Would it be beneficial to creat a sand catcher at the bottom of the waterfall in the shape of an inverted 3 dimensional trapezoidal prism or inverted cone shape? The video didn't really mention much about the most effective way of catching sand while maintaining the supply of sand for a longer lasting waterfall effect. Obviously over time the sand would have to be replenished anyways. Im just trying to figure out the best possible design before I go ahead an build one for my aquarium.
I used this video to guide me through my project but I have a very weak sand flow however I do have a sand boil over the tee. Any idea how I can adjust this?
I made this, followed the video and it work when i first start it during test, when sand is in the pipe already as you first turn on work good, but when run longer the sand stops collecting at the funnel. The water escaping through funnel pipe part is causing sand to blow all over and can't sink into funnel to be brought up to the arm outlet. I tried to pack in more sand and rock to controls it did not help. The top outlet pushes out water still despite this which would be fine it it was going to be above water but below it give no effect without the sand. How do i increase the sand going up to the arm and prevent the water pressure going up the funnel not allowing sand to gather in the pipe.
Not the sand, but I would worry about the chemicals in the glue and all other materials. I have ONLY used aquarium silicone to be sure not to kill my fish.
Prasadbn Pachi I have the same problem right now.. were you able to fix yours??? how did you do it???? I tried many time still the same.. any body to help pleaseeeee..
Good Tutorial. Could you please let me know what should be powerhead Watts or so?? Because I tried with 15wats filter pump. The sand dint pull it up. Only the water flows
Sir can you pls write up all the necessary tool and equipment needed and all what type of rock did you use and what those poqder that you sprinkled into it. Thank you
Just finished installing my 60 gallon aqauriam into my living room wall, ill be attempting to follow your directions and pull This waterfall off, I do have one question can you tell me the name or any other info as far as how to go about ordering the correct sand thank you and you do beautiful work
I have followed the vid. But I either get the sand catcher bubbling and no water out the outlet. Or way to powerful and explodes everywhere. Iv bought inline valve and thst just stop the flow and zero water came out the pipe. Please help
water powered is much easier , with air you have to get a very high powered pump or it does not lift the sand , then you have unwanted bubbles to deal with and they are difficult to hide
1) can use filter because if use filter to clean water than filter will catch sand 2) off course all sand will not go inside the bucket and then can not recycle so we need to add more sand ? Or can reduce height 3) when 45o deg cut than it should open from upside ?
Geil 👍. Wollte schon seit gestern wissen wie dass Funktioniert. Hab dass gestern Nacht in einem Video über ein Aquarium gesehen 🐠. Leider auf Japanisch 🇯🇵🤷🏻♂️. Danke jetzt kann ich es nach bauen 😁👍
you have to put "some" sand back into the trap, it doesn't all make it to the right place, some scatters....its a matter of just monitoring every few days to replenish. Tip: buy lots and lots of sand and be ready to use a mini-shovel to capture some of it back to the sand-trap. thanks for watching!!!
My Questions 1) can i fix waterpump of "TEE" . 2) why you use big pipe after "TEE" . whats the benifits ? if i fix pump with "TEE" whats the disadvantages ? 3) how much Power of water Pump need ? 10 watt to 100 watt ??? 500 L/H to 5000 L/H ????
cái bơm mình dùng loại 1 hút 1 đẩy thôi phải ko bạn, thấy nhiều ng sử dụng cái bơm có nhô nhô cao ấy, mình nghĩ chiếm diện tích và mất công suất, thắc mắc mãi
Unlike others, this guy has explained it so very well in depth, especially the 45 degree cut and pipe length etc. Very well done. Thanks a lot Dear
Keren mas ,mantab air terjunnya,,
Salam dari pemula,tetap semangat 💪👍
Thank you so much for following up with your last video this is going to make a lot of people happy 😃
Thanks for helping me share it
Would it be beneficial to creat a sand catcher at the bottom of the waterfall in the shape of an inverted 3 dimensional trapezoidal prism or inverted cone shape? The video didn't really mention much about the most effective way of catching sand while maintaining the supply of sand for a longer lasting waterfall effect. Obviously over time the sand would have to be replenished anyways. Im just trying to figure out the best possible design before I go ahead an build one for my aquarium.
