, only changes I made was a new pancake motor I installed. I'm starting to think it's the board...
@@EdwardBraiman I isolated the problem! It was a mixture between the stock extruder motor extention wire, and the Prevent Cold Extrusion setting in marlin. Much appreciate the reply. But now it seems after a 10mm layer height my print quality takes a hit! I think I'm not sending enough current to my Twotrees Nema17 4.1v pancake motor being it skips at times. I'm running a non-geared direct drive setup. I'm well aware pancake motors are not ideal in the aforementioned setups so I'm considering going Geared with a Bondtech DDX Direct Drive eXtruder. Any advice?
Much appreciate it Ed! Controlling the last CNC fan had me stumped for a few DAYZ!
But Thanks to You, I now have full control of all three!
Have a happy safe New Year🎊
Thanks again👍🏾
You're welcome.
Thanks for the concise explanations, just got the SKR v2.0 so looking forward to more videos about it.
You're welcome.
Thanks Ed! Got it working.
Great!
I wish I could see your Nema motor. Is it a Nema 17, since, my wires are opposite colors of yours. Mine are from the left: Black, Green, Red, Blue. Yours are Blue, Red, Green, Black. I May have to change from TMC 2209 v1.2 to DRV8825 since the TMCs burned because of a bad board and I'm still waiting to see of warranty will cover it. I'm Building a Rat Rig V Minion. Response times from support are long :/
Fantástico amigo. Um grande abraço.
Thanks.
I solved one issue, now another arises! This is a new verB board literally a few days old. It was printing fine up until a few hours ago... now the E0 portion of the board suddenly stopped working?
Tested voltage, tested steppers, wires etc. Should be working fine, only changes I made was a new pancake motor
I installed. I'm starting to think it's the board...
What happens if you revert to previous motor?
@@EdwardBraiman I isolated the problem! It was a mixture between the stock extruder motor extention wire, and the Prevent Cold Extrusion setting in marlin.
Much appreciate the reply. But now it seems after a 10mm layer height my print quality takes a hit! I think I'm not sending enough current to my Twotrees Nema17 4.1v pancake motor being it skips at times.
I'm running a non-geared direct drive setup. I'm well aware pancake motors are not ideal in the aforementioned setups so I'm considering going Geared with a Bondtech DDX Direct Drive eXtruder.
Any advice?
There is a Discord link in video description to ask questions that might suit you better.
@@EdwardBraiman Ok, thanks😊
You're welcome.