Agree, as someone relatively new to woodworking after a long break it's good to see these kinds of things so they are in our minds as we do our thing. 😀
Thank you for putting in the screw incident. We all need reminding that we do risky things because of familiarity our tools and our trade. The saw stop did not operate because that particular screw was totally insulated by the wood. They used to call devices like the saw stop "Earth LEAKAGE circuit breakers" because they broke the power from the circuit if it detected any current going to earth. In reality they looked for an imbalance between the two power wires and triggered the breaker. In the case of the saw stop the device triggers the braking device. Back on children again. Just got a message to say my 12 year old grand daughter broke her thumb during a late tackle in Rugby League. She is a real girls girl until she puts on the colours and boots, then look out. She is not mad about the break. She is mad that she is out for the season! Children just keep on impressing you. Terry from Australia.
Kudos to you, big guy, for having the integrity to show the mistakes along with the successes in your work. Most don’t get that teaching is more than just showing what to do. What not to do is just as important. That’s what makes you and your channel stand out amongst many others. Well done, Chris. Keep up the good work. Thanks for your info, lessons, and definitely the entertainment! Merry Christmas to you, your bride, and those cute little shop assistants. 🎄 -Troy
I really like that little swivel lock. I’m going to use that more in the future. This is the second video I’ve seen today that shows mistakes. Refreshing to see that honesty instead of editing it out.
Chris, I've been watching you for a while now. Just wanted to let you know that I really enjoy your innovation. I'm finishing out a new shop right now and your developments and showing your mistakes are really helpful!
The lock is ingenious!! A LOT less material than the 'normal' french cleat locks shown around YT. Next house, next shop...I should have room for a tool wall. Right now my shop (single car garage) has the laundry room and a fire place down one side, the other has my lumber rack on the wall, a window, a man door, and a large shelf. Against the wall are all my tools. Back wall has my clamp racks, a TV, table saw sled storage and my mechanic tool box. Sooo, no room. I have to start organizing my ideas someday, or I'll forget them... Great job Chris, thanks for sharing.
I Normally never comment on videos but what I do like about your videos is your real!! You don't make things seem perfect because no one is perfect. You are an awesome wood worker and please continue doing videos.
Thanks for the video. I built one holder for trim saws, but it usually came off the wall when removing the tool from the wall plus it didn’t seem that secure on the wall anyway . Your ideas much better.......... and safer. Thanks
Good evening Chris. I don't think I've seen anyone else take such an approach at sanding down the sharp edges on their cleat system like you do it's aesthetically pleasing. I think it's an awesome concept so much so that I got inspired to do the same. Thanks for the inspiration, and keep up the good work brother.
Made my first tool holder version 1 today! All scraps and it turned out decent! It will be a huge help in the long journey of organizing the shop for the first time to start getting it officially set up!
Just found this channel and pretty pumped since all my cordless tools are makita. So grateful for high school construction jobs so I know what I wanted as an adult. Sweet vid, gonna make these for sure
Man! I clicked through just looking at circular saw storage ideas...and you kept saying "CA" glue. I had no idea what that was until now. I researched that, and followed through to Starbond to order myself some. It looks like you have a favourite strength / viscosity, so I ordered the exact same one! Thanks so much for this great discovery!
Jason glad to hear you got yourself one of my favorite tools man. You’re gonna love this stuff. Appreciate your perseveres on ordering it and thanks for the comment brother hope you’re doing well
Good designs mate. That little screw in tab on the jigsaw holder that stops the whole thing lifting off is both very simple and very clever. Many french cleat designs have a similar issue and I've never seen someone solve it.
Nice confession on your mistakes Chris, it just goes to show that even the best of us makes mistakes from time to time. After all we are only human!!!. Keep up the great work Chris as alway's 💯% 👍🇬🇧
I enjoy your website. I watched your December 15 2020 video on Improved Cordless Tool Holders and noted the common issue of the jig coming off the cleat when you remove a tool. My solution is very easy and effective. I like to use 1/2” hardwood dowels for my jigs when they are called for. The hole can be drilled right through the jig plate and hanging cleat at whatever angle it needs to be for the tool. A little glue before assembly keeps them in place.