What type of material did you use as a divider on the T for the 45°cut?
Very interesting project, but what are the dimensions of the pvc pipe and it's connectors.
Standard pvc pipe & connectors, the smaller one.
3/4 inch pipe and fittings
Amazing vídeo....greetings from Brazil
Which filter do you use it?
What kind of pump is use it? Does it blow only air? Or pump the water that push the sand?
What size pump is that
How r u connecting the pvc to the pump? Cuz I see that there is also pvc connected to the pump into is the blue pex or sonething?
I used the soft pine to connect to the pump
What pipe size did u used?
Size: 16mm
After finishing of sand can we see water fall...
I used this video to guide me through my project but I have a very weak sand flow however I do have a sand boil over the tee. Any idea how I can adjust this?
Best video explaining how to make it. Even with no words. this was an amazing tutorial .NEW SUB HERE
Which pump have u used ?..The sand keeps get pulling how much sand do u need in the box ?
18 watt pump head. 1 kg Silica sand.
I made this, followed the video and it work when i first start it during test, when sand is in the pipe already as you first turn on work good, but when run longer the sand stops collecting at the funnel. The water escaping through funnel pipe part is causing sand to blow all over and can't sink into funnel to be brought up to the arm outlet. I tried to pack in more sand and rock to controls it did not help. The top outlet pushes out water still despite this which would be fine it it was going to be above water but below it give no effect without the sand. How do i increase the sand going up to the arm and prevent the water pressure going up the funnel not allowing sand to gather in the pipe.
You should stack rocks around to form a funnel. and the sand must be abundant enough to flow down
The sand will not effect the fishes please reply
No effect for the fishes
Not the sand, but I would worry about the chemicals in the glue and all other materials. I have ONLY used aquarium silicone to be sure not to kill my fish.
Wouldn't a pvc venturi yield the same if not better pressure drop/intake suction than the modified tee?
Great i tried it its working but not as shows as video can u pls tell me which motor should i need to use pls reply
Brother I have a problem. In the T-joint water is coming out, where sand was supposed to go inside the pipe. Please help me.
Prasadbn Pachi I have the same problem right now.. were you able to fix yours??? how did you do it???? I tried many time still the same..
any body to help pleaseeeee..
@@vaughnryker7454 Your divider in the tee needs to be correctly set up! Try different divider adjustments before glueing it together.
I have tried so many times but the water is coming out from the T point please help
please help me out
Wat pump using.name of the pump
Using Pump Lifetech 18w
Please tell me, what is the name of this motor.
Power Head (PH)
Yamaha
What size is the t pipe and the L shaped corner pipes if u can let me know as i want to make one of these after watching your video
Standar T pipe & L shapped. Can buy it at Fish Store equipments.
3/4 inch pipe and fittings
What kind of stones do you use in the aquarium plz....?
GOOD QUESTION i NEED TO KNOW THAT TOO.
Lava Rock Stones & Silica Sand
can air pump work this?
Great video!
Thanks you
Good Tutorial. Could you please let me know what should be powerhead Watts or so?? Because I tried with 15wats filter pump. The sand dint pull it up. Only the water flows
I use pump 18w
Amazing
Thank you for posting this!
Thank you for watching the video
where can i get white sand.. i cannot find it at any aqua shop.. is it another method using other then white sand?? can we using beach sand ??
This sand is sold in China and Vietnam
Saudações do Brazil amigo! 💚🇧🇷
thanks youAjude-me a compartilhar para que todos possam cumprir sua paixão
Sir can you pls write up all the necessary tool and equipment needed and all what type of rock did you use and what those poqder that you sprinkled into it. Thank you
So Great
Thank pro 🥰
What pump did u used,?
