This is the type of video i like to see, full visual instruction and displaying if its difficult or not to install. Great work and keep it up. I'm already subscribed
The install on a 2022 is a little different and found a couple things that make it easier. There is a wire clipped to the back of the factory intake tube that needs to be removed and removing the front half of the clamp that holds a 3 way valve makes it a lot easier to twist the charge pipe out.
Just be careful, somehow the breather tube hose snapped when I followed these instructions. I would recommend removing that with the T-27. I’m looking for the part now and will be out of commission until I get it.
Who and why would you replace the charge pipes with a stock airbox especially since replacing the stock airbox is one of the easisest and most effective mods?
Very nice The plastic panel at the front of the car below the intake is perfect for a induction pipe to run into an aftermarket airbox with a round filter element similar to the GT350. The german plug in piggyback ECU's are available. 😈😈😈
what's the purpose of the rubber coupler on the charge pipe? I assume it's designed to blow off incase of failure? like why is not one solid piece like the stock one.
Just installed it. But the engine cover is too close if not touching the charge pipe. Wont that create an issue with heat of charge pipe? Or it’s not touching it ?
Great video...appreciate having an install tutorial after purchasing your products. I received and installed the intake and charge pipe a couple of weeks ago. Any good aftermarket cold air intake filters you can recommend that would fit on this intake pipe? Have also installed verus aftermarket heat shield and resonator delete so plenty of room and heat soak should not be an issue.
This is a great upgrade since plastic heats an warps...but aluminum dissipates heat way more effectively. If you are curious think of aluminum foil (yes I know it’s thinner an for cooking) when you cook something say in a toaster oven or a standard oven on a tray or cookie sheet....the aluminum foil is able to be picked up and removed easy vs the pan which is 400+ degrees. Cooler charge pipe will = efficiency and reliability with the bungs to upgrade to meth or nitrous later.
They aren't necessarily a hp gain with out tuning its more of ascetics and reliability. but yes our car is currently on just stock ecu and runs great. Thanks for the support with the channel make sure you have the bell rung so you are notified when videos go live!
SPEED INDUSTRY Thank you so much, really kind of you. I think I’ll dynotune in next two years, after full intake and downpipe installation. Maybe everything with boostlogic kit, but I’d like to wait awhile.. keep on going! I’ll order soon some stuff (hoping you can ship in Italy)
Pointless waste of money. "Adds throttle response", any proof of that? "Plastic breaks" When, 30 years from now? My turbo Subaru is 17 years old and its plastic intake has had 0 problems.
This is the type of video i like to see, full visual instruction and displaying if its difficult or not to install. Great work and keep it up. I'm already subscribed
Thanks a ton for the sub and compliment!
Excellent instructions on installation process . You Rock !
Thanks.
The install on a 2022 is a little different and found a couple things that make it easier. There is a wire clipped to the back of the factory intake tube that needs to be removed and removing the front half of the clamp that holds a 3 way valve makes it a lot easier to twist the charge pipe out.
Just be careful, somehow the breather tube hose snapped when I followed these instructions. I would recommend removing that with the T-27. I’m looking for the part now and will be out of commission until I get it.
Will these intake pipes fit on an mst intake
Are there any aftermarket air boxes that will mate with the FTP intake pipe?
4:08 what is this hose called? Also…if we just so happened to break that clamp? Where could we get a new one/what do we do 😅
Who and why would you replace the charge pipes with a stock airbox especially since replacing the stock airbox is one of the easisest and most effective mods?
Thank you!
HEY! No thank you! make sure you subscribe we have alot more videos on the way!
@@Speedindustry (#SPD111557) Sorry caught it late.
Very nice
The plastic panel at the front of the car below the intake is perfect for a induction pipe to run into an aftermarket airbox with a round filter element similar to the GT350.
The german plug in piggyback ECU's are available.
😈😈😈
great info! thanks! make sure you are subscribed! a bunch more content!
Bro thanks for this vid
what's the purpose of the rubber coupler on the charge pipe? I assume it's designed to blow off incase of failure? like why is not one solid piece like the stock one.
Just installed it. But the engine cover is too close if not touching the charge pipe. Wont that create an issue with heat of charge pipe? Or it’s not touching it ?
Great video thx
As always great video guys and that actually looks pretty good 👍🏻
Thanks
Dow the Charge pipe kit come with a inlit pipe ?
Great video...appreciate having an install tutorial after purchasing your products. I received and installed the intake and charge pipe a couple of weeks ago. Any good aftermarket cold air intake filters you can recommend that would fit on this intake pipe? Have also installed verus aftermarket heat shield and resonator delete so plenty of room and heat soak should not be an issue.
Ethan McPeake thanks for the feedback. We are doing an intake install soon.
@@Speedindustry Awesome- thank you
Are the charge and intake black instead of the bright red?
Where is the intercooler of the new supra?
It’s built in to the engine
Intake is on the driver's side. An air-to-water intercooler is inside the intake manifold there.
I wonder if the BMS intake works with the pipes
Do it need to be tune or no tune required?
No issues w after market intakes? Eventuri?
Angel A we have not tested all the intakes. Some of them come with intake piping already so the intake pipe shown here would not be needed
This is a great upgrade since plastic heats an warps...but aluminum dissipates heat way more effectively. If you are curious think of aluminum foil (yes I know it’s thinner an for cooking) when you cook something say in a toaster oven or a standard oven on a tray or cookie sheet....the aluminum foil is able to be picked up and removed easy vs the pan which is 400+ degrees. Cooler charge pipe will = efficiency and reliability with the bungs to upgrade to meth or nitrous later.
Can this be also installed on the 21 supra?
Is this the same as the "aFe BladeRunner Red Intercooler Tube Hot Side" on your website?! Sorry I can't figure it out....
djao the link is in the description of the video
@@Speedindustry it was just taking me to the general website for some reason.
Any word if this replacement affects the Warranty from dealer?
That all depends - if your concerned , please check with your local dealer, each dealer could handle it differently
Good work! Do you need a dynotune after installing these pieces? Can you leave the stock ecu settings? Thanks in advance.
They aren't necessarily a hp gain with out tuning its more of ascetics and reliability. but yes our car is currently on just stock ecu and runs great. Thanks for the support with the channel make sure you have the bell rung so you are notified when videos go live!
SPEED INDUSTRY Thank you so much, really kind of you. I think I’ll dynotune in next two years, after full intake and downpipe installation. Maybe everything with boostlogic kit, but I’d like to wait awhile.. keep on going! I’ll order soon some stuff (hoping you can ship in Italy)
Do you know if these parts can be used on a 2.0 Supra?
We will be testing a lot of products on the 2.0 very very soon
Could this fit the bmw 340i since it’s the same engine or is the Supra tweeked a little differently?
ftp have this one for 340i too
U have the link to buy this 3 items
It is 2 items and they are linked in the description! thanks so much! make sure you are subscribed!
Same process for the G20 M340i?
Hector Cabrera Same process. Yes
SPEED INDUSTRY thanks 👍🏽👍🏽👍🏽
Any coupon if i buy both pipe
email help@speedindustry.com we can see if there is a possibility. Also make sure you are subscribed! a bunch more content!
I would want a carbon fiber one
good luck getting parts, Toyota will abandon once you buy it, I bought the A91 and the wheel cracked and I am still waiting on a wheel after Months
I can sell you my stock wheels
Pointless waste of money. "Adds throttle response", any proof of that?
"Plastic breaks" When, 30 years from now? My turbo Subaru is 17 years old and its plastic intake has had 0 problems.
Would this fit on a 2021 3.0 premium GR Supra?