I enjoy your website. I watched your December 15 2020 video on Improved Cordless Tool Holders and noted the common issue of the jig coming off the cleat when you remove a tool. My solution is very easy and effective. {I had to re-post to get the middle content to show. It originally had bullets, which didn't work} With a piece of wall cleat material snugged up under the jig, draw a line on the back of the jig under the wall cleat. From the back of the jig, drill a 1/8” hole through the jig. Countersink the hole on the front of the jig. Install a #6 countersink screw that is about 1/8” or so longer than the thickness of your jig plate. With the jig on the wall, the screw is easy to drive gently into the hole and the tip of the screw protrudes just under the wall cleat, holding the jig in place. To move the jig, it is a simple matter to back out the screw just enough to have the tip draw back into the jig plate, then re-drive it when the jig is in its new location. Besides the ease of use, no hole marks are left on the wall cleat. This cleat is for my cordless drills, which I hang upside down on the flange into which the battery fits. I like to use 1/2” hardwood dowels for my jigs when they are called for. The hole can be drilled right through the jig plate and hanging cleat at whatever angle it needs to be for the tool. A little glue before assembly keeps them in place.
Thanks for this well timed video. I'm trying to reevaluate my limited storage space and my circular and jig saws need cleats instead of bench shelf space. I think I might try to work jig saw blade storage for my cheap blades into the holder as well. Thanks for the designs, I've not seen a jig saw cleat holder before.
Nice! I made mine with the jigsaw flat to the wall so it won’t stick out so far as the cleat is over my workbench. I’ve started including accessory storage as well with a small cubby (with magnet) to hold the extra blades.
I will say on the starbond stuff, it's quite obviously a good product, all the woodworkers are using it I watch. I like the double glue technique too. I hate to wait for effing wood glue to dry. I have multiple pieces setting in my shop right now. ugh.
Thanks, Chris. I like those bench cookies, I ordered some for myself. I've been using the CA glue to help me with glue ups since I learned it from you!
Nice job Chris. It's nice to see some of the mistakes made during the build and ways to correct them. A lot of UA-camrs only show the perfectly built final project. We all know working with wood, nothing is "exact" as the wood moves with the elements. Hope you and the family have a wonderful Christmas. Be safe my friend.
Love the ideas. Love the energy level. Love the attitude. Seems a little overkill though don't you think? CA glue, wood glue, Brad nails, screws… That's that's not coming apart! Lol😂
Great improvement on the circular saw holder. Sometimes you gotta do something wrong before you can do it right. "The greatest teacher, failure is." - Yoda I was getting ready to comment on that driver holder when you mentioned it. Driver or drill bits sticking out like that are definitely not a good thing. I like the style that a lot of makers use with either a four-inch PVC tube or some wooden edges that hold a driver with the bit facing the wall, and some room for shelving above (that's usually used for bit, screw, or battery storage). Looking forward to your take on the driver holder.
Chris, I have watched so many of these wood cleat videos. You are by far the "Best" in my opinion. Plus, its so obvious you have tremendous enthusiasm which inspires me to follow your ideas and tips! From: Steve in So Cal
@@AGlimpseInside I am buying a new home and I really want to follow your incredible videos. My first build will be a mobile work bench then a French cleat wall with your ideas!
Great idea for the jig saw. Thanks for the great ideas!! Going to pick up some of those cookies too. Question: Do you have any holder videos for things like pump plyers, adjustable (crescent) wrenches, pipe wrenches, and other various other DYI'er tools us retired dudes have around?? Thanks so much Chris.
The cleat lock idea is very cool. I saw your other video about the lock bits you put above the cleat which also works great, but this one looks cooler. 😝
I also have a saw stop 3hp and to my knowledge the only way to trigger that brake is to touch it with your hands or by sawing conductive materials with your hands or a conductive material like treated wood that still is damp from being treated. Running that piece of wood with the pocket hole screw in it only sparked like any sawblade does when it cuts metal, you're hands were on the wood piece and it's not conductive. I've cut through embedded nails on my table saw accidently and gotten sparks like you did. Trivial to mention but I think that's what you meant. I watch all your videos and enjoy them all. keep the contact flowing my friend.
The cleat system looks like it's working for you. Been thinking about changing to it but not there yet. But when I do I will be looking at some of your ideas for sure. Merry christmas and a happy new year to you and your family. Stay safe
Thanks! I quite enjoy your videos and as others have stated, I appreciate your honesty! We all make mistakes as woodworkers and learn as we go. I wanted to ask where do you get the low profile screws and the driver bits you use?