I use atman 8.5w pump
Just finished installing my 60 gallon aqauriam into my living room wall, ill be attempting to follow your directions and pull
This waterfall off, I do have one question can you tell me the name or any other info as far as how to go about ordering the correct sand thank you and you do beautiful work
this is the problem with this videos no body say anything about the sand
the name of sand is Silica Sand. Can buy at fish store equipments.
I have followed the vid. But I either get the sand catcher bubbling and no water out the outlet. Or way to powerful and explodes everywhere. Iv bought inline valve and thst just stop the flow and zero water came out the pipe. Please help
Did you get this resolved
Que tipo de pegamento usas porque lo he visto en varios videos tuyos
So all my sand is flowing out of the bucket instead of out the top how do I fix this?
hello I try to make a cascade of sand for my aquarium I followed your video to do it but I have water coming out where the sand must enter
Same here
Bro get solution.. I same to
Try the air bubble solution. It worked for me
It's been two months.did u get it to work? U need to cut the T deeper so it passed the whole length of the top tube hole.
Same here 😔
Cho mình hỏi máy bơm bao nhiêu W vậy ạ
Hi, i tried it. But water is bursting out of the T pipe . Pls advise
What is the benefits between using a power head or using an air stone? I have seen both methods. Trying to decide which I would rather do.
air stone won't last long , power head is permeant ,
water powered is much easier , with air you have to get a very high powered pump or it does not lift the sand , then you have unwanted bubbles to deal with and they are difficult to hide
How many kilo of White sand ?
Galing naman..stay connected sana makapunta karin sa aking kusina.from hastag tv balvin
1) can use filter because if use filter to clean water than filter will catch sand
2) off course all sand will not go inside the bucket and then can not recycle so we need to add more sand ? Or can reduce height
3) when 45o deg cut than it should open from upside ?
T band me 45° ka cut lagane par bhi pani wohi se hi niklta hai uper kam jata hai kiya kare please tell me
Why dont you mention the type of pump and size and power of it.
18 watts Power Head
Welchen Durchmesser brauchen die plastikrohre bitte
Hi can you please give me the sizes of pipes and fittings/joints thanks
Standard PVC Pipes & Connectors. The smaller one for PVC Pipes. Can buy at building materials store. For connectors can buy at fish store equipments.
What is the size of the pvc.pipe
size pvc 16 thanks
Geil 👍. Wollte schon seit gestern wissen wie dass Funktioniert. Hab dass gestern Nacht in einem Video über ein Aquarium gesehen 🐠. Leider auf Japanisch 🇯🇵🤷🏻♂️. Danke jetzt kann ich es nach bauen 😁👍
Awesome 👍 I have made waterfall using styrofoam and it work 😊
What is the power of the moter you used?
@@chetanag9394 you can see on my youtube channel ua-cam.com/users/atimCruziskandar
😊
can air pumo work this?
Yes
Hello,
Nice Video, well explained.
But one question i still have. Do you think its possible to use the output of my external Filter?
What flow rate powerhead should you have?
1000 Litres / Hour (L/H)
@@mrlilik1 will a 160 gph (≈600 liter per hour) work?
@@dannymayer3294 I think it can work. You can try sir. 👌👍
Cảm ơn bạn Xin chào từ Ukraine! ! !
Ống phi bao nhiêu vậy bạn?
Phi 16 bạn nhé
Do you sell the aquarium...How much it costs approx
Yes. It is 1000$
o2 (waterfall) + co2 in tank?
No o2
There is no o2 pump..only a waterpumpthats the best way to protect co2 with a sandfall..
Excellent job
thank you very much
Can one use sand soil...?
Use Silica Sand
I have same problem which is in 7:33 your video. How to create ??😣🙄
Please arrange rocks around like a maze to catch the sand flowing down the pipe
I did that 45 degree slit in the T piece yet the water is still shooting out of it i stead of passing through. Any idea why?
You need to make the cut all the way past tube hole of the top T.
@@kirstentoh thanks kirsten il try that in my next build
No sand came out only water. And the sand blow back in the T. How do I fix this one?
