Introduction of details of XK K110・2S (細部を公開)

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • XK K110・2セルの詳細動画です。
    動画にある受信機ボードのラダー駆動回路の改造は
    海外の方がアップしてる動画を参考にしてください。
    ”Rewiring XK K110 RX board” で検索。
    でも、K110・2Sには必要ない改造です。
    ESCのBECをテールモーター駆動に使うのは無理があります。
    This is a detailed video of the XK K110 / 2 cell.
    The modification of the ladder drive circuit of the receiver board in the video
    Please refer to the videos uploaded by overseas people.
    Search for "Rewiring XK K110 RX board"
    Kevin MacLeod の Mesmerize は、クリエイティブ・コモンズ - 表示 4.0 ライセンスに基づいて使用が許諾されます。 creativecommon...
    ソース: incompetech.com...
    アーティスト: incompetech.com/

КОМЕНТАРІ • 18

  • @sontungtrinh3992
    @sontungtrinh3992 2 роки тому +1

    Character In the video It's great, I like it a lot $$

  • @mfmskx
    @mfmskx 2 роки тому

    動画内に出ている、受信機ボードを取り付ける両面テープは、純正のものなのでしょうか。
    私は、整備のコストダウンのため、安価にスポンジテープが手に入らないかと探していますが、見つかっていません。
    ※色々とためになる動画、ありがとうございます。私も長年、K110を飛ばしています!

    • @RC_Heli_chan
      @RC_Heli_chan  2 роки тому

      コメントありがとうございます。
      使用している両面テープは、バングッドで売っていた物で、純正と同じ素材のうすい物です。
      残念ながら、現在は手に入らない感じです。おすすめは www.nitoms.com/products/proself_dbss_tp/
      フタバのGY401に使われてる両面テープに近い物で、フィーリングもいい感じです。私も結構これで飛ばしました。
      純正に近い物なら、ネオヘリさんや、ゆきぐにねっとしょっぷさんで扱っている3Mの物が良いと思います。

    • @mfmskx
      @mfmskx 2 роки тому

      @@RC_Heli_chan
      ありがとうございます。
      純正のような、とてもやわらかいスポンジのテープが良いと思っています。
      ゆきぐにねっとしょっぷさんの、商品画像を見ると、確かに純正のものと似ていますね!

    • @RC_Heli_chan
      @RC_Heli_chan  2 роки тому

      純正と全く同じ物を入手するのは困難なのですが、その青い3Mの物は純正に近い柔らかさがあります。
      Amazonにも同じ青い物はありますが、サンドしてある材質が違うバージョンが殆どなので、ミニヘリ系のショップ
      で買ってください。純正の物も、ドライヤーなどで温めて慎重にはがすと何度か再利用が出来ます。

  • @draghino6862
    @draghino6862 3 роки тому

    Hi, hello, the sut tail motor
    is it just more durable or is it even more powerful than the stock motor?
    Thanks for the reply

    • @draghino6862
      @draghino6862 3 роки тому

      sorry for the thousand questions, what's the use of rewiring Board ?

    • @RC_Heli_chan
      @RC_Heli_chan  3 роки тому

      Hello
      The special tail motor is compared to the normal
      It's a little nice. How to do a right pirouette
      You may see subtle differences

    • @RC_Heli_chan
      @RC_Heli_chan  3 роки тому +1

      The jumper cable on the receiver board
      FET for driving the main motor of K100
      It is a cable to use for the tail motor.
      It is a modification that is not necessary for K110 / 2S.
      I just reused the receiver board modified in the experiment

  • @savageshorts3024
    @savageshorts3024 3 роки тому

    Hay I can understand your language can you make vedio in wnglish

    • @RC_Heli_chan
      @RC_Heli_chan  3 роки тому +1

      Hello
      Please use UA-cam's automatic translation function.
      It is automatically translated into the languages of various countries. Below the frame of the video
      There should be a settings screen.

    • @savageshorts3024
      @savageshorts3024 3 роки тому

      😊❤️😊 thanks

    • @savageshorts3024
      @savageshorts3024 3 роки тому

      Show us your face 🥺

  • @user-bj4nj8dm1f
    @user-bj4nj8dm1f 8 місяців тому

    請問馬達要換嗎?

    • @RC_Heli_chan
      @RC_Heli_chan  8 місяців тому

      你好。
      您需要將其更換為 XKK120 或 TREX150 馬達。 或推薦用於 Aliexpress 上銷售的 TREX150 的外部馬達

  • @savageshorts3024
    @savageshorts3024 3 роки тому

    English

    • @RC_Heli_chan
      @RC_Heli_chan  Рік тому

      Please watch it with the subtitle function of UA-cam

  • @thanhsonbui9100
    @thanhsonbui9100 2 роки тому

    Character In the video It's great, I like it a lot $$