Hey man I love this, I would place a piece of wood or two to cover the blade of the jigsaw in case a cable or a hand or anything falls doesn't hit the blade but the wood. You are an inspiration man, thanks for the vid.
I got sparks the other day from the pin nailer! I'm not sure, but I guess one pin collided with another inside the wood! 😂 It scared the hell out of me! 😂
Awesome video as always, brother. You mentioned suggestions for tool holders and that you've gotten caught on the drill bits so, here it goes. I know it would take a bit more space, but you could make them to hold your drills and drivers flat against the wall if you want to store them with the bits still mounted. To save a bit on space, you can put the holders going diagonally up towards the right, so the drill bit on the drill to the right and up would be over the other drill/driver, and still sort of saving you some space.
@@kumosworkshop No worries but it’s been a long time coming for me to fix that problem. I’m not sure if you watched the updated video but I did say that I may or may not have been scraped in the face with a drill bit LOL
Hi Chris, I came across on recommendation from Stumpy....(James). I am glad I did! I love your humility, your humour and your honesty! Just like Stumpy I am learning heaps from you, your admission of mistakes and how you rectify them - gold! Also love your innovations and how you often involve your family...wonderful! They are gone too soon - enjoy them! Only wish I could make everything as fast as your videos! I am about to launch into a french cleat system wall and will be referencing your vids a lot! Only wish we had the selection of ply's and tools available here in New Zealand! Power to you and keep your excellent videos coming. Subscribed and Notification activated!
Awesome glad you’re here brother thank you so much. I appreciate the kind words nice to know the reach is going all the way down there. Hope you guys are doing well and I hope you have a good summer this winter
I had to take a second look and I had to intensely watch the rest of your video because when you were cross-cutting at 9:15 it looks like you had cut your index finger off at some point. Watched the rest and I was glad to see you had all your digits!!
I've seen those sparks before! The first time I used my corner spline jig I blasted some screws I put just a _bit_ too low. I cut through *two* before I figured out what was happening. Turns out I should have used glue instead. 🙄
Another informative video.....Thanks I like how the jig saw stands out from the base so I could leave the blade engaged. I also liked the trim saw, how you mounted it with a slot for the blade! You do so many creative constructions w/French cleats! I’m open for any ideas you come up with. Those narrow screws you use, who makes those? Where do you live? What state? I live in NW Oregon, wondering where to get those screws..... I’m planning on ordering some Starbond glue & activator. I have used Rockler ca glue for a decade or two but am almost out. Is it comparable to Starbond? Thank you for your expertise......& I love seeing you interacting with your daughter.
Fantastic info. I'm just getting started with woodworking and am ready to build the French cleat wall in my garage. The walls are drywalled and I will be installing the plywood over the drywall. Would you recommend 3/4" Baltic birch or can I get away with 1/2"? I'll be using 3/4" for the cleats but didn't know if I can get away with 1/2" for the walls themselves. Thanks for the inspiration your videos supply!
I'd suggest a small penholder or similar on the side of the jigsaw holder for extra blades. That way you would have everything that belong together close by. Not sure about doing the same for circular saw though. Those blades are more bulky and you might use the same size for the table saw?
Thanks Chris for the awesome video. I notice when you use the CA activator you spray the outside after attaching the pieces. Does that really wick into the joint? Assuming it does since you do it that way, pretty cool. Thanks again, keep them coming love to watch these.
Yes sir it sure does the activator is super thin. Sinners in water almost like alcohol. So it gets into the joint and does exactly what I need to do awesome stuff!
Interesting at the end when you happened to catch a glimpse of the drill-drivers with the bits in them. The first thing I thought was, "that's going to catch somebody walking by or grabbing for a tool". Every other drill-driver holder that I've seen has the chuck either pointed to the wall or pointed down. It's much safer that way and, quite frankly, much easier to grab a tool that way.
I think the fact that the screw didn't trigger you Sawstop was the fact that you were not connected with it. If you were in some way electrically connected to the screw it would have triggered. If you run wet wood through the saw you are holding it and that way you are connected. Also do you know of a jig that allow you to drill the holes super square that would allow you to make top like the one on your Armor table?
Great video! Glad to see you show our teachable moments when creating and building. What model of SawStop do you have? Are you using the commercial version of the saw? I am looking to get a cabinet style saw. Thanks and thanks for the share.
