So sorry the music is quite obnoxious apon review. my mistake. i have used this paint on a model kit since making the video and with a decent prime surface they do work well with flow improver however very thin they do work well in airbrush for a cheap selection to fall back on maybe as they are very inexpensive.
@@gundamfan2020 Ah, come on man. Yeah, it's not very slick, but you know what, I was looking for an info about those cheap-ass paints and didn't really hope to find it and boom you posted it. Thank you.
Any regular airbrush cleaner for Acrylics will work, i use Vallejo airbrush cleaner but many others will work, 'ultimate' is a good brand i use also and its quite cheap
@@gundamfan2020Have you tried timbertech cleaner? It is cheaper. But my question is if it is good. I use water downed window cleaner atm and is looking for a cheap cleaner. The window cleaner works ok but I've noticed that the more pigmented the acrylic paint is, the more difficult it is to clean and I end up needing to use my nails to scratch of some of the paint from the cup.
@@nekoboygames7786 ive not used these paints in a while so i think adding flow improver will help reduce dtying times but i usually go for lacquer paints now but if they supply a cleaner give it a go ive not used it myself actylic really is a pain to clean up once dry. it almost forced me to use acetone to flush my brushes lol
i just got these, will be playing asap, total amatuer, tried mixing some cheap paints but they lacked pigment hence this purchase, I will try vallejo and some other brands after
Cool. These paints are quite thin so i would use them on a lower psi but try them out they are ok i guess not the best paint for a great cheap alternative, just have to be liberal with the application to stop pooling.
That's great I normally use vallejo or tamiya and zero paints but i saw these on amazon cheap so as a backup or a base coat option thjey are not bad for the price
@@gundamfan2020What psi would work best? I'm new to this and are looking at getting these paints. I think they are the same kind as the tester paints I got with my timbertech airbrush compressor with a Fengda BD-130 airbrush. But I have a difficult time finding the right airflow.
@@jamesfairfoul1265I'm using dollarstore paint that I thin with mediums and water, except for the 6 test paints I got with my airbrush. The dollarstore paint gets pretty much see-through after it has been thinned enough to work in my airbrush (but I still need to use close to 3 bars for it to come out bc if I thin it more it would be like using tinted water.) If the testers are Timbertech (they came with a Timbertech airbrush compressor kit), they are great compared to cheap paints. But, instead of the normal colours like red, yellow, blue, black, white and a 6th colour, they took the colours mustard yellow, purple, red, white, black and green. No blue, no normal yellow. And as there was no brand on the paints, I hope they are Timbertech paints.
I got the Timbertech Acrylpaint Airbrush colors 12 * 10ml model and they suck, no paint drips out of them and you need to remove a rubber plug at the bottom and push the bottom then pain pisses out the bottom and the top.
Probably not the paint should take the hole front assembly off needle nozzle and all that and clean in the body of it then clean the nozzle using either the needle or the tool if you have it. I'd use a aggressive cleaner like la best or Windex mixed with acteton I split the Windex in half into a spray bottle or old syrup bottle and mix the whole bottle of 100% acetone nail polish into half and same with 70% or height isopropyl alcohol then get as close to half that mix and distilled water. Then you have a weekly deep clean and cloggy or sluggish airbrush cleaning kind and one for normal cleaning.
yeah i had a few comments on that i am sorry im thinking of redoing the video as im not completely happy with it or the product, thanks though appreciate the feedback
i may have just been having a crap day with my gear but with top notch gear the paint will be fine im sure my airbrush and compressor are really letting me down
So sorry the music is quite obnoxious apon review. my mistake. i have used this paint on a model kit since making the video and with a decent prime surface they do work well with flow improver however very thin they do work well in airbrush for a cheap selection to fall back on maybe as they are very inexpensive.
Damn dude, the background audio is quite intense. Never thought an airbrush paint video can be so anxiety inducing
asi es ...ansiedad
its a pretty crap video like most of my stuff i may delete it
@@gundamfan2020 Ah, come on man. Yeah, it's not very slick, but you know what, I was looking for an info about those cheap-ass paints and didn't really hope to find it and boom you posted it. Thank you.
its all good lol i hate the sound of my own voice so i suffer just as much 😂
i used the grey and purple to mix the shade i wanted for my MG sandrock EW kit using these paints and came out rather well i was super shocked!
What do you suggest to clean your airbrush after use of this paint?
