This is amazing just too good! Have seen so many works on relief art but you have taken it to another level by carving this ; want to try this out ; what should be minimum thickness of plywood for this kind of art Mam? Because there should be thick layer of pop at the base; also can this be done using marble powder ?
U r Wellcome , please check after 14:33 repeat process . There is no measurement for negative side , u have to keep negative side according to thickness .
@@MyOrganicVlogs Thank you. I read we need to spray water before applying another layer on top of the dried layer- is this correct from your experience? I'm trying to understand how to build layers. Beginner here - your vid is very helpful🙏
1- after carving clean the art work. 2- apply favicol n water mix on the work .(if you are using acrylic colour ) After colouring also apply one more time favicol n water mix . Don't mix too much water .
Superb and l also done it by seeing your video
Hi Nutan , good . Keep watching 😊 . thank you so much.
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
नमस्ते जी,गुड वर्क।
Namste 🙏manoj. Thanks for appreciation. Keep watching.
Beautiful 😍👍👌👌🌟🌟🌟🌟
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
Thanks🌹
Beautiful art
Artist needs only apritiation . Thank you so much 🙏
Super work mam.
Thank you so much , it means a lot for me .
This is amazing just too good! Have seen so many works on relief art but you have taken it to another level by carving this ; want to try this out ; what should be minimum thickness of plywood for this kind of art Mam? Because there should be thick layer of pop at the base; also can this be done using marble powder ?
It is 5mm , if work is big in size than plywood should be around 8 mm .
@@creativeline03 thanks for the information Mam
Nice!
Thank you ! Can you guide how did you level the negative space you carved out . there is,sudden jump at 13 : 10 minutes
U r Wellcome , please check after 14:33 repeat process . There is no measurement for negative side , u have to keep negative side according to thickness .
Wow didi keep it up..👌👌👌👌
Thanks .
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
Aap ne pop k kitne cote kare hai bord k upper
1 inch hona chahiye coteing
I'm sorry, what do you apply first for better grip? Is it glue?
Yes, it's wood glue, fevicol, u can use any wood glue.
Any PVA Glue.
@@MyOrganicVlogs Thank you. I read we need to spray water before applying another layer on top of the dried layer- is this correct from your experience? I'm trying to understand how to build layers. Beginner here - your vid is very helpful🙏
@@chompchomp7853 no need to apply layers, single thick layer will be better.
Asalaamu alaikum Baji great work u do plz help with your knowledge what is the difference between putty and pop thank u
Alaikum assalaamu , both r different things . Please Google for more information .
ua-cam.com/video/jkVD6RGtwGY/v-deo.html
Good work madam & good carving
Thank you so much . Keep watching .
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
So basically apply pop on plywood...let it dry for 3 hrs ...then trace the design .....and then carve it right?
Right.
Have you used two layers of PoP and then traced the design on it?
Yes
What paper did u trace the design on
Normal printing paper📄.
🙏👌👌
,🙏
What was the adhesive?
That was wood glue, fevicol SH.
@@creativeline03 Thank you
What paints can we use, oil colours or acrylic?
U can use both .
1- after carving clean the art work.
2- apply favicol n water mix on the work .(if you are using acrylic colour )
After colouring also apply one more time favicol n water mix .
Don't mix too much water .
Thanks a lot!
Outstanding performance beauty well done
Thank you so much ❤️😍
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
How much time to keep it for drying before we start carving?
24 hours .
@@creativeline03 thank you
U r Wellcome 😊
Vry nice
Thank u Jyoti .
You have mentioned POP and then wall putty, I am confused now :( Can you explain if all this is done only with POP? Thanks and beautiful work btw :)
Hi Udayani , it's a mistake , use POP only , thanks for comment and Let me know what kind of work u like . thank you.
@@creativeline03 thank you so much for clarifying :) I love texture paintings!!
@@udayanipathapati422 ok, thanks.😊
Thank you maam
Is wall putty water proof
Que usas yeso o cemento blanco??
It's plaster of paris .
u can use cement also . It's plaster of Paris .
@@creativeline03 GRACIAS!!
What abt the plywood
Around 8mm thik it should be.
Thank you 🙏
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
U can watch this video also
ua-cam.com/video/o8wL5Wzt1Lk/v-deo.html
That's for maseg
Mem is tools nem telmi
Carving tools .
Why don't u show whole carving...u always skip...
Don't be so angry sweetheart , next time I will try .
Actually viewer don't want to see long videos . That's the reason .
@@creativeline03 I m not angry...but u can use fast forward so that v can watch whole process ❤️
@@artistichuesbyvandita8764 yes ,definitely. Keep watching .
pls upload or put english captions (subtitles ) on your videos. i dont use audio. i rather read the texts. thanks.
The videos are pretty self explanatory, so I don't think they need any kind of subtitles
😄 Keep watching, thank you