I fight with my miter saw all the time. I have to check the angle with a square all the time, 45 and 90. So, I use my table saw miter gauge. I pretty much only use my miter saw when cutting large boards, like 2”x8” boards for a park bench I built for our median in the HOA. How do you cut angles on large boards?
Careful to not tick the edge of the aluminum on your new meter gage...that will trip the brake for sure ! I saw someone tick the incra and cost him a blade and brake. I just made an extra long sacrificial MDF fence for mine so I need not get it even close.
First I love the design of the saw holders. Curious about 1 thing. The cleat to tool holder fastening was with brads and glue. This is where the rubber meets the road. The sides of the box you use screws now it’s is also important but… Be assurd I am not critsizing. In fact , I think most cleat wall tool holders are way over built including mine. We use 3/4 plywood where 1/4 would likely be fine. I am just curious on your rational.
I agree. Half inch is probably the most economical and strong for the money. Just so happens that three-quarter inch Just has a bunch of insurance built-in
Next time could you show us the design process to create the holder/hanger? Most of us know how to make things once we have a design but arriving at a design could be tricky, as you just demonstrated.
Love how candid you are about your mistakes, Chris... it makes the info so much more educational for DIY rookies like me 👍👏
Agree, as someone relatively new to woodworking after a long break it's good to see these kinds of things so they are in our minds as we do our thing. 😀
Shop organization is a continuous cycle of use and improvement! Glad to see someone else is not afraid to revise their approach as well. Thanks Chris.
Thanks for showing the mistakes. Good learning example for those of us watching.
Thank you for putting in the screw incident. We all need reminding that we do risky things because of familiarity our tools and our trade. The saw stop did not operate because that particular screw was totally insulated by the wood. They used to call devices like the saw stop "Earth LEAKAGE circuit breakers" because they broke the power from the circuit if it detected any current going to earth. In reality they looked for an imbalance between the two power wires and triggered the breaker. In the case of the saw stop the device triggers the braking device.
Back on children again. Just got a message to say my 12 year old grand daughter broke her thumb during a late tackle in Rugby League. She is a real girls girl until she puts on the colours and boots, then look out. She is not mad about the break. She is mad that she is out for the season! Children just keep on impressing you.
Terry from Australia.
I agree with Craig Phillips...drills with bits still in sticking out from the wall...I would have my eye out on them !!
Kudos to you, big guy, for having the integrity to show the mistakes along with the successes in your work. Most don’t get that teaching is more than just showing what to do. What not to do is just as important. That’s what makes you and your channel stand out amongst many others. Well done, Chris. Keep up the good work. Thanks for your info, lessons, and definitely the entertainment! Merry Christmas to you, your bride, and those cute little shop assistants. 🎄 -Troy
Thank you for showing real life, mistakes and all. Great new design on the circ saw holder.
Nice job! As far as the mistakes, it just shows your human like the rest of us.
I really like that little swivel lock. I’m going to use that more in the future. This is the second video I’ve seen today that shows mistakes. Refreshing to see that honesty instead of editing it out.
Mistakes happen why not leave a man you know I mean come on every other content creator in the world. LOL
Chris, I've been watching you for a while now. Just wanted to let you know that I really enjoy your innovation. I'm finishing out a new shop right now and your developments and showing your mistakes are really helpful!
I love how you show your mistakes, that helps also. Thank you!
The lock is ingenious!! A LOT less material than the 'normal' french cleat locks shown around YT. Next house, next shop...I should have room for a tool wall. Right now my shop (single car garage) has the laundry room and a fire place down one side, the other has my lumber rack on the wall, a window, a man door, and a large shelf. Against the wall are all my tools. Back wall has my clamp racks, a TV, table saw sled storage and my mechanic tool box. Sooo, no room. I have to start organizing my ideas someday, or I'll forget them... Great job Chris, thanks for sharing.
Glad you got something out of it slapjam I appreciate the kind words and I hope you’re able to get your shop up!
I respect a man who is honest about his mistakes. Great work Chris. 👍🏻
I like it that you leave the mistakes in! Thank you!
I Normally never comment on videos but what I do like about your videos is your real!! You don't make things seem perfect because no one is perfect. You are an awesome wood worker and please continue doing videos.
You are sooo awesome.