Any regular airbrush cleaner for Acrylics will work, i use Vallejo airbrush cleaner but many others will work, 'ultimate' is a good brand i use also and its quite cheap
Thank you
@@gundamfan2020Have you tried timbertech cleaner? It is cheaper. But my question is if it is good. I use water downed window cleaner atm and is looking for a cheap cleaner. The window cleaner works ok but I've noticed that the more pigmented the acrylic paint is, the more difficult it is to clean and I end up needing to use my nails to scratch of some of the paint from the cup.
@@nekoboygames7786 ive not used these paints in a while so i think adding flow improver will help reduce dtying times but i usually go for lacquer paints now but if they supply a cleaner give it a go ive not used it myself actylic really is a pain to clean up once dry. it almost forced me to use acetone to flush my brushes lol
Do u have to reduce them says ready to use
They are ready to use really thin paint airbrush ready but i would apply in very thin coats
i just got these, will be playing asap, total amatuer, tried mixing some cheap paints but they lacked pigment hence this purchase, I will try vallejo and some other brands after
Cool. These paints are quite thin so i would use them on a lower psi but try them out they are ok i guess not the best paint for a great cheap alternative, just have to be liberal with the application to stop pooling.
Hey tried them earlier, I was impressed, I've only used cheapo acrylics so this was a step up, pleased at results
That's great I normally use vallejo or tamiya and zero paints but i saw these on amazon cheap so as a backup or a base coat option thjey are not bad for the price
@@gundamfan2020What psi would work best? I'm new to this and are looking at getting these paints. I think they are the same kind as the tester paints I got with my timbertech airbrush compressor with a Fengda BD-130 airbrush. But I have a difficult time finding the right airflow.
@@jamesfairfoul1265I'm using dollarstore paint that I thin with mediums and water, except for the 6 test paints I got with my airbrush. The dollarstore paint gets pretty much see-through after it has been thinned enough to work in my airbrush (but I still need to use close to 3 bars for it to come out bc if I thin it more it would be like using tinted water.) If the testers are Timbertech (they came with a Timbertech airbrush compressor kit), they are great compared to cheap paints. But, instead of the normal colours like red, yellow, blue, black, white and a 6th colour, they took the colours mustard yellow, purple, red, white, black and green. No blue, no normal yellow. And as there was no brand on the paints, I hope they are Timbertech paints.
I got the Timbertech Acrylpaint Airbrush colors 12 * 10ml model and they suck, no paint drips out of them and you need to remove a rubber plug at the bottom and push the bottom then pain pisses out the bottom and the top.
that sucks i would have got a refund they're not high quality paints thats for sure
The bottles of the paints you bought are designed to attach to a specific airbrush model, that's why getting them out manually doesn't work.
that makes sense ha ha thanks ill look for a better brand of mix bottles
0:44 it is not Netherland, it is made in China.
thanks for the info
I got the same pack does not spray good at all..will only keep it just to thin out and use in case I run out of everything else
they do spray very thin so i used very low psi terrible paints if im honest lol but i keep them as aback up
i just bought these , but my airbrush clogging every time, somebody have same experience ??
these are quite thin paints so im unsure as to why its clogging. i have not came across this issue.
Probably not the paint should take the hole front assembly off needle nozzle and all that and clean in the body of it then clean the nozzle using either the needle or the tool if you have it. I'd use a aggressive cleaner like la best or Windex mixed with acteton I split the Windex in half into a spray bottle or old syrup bottle and mix the whole bottle of 100% acetone nail polish into half and same with 70% or height isopropyl alcohol then get as close to half that mix and distilled water. Then you have a weekly deep clean and cloggy or sluggish airbrush cleaning kind and one for normal cleaning.
Damn dude... Look at the fking bottle..
The colour is clearly stated on the bottle label all you need to do is use your eyes n read.
small print on the bottles is hard to read 😉
monkee cant read gud
the background music is so annoying , I couldnt continue watching! but thanks anyway
yeah i had a few comments on that i am sorry im thinking of redoing the video as im not completely happy with it or the product, thanks though appreciate the feedback
Would be nice if you could avoid saying urm every three words.
yeah it would be great i don't work from a script plus nerves ill try better to know what im gonna say before i say it lol
@@gundamfan2020 nah dont worry its fine. thanks for the video
@@gundamfan2020I honestly didn't even noticed until I read the comment.
Noted, will not be buying those 😂
i may have just been having a crap day with my gear but with top notch gear the paint will be fine im sure my airbrush and compressor are really letting me down