Cut at a 45 degree angle and deeper
Wow!! This is amazing thank you for sharing ❤
😍😍 thank you !
new sub here asking how many T shape and total of coupling used for thos proj..thank you MORE POWER to your channel
Easy to see: 7 bows and two Tees. or 6 bows if your pump comes with one.
Bác có làm kênh VN k vậy?
Dạ kênh nước ngoài là chính anh
Việt nam cũng có
Do you have a an online shop? I want to buy one :)
what's a good way to hide the pump and prevent sand pickup? Thanks
Place the pump under or behind the lava rock. You can make place for the sand pick up from plastic plate / mica plate.
does it make loud noise?
May I ask what kind of glue did you use to glue the rocks. I saw you was woking on the waterfall. 😀
yes, I want to know that too
Very nice👍👍
Seriously talented
isn't possible to make a lower height water falls? Cause im planning to make 2floors landscape river forest style
Height depending on your lake size.
Pump ka power kitna he??plz reply
1000 Litres / Hour. 18 watts.
Siêu trong nhình đã con mắt thiệt good good
Cảm ơn bạn
Which type of rocks are used
Black lava rock
So do you have to refill the sand trap? Or does it refill itself?
If the waterfall effect still appear without the use of sand?
you have to put "some" sand back into the trap, it doesn't all make it to the right place, some scatters....its a matter of just monitoring every few days to replenish. Tip: buy lots and lots of sand and be ready to use a mini-shovel to capture some of it back to the sand-trap. thanks for watching!!!
Toàn bộ hệ thống ống, cút T và co bạn dùng fi bao nhiêu vậy?
Phi 16 bạn
BestAqua cám ơn bạn rất nhiều 👍
When finish the sand in box then only water flow in the pipes
1. Water + sand OUT must be under the water surface. If it higher, the pump will blow the sand out at the T-point "Sand - in"
Do you sell a finished product like this?
Thanks for the tutorial
My Questions
1) can i fix waterpump of "TEE" .
2) why you use big pipe after "TEE" . whats the benifits ?
if i fix pump with "TEE" whats the disadvantages ?
3) how much Power of water Pump need ? 10 watt to 100 watt ??? 500 L/H to 5000 L/H ????
What is sand gradation?
Use the smoothest white sand
I try to make this but water flow in t point tell me what I do
Put the Sand-out under the water surface.
Modify the T-point
so its not the water which flows downhill for a underwater waterfall, but sand?
Yeah
I think the sand is circulated through the tubes
may i know the name of that pump?
It is a penis pump
atman pump 8.5w
I can use a extra filter in waterfalls aquarium, please tell me
not in the water fall itself, it would filter out your sand!
Diameter of pile ?
Cảm ơn bạn Đường kính của ống là gì? Độ dày là gì? 20 mm?
16mm
Bang Kompa nya 1200 bisa g buat 2 lobang
itu mesin nya ,,,kusus angin pa kusus air ya
Mesinnya menghasilkan angin untuk mendorong air
Mình xem video của bạn rồi làm mà sao các trồi ngược lại t lưỡi gà chỉ giúp mình với
Cạn cắt sau xuốn tý nếu ko đc nữa thì đỗi cái bơm mạnh tý là ok bạn
Mình dùng bơm 12w có mạnh quá ko bạn
350liter/hr pump me ho sakta he kya
1000 litres / hour. 18 watts.
Cái máy bơm giấu thế nào để ko bị ghẹt bạn
Giau ngay phia sau luon ban nhe
cái bơm mình dùng loại 1 hút 1 đẩy thôi phải ko bạn, thấy nhiều ng sử dụng cái bơm có nhô nhô cao ấy, mình nghĩ chiếm diện tích và mất công suất, thắc mắc mãi
hi. size of the pipe pls. thank you
Half inch pvc pipes
Submersible pump description pls
18w pump from atman
Круто👍👍👍👍👍👍👍👍👍👍👍👍
thanks you
GREAT VIDEO 👊