I just can’t thank you enough for sharing how to store tools in such a neat and tidy way.
Thanks for your honesty. Keep the process real (all the good, and bad details)
The hole design is what I went with for my saw. It really helps to plop the saw into the cleat shelf with the blade extended or retracted.
Thanks for the video. I built one holder for trim saws, but it usually came off the wall when removing the tool from the wall plus it didn’t seem that secure on the wall anyway . Your ideas much better.......... and safer. Thanks
The projects I like are the French cleats because of the unique use. Your videos are really entertaining to watch. The kids are great too!
Good evening Chris. I don't think I've seen anyone else take such an approach at sanding down the sharp edges on their cleat system like you do it's aesthetically pleasing. I think it's an awesome concept so much so that I got inspired to do the same. Thanks for the inspiration, and keep up the good work brother.
Made my first tool holder version 1 today! All scraps and it turned out decent! It will be a huge help in the long journey of organizing the shop for the first time to start getting it officially set up!
Just found this channel and pretty pumped since all my cordless tools are makita. So grateful for high school construction jobs so I know what I wanted as an adult. Sweet vid, gonna make these for sure
I actually like that you recognize, admit and then fix your mistakes. Good video.
Man! I clicked through just looking at circular saw storage ideas...and you kept saying "CA" glue. I had no idea what that was until now. I researched that, and followed through to Starbond to order myself some. It looks like you have a favourite strength / viscosity, so I ordered the exact same one! Thanks so much for this great discovery!
Jason glad to hear you got yourself one of my favorite tools man. You’re gonna love this stuff. Appreciate your perseveres on ordering it and thanks for the comment brother hope you’re doing well
Love the low-key use of the pencil trick when doing tiny pieces on the crusts cut sled. That’s thinking with your dipstick Jimmy!
Dude, thanks for making us all feel human with that ooops. Stuffs happens for sure!
Good designs mate. That little screw in tab on the jigsaw holder that stops the whole thing lifting off is both very simple and very clever. Many french cleat designs have a similar issue and I've never seen someone solve it.
Thank you so much. We’re all in this together man. Trying to share what we can. Hope you’re doing well sir
Great stuff Chris. Keep innovating and improving. Merry Christmas to you and yours and I look forward to further content in the New Year.
Brilliant video, it's definitely given me food for thought, your video's are very inspiring 👍👍👍👍
Excellent video. Thank you for all of your ideas.
As always a great video my Brother!! Love those projects that fix something that's been bugging you, I've got a few of those on my horizon as well!!
Nice confession on your mistakes Chris, it just goes to show that even the best of us makes mistakes from time to time.
After all we are only human!!!.
Keep up the great work Chris as alway's 💯% 👍🇬🇧
I enjoy your website. I watched your December 15 2020 video on Improved Cordless Tool Holders and noted the common issue of the jig coming off the cleat when you remove a tool. My solution is very easy and effective.
I like to use 1/2” hardwood dowels for my jigs when they are called for. The hole can be drilled right through the jig plate and hanging cleat at whatever angle it needs to be for the tool. A little glue before assembly keeps them in place.
That would be the "shoe" of the circular saw. Been digging your videos. Currently building out my cleat tool wall. Thanks for all the inspiration.
I enjoy your website. I watched your December 15 2020 video on Improved Cordless Tool Holders and noted the common issue of the jig coming off the cleat when you remove a tool. My solution is very easy and effective. {I had to re-post to get the middle content to show. It originally had bullets, which didn't work}
With a piece of wall cleat material snugged up under the jig, draw a line on the back of the jig under the wall cleat.
From the back of the jig, drill a 1/8” hole through the jig.
Countersink the hole on the front of the jig.
Install a #6 countersink screw that is about 1/8” or so longer than the thickness of your jig plate.
With the jig on the wall, the screw is easy to drive gently into the hole and the tip of the screw protrudes just under the wall cleat, holding the jig in place.
To move the jig, it is a simple matter to back out the screw just enough to have the tip draw back into the jig plate, then re-drive it when the jig is in its new location.
Besides the ease of use, no hole marks are left on the wall cleat.
This cleat is for my cordless drills, which I hang upside down on the flange into which the battery fits.
I like to use 1/2” hardwood dowels for my jigs when they are called for. The hole can be drilled right through the jig plate and hanging cleat at whatever angle it needs to be for the tool. A little glue before assembly keeps them in place.
Thanks for this well timed video. I'm trying to reevaluate my limited storage space and my circular and jig saws need cleats instead of bench shelf space. I think I might try to work jig saw blade storage for my cheap blades into the holder as well. Thanks for the designs, I've not seen a jig saw cleat holder before.
You’re welcome Frank. I’m really glad You got something out of it brother. Take care my friend
Nice! I made mine with the jigsaw flat to the wall so it won’t stick out so far as the cleat is over my workbench. I’ve started including accessory storage as well with a small cubby (with magnet) to hold the extra blades.
I will say on the starbond stuff, it's quite obviously a good product, all the woodworkers are using it I watch.
I like the double glue technique too. I hate to wait for effing wood glue to dry. I have multiple pieces setting in my shop right now. ugh.
Thanks, Chris. I like those bench cookies, I ordered some for myself. I've been using the CA glue to help me with glue ups since I learned it from you!
Good video. I'm going to try this too
Nice job Chris. It's nice to see some of the mistakes made during the build and ways to correct them. A lot of UA-camrs only show the perfectly built final project. We all know working with wood, nothing is "exact" as the wood moves with the elements. Hope you and the family have a wonderful Christmas. Be safe my friend.
Merry Christmas to you Jeff. Yeah I just try to keep as many mistakes in there as possible I mean, they happen so why not let them be public knowledge
I think this is the first video I’ve ever seen to mention both rockler and woodcraft. Props for not being sponsored (right?).
Love the ideas. Love the energy level. Love the attitude. Seems a little overkill though don't you think? CA glue, wood glue, Brad nails, screws…
That's that's not coming apart! Lol😂
Great ideas, Chris. As soon as my left shoulder is back in commission. I'm going to be putting up my cleats. Great choice of cordless tools.
Really nice work, Chris! 😃
Well done! 😃
Stay safe there with your family! 🖖😊
An add for the jig saw holder, the upper section make a storage for more bits &/or tools.
Chris, appreciate your honesty on your mistakes! We all make some and by sharing maybe..just maybe, I won’t make that one. Thank you
Great stuff Chris
If I ever get the wall space in my tiny shop
After seeing the video that Stumpy Nubs posted about your family, I bought a t-shirt from your store! God bless you and your family :-)
Trial and error my friend! Came out great!! Wishing you and your lovely Family a Merry Christmas!
very cool project
Great improvement on the circular saw holder. Sometimes you gotta do something wrong before you can do it right. "The greatest teacher, failure is." - Yoda
I was getting ready to comment on that driver holder when you mentioned it. Driver or drill bits sticking out like that are definitely not a good thing.
I like the style that a lot of makers use with either a four-inch PVC tube or some wooden edges that hold a driver with the bit facing the wall, and some room for shelving above (that's usually used for bit, screw, or battery storage).
Looking forward to your take on the driver holder.
Thanks will. Means a lot you give me the information plus a Yoda quote is perfect. Love it
Great job as always👍🏻👍🏻👍🏻
Nice video keep it up im learning a lot we you...thanks for your time and help...
Thank you brother I appreciate the words
Chris, I have watched so many of these wood cleat videos. You are by far the "Best" in my opinion. Plus, its so obvious you have tremendous enthusiasm which inspires me to follow your ideas and tips! From: Steve in So Cal
Thank you so much do you that really does mean a lot. I hope you’re doing well out there on the West Coast my man
@@AGlimpseInside I am buying a new home and I really want to follow your incredible videos. My first build will be a mobile work bench then a French cleat wall with your ideas!
Sounds awesome. Thank you so much
Great idea for the jig saw. Thanks for the great ideas!! Going to pick up some of those cookies too. Question: Do you have any holder videos for things like pump plyers, adjustable (crescent) wrenches, pipe wrenches, and other various other DYI'er tools us retired dudes have around?? Thanks so much Chris.
First video I saw from your channel...
I learned a lot
I like the idea of a drill holder that will store them with bits installed is great in profile.
The cleat lock idea is very cool. I saw your other video about the lock bits you put above the cleat which also works great, but this one looks cooler. 😝
I also have a saw stop 3hp and to my knowledge the only way to trigger that brake is to touch it with your hands or by sawing conductive materials with your hands or a conductive
material like treated wood that still is damp from being treated. Running that piece of wood with the pocket hole screw in it only sparked like any sawblade does when it cuts metal, you're hands were on the wood piece and it's not conductive. I've cut through embedded nails on my table saw accidently and gotten sparks like you did. Trivial to mention but I think that's what you meant. I watch all your videos and enjoy them all. keep the contact flowing my friend.
The cleat system looks like it's working for you. Been thinking about changing to it but not there yet. But when I do I will be looking at some of your ideas for sure. Merry christmas and a happy new year to you and your family. Stay safe
Thanks man I appreciate the consideration. It’s pretty fun to makes everything so much easier to move around when you need to
Nice upgrades
Mr french cleat... I look forward to seeing your next video on the topic.
Thanks! I quite enjoy your videos and as others have stated, I appreciate your honesty! We all make mistakes as woodworkers and learn as we go. I wanted to ask where do you get the low profile screws and the driver bits you use?
I like the lock for the cleat
Merry Christmas!
Hey man I love this, I would place a piece of wood or two to cover the blade of the jigsaw in case a cable or a hand or anything falls doesn't hit the blade but the wood. You are an inspiration man, thanks for the vid.
I totally see what you’re saying that’s a great idea. Thanks for the info brother I appreciate it you inspired me
Super scary to see sparks when you're not expecting them!
Sure is Tony. I need to go inside and change my underwear. Hahahaha.
I got sparks the other day from the pin nailer! I'm not sure, but I guess one pin collided with another inside the wood! 😂
It scared the hell out of me! 😂
@@AGlimpseInside little scare squirt, no shame. haha
Love these, I’ve made a few similar
Awesome video as always, brother. You mentioned suggestions for tool holders and that you've gotten caught on the drill bits so, here it goes. I know it would take a bit more space, but you could make them to hold your drills and drivers flat against the wall if you want to store them with the bits still mounted. To save a bit on space, you can put the holders going diagonally up towards the right, so the drill bit on the drill to the right and up would be over the other drill/driver, and still sort of saving you some space.
ua-cam.com/video/3B9acWX1Mvk/v-deo.html
I revamped the entire system last week or so check it out brother I think you’ll like it
@@AGlimpseInside oh wow, I hadn’t noticed this video was 8 months ago. Well, this is awkward. XD
@@kumosworkshop No worries but it’s been a long time coming for me to fix that problem. I’m not sure if you watched the updated video but I did say that I may or may not have been scraped in the face with a drill bit LOL
@@AGlimpseInside oof. Glad to see on your newer videos that you still got both your eyes.
Cool! Wish I had your talent. God Bless.
Hi Chris, I came across on recommendation from Stumpy....(James). I am glad I did! I love your humility, your humour and your honesty! Just like Stumpy I am learning heaps from you, your admission of mistakes and how you rectify them - gold! Also love your innovations and how you often involve your family...wonderful! They are gone too soon - enjoy them! Only wish I could make everything as fast as your videos! I am about to launch into a french cleat system wall and will be referencing your vids a lot! Only wish we had the selection of ply's and tools available here in New Zealand! Power to you and keep your excellent videos coming. Subscribed and Notification activated!
Awesome glad you’re here brother thank you so much. I appreciate the kind words nice to know the reach is going all the way down there. Hope you guys are doing well and I hope you have a good summer this winter
I had to take a second look and I had to intensely watch the rest of your video because when you were cross-cutting at 9:15 it looks like you had cut your index finger off at some point. Watched the rest and I was glad to see you had all your digits!!
I've seen those sparks before! The first time I used my corner spline jig I blasted some screws I put just a _bit_ too low. I cut through *two* before I figured out what was happening. Turns out I should have used glue instead. 🙄
Yeah it’s some scary stuff for sure
Another informative video.....Thanks I like how the jig saw stands out from the base so I could leave the blade engaged. I also liked the trim saw, how you mounted it with a slot for the blade! You do so many creative constructions w/French cleats! I’m open for any ideas you come up with. Those narrow screws you use, who makes those? Where do you live? What state? I live in NW Oregon, wondering where to get those screws..... I’m planning on ordering some Starbond glue & activator. I have used Rockler ca glue for a decade or two but am almost out. Is it comparable to Starbond? Thank you for your expertise......& I love seeing you interacting with your daughter.
I hadn't seen this one. Before the tool storage products hit the market.
Fantastic info. I'm just getting started with woodworking and am ready to build the French cleat wall in my garage. The walls are drywalled and I will be installing the plywood over the drywall. Would you recommend 3/4" Baltic birch or can I get away with 1/2"? I'll be using 3/4" for the cleats but didn't know if I can get away with 1/2" for the walls themselves. Thanks for the inspiration your videos supply!
Olá, vídeo agradável de assistir e muito interessante... Obrigado por compartilhar e Forte abraço ... 🛠️👍🏼
I'd suggest a small penholder or similar on the side of the jigsaw holder for extra blades. That way you would have everything that belong together close by.
Not sure about doing the same for circular saw though. Those blades are more bulky and you might use the same size for the table saw?
Thanks Chris for the awesome video. I notice when you use the CA activator you spray the outside after attaching the pieces. Does that really wick into the joint? Assuming it does since you do it that way, pretty cool. Thanks again, keep them coming love to watch these.
Yes sir it sure does the activator is super thin. Sinners in water almost like alcohol. So it gets into the joint and does exactly what I need to do awesome stuff!
The screw not tripping the saw was due to it floating within the wood and not completing the circuit. It was completely isolated
Way Cool!
Interesting at the end when you happened to catch a glimpse of the drill-drivers with the bits in them.
The first thing I thought was, "that's going to catch somebody walking by or grabbing for a tool". Every other drill-driver holder that I've seen has the chuck either pointed to the wall or pointed down. It's much safer that way and, quite frankly, much easier to grab a tool that way.
Very cool stuff Chris. It’s important to leave in those lil “oops” moments so we all learn.
I think the fact that the screw didn't trigger you Sawstop was the fact that you were not connected with it. If you were in some way electrically connected to the screw it would have triggered. If you run wet wood through the saw you are holding it and that way you are connected. Also do you know of a jig that allow you to drill the holes super square that would allow you to make top like the one on your Armor table?
I’m actually in the process of making a jig. Thinking of putting them on my website as well. That’s a good point as well about the screw
Chris The Cleat Whisperer never disappoints.
Nice upograde for tool holders, thanks for sharing... but you did cut your fence a bit at 11:24 :)
Nice design for the circ saw holder. I'm liking those low profile screws - do you know if we can buy these in the UK (at a reasonable price...)?
I wish I had a good enough wall to put my tools on to.
Make the jigsaw holder nearer the cleat wall and cut a slot for the blade, you could make it quite a bit nearer.
Great video! Glad to see you show our teachable moments when creating and building. What model of SawStop do you have? Are you using the commercial version of the saw? I am looking to get a cabinet style saw. Thanks and thanks for the share.
It’s the 3 hp cabinet master. Thanks for the nice words will mark I hope you’re doing well
It was the "Top 5 Reasons To Make Stuff".......I've been making stuff for family and friends ever since!!
I fight with my miter saw all the time. I have to check the angle with a square all the time, 45 and 90. So, I use my table saw miter gauge. I pretty much only use my miter saw when cutting large boards, like 2”x8” boards for a park bench I built for our median in the HOA. How do you cut angles on large boards?
Careful to not tick the edge of the aluminum on your new meter gage...that will trip the brake for sure ! I saw someone tick the incra and cost him a blade and brake. I just made an extra long sacrificial MDF fence for mine so I need not get it even close.
Cool
First I love the design of the saw holders.
Curious about 1 thing. The cleat to tool holder fastening was with brads and glue. This is where the rubber meets the road. The sides of the box you use screws now it’s is also important but…
Be assurd I am not critsizing. In fact , I think most cleat wall tool holders are way over built including mine. We use 3/4 plywood where 1/4 would likely be fine.
I am just curious on your rational.
I agree. Half inch is probably the most economical and strong for the money. Just so happens that three-quarter inch Just has a bunch of insurance built-in
Awesome project. Appreciate the errors. Merry Christmas ❤️✝️🪚
Thanks man. Merry Christmas to you and your family as well
Does the French pocket work with open wall frames?
Next time could you show us the design process to create the holder/hanger? Most of us know how to make things once we have a design but arriving at a design could be tricky, as you just demonstrated.
I’ll definitely try to incorporate that in future builds absolutely
I too am hooked on French cleats but! In the UK ply has become so expensive. Is MDF a sensible alternative?