I tried so many different tutotials and I was only getting a yellow screen. Go it to work with yours, I just had to copy the files and create an EMUMMC, since it wasn't jailbroken before, and it worked. Thank you sir.
Nice video! Easy to understand and straight to the point with a detailed explanation step by step. I wish I found your vid when I was upgrading to 18.1.0 too but I managed to update it on my own, albeit with some errors (but I fixed it). I hope you'll make another video about updating to the latest version 19.0.0 when atmosphere is fully released and not on pre-released. You have my sub!
Thank you so much for your kind words! I'm glad you found the video helpful and easy to follow. It’s great to hear that you managed to upgrade to 18.1.0 on your own, even with some bumps along the way! I definitely plan to create a video for the update to 19.0.0 once it’s fully released. Your support means a lot-thanks for subscribing! Stay tuned!
since the current 'stock' FW is 19... now, is it possible/ok to have the sysnand on version 19.1... and have the emunand still on 18.... to use this cfw update process? or should/do they always have to match versions for both nands to work correctly? thanks, and great video, very easy to understand the process!! 😎
hi everything was working for me but when i get to the part when i boot EMUNAND i get stuck on the Nintendo switch logo and need to hard reset the console
Are you using a different custom firmware pack than the one before the update? There might be an issue with the script. Try checking the reference at the following link; it might help solve your problem. gbatemp.net/threads/switch-getting-stuck-at-logo-screen-during-boot-after-attempting-to-update-to-ams-1-7-1.659144/
I have never encountered an issue like that. However, based on the solutions I've read, try copying your custom firmware pack back to the SD card, and make sure to choose "overwrite" if prompted. Alternatively, you can check the video below for a solution, but it's not in English. ua-cam.com/video/9KEOTnraGjw/v-deo.htmlsi=4rYudLOgQp6huOwh
After update Nintendo swich to version 19.01 and boot in to Atmosphere at launch a game go to the network and ask for Nintento account. How to make games to play offline again...? Tanks.
If the Switch is running on CFW, it shouldn't ask for a server login. Try reinstalling the game.
2 місяці тому+1
Hi, I have one problem about my Nintendo Switch Oled. My Oled is have chip (Hwfly) and It was opening normally (with CFW) until yesterday, but when I opened it today, the Hekate menu did not appear and it only opened as OFW everytime. How can I solve this? 😭
This is a common issue. The cause is a loose connection to DAT 0. You need to take it to a repair shop that handles Nintendo Switch modchip installations
Please i need help as i got a blank screen after following the steps i have a NS v2 with SX Core modchip after transferring the files into the SD card i got blank screen and the chip led keeps flashing blue i used to have a CFW 17.01 with Atmosphere before that issue as i already moved from SC OS to Atmosphere earlier
Try removing the SD card and then turning on the Switch. If the same issue persists where the modchip light blinks, it’s likely a loose connection between the modchip and DAT0.
@@goplayfull Thank you so much , i toke my switch apart and as you said the solder was completely off since im re soldering it back again do u recommend keeping the SX CORE chip or since im already there i should go for a newer one.
Maybe you placed the file incorrectly. Make sure the firmware file is directly inside the firmware folder, not nested in additional folders. If it still doesn’t work, try downloading it again; the file might be corrupted.
What custom firmware pack are you using? If you have a HAT, you need to download one that supports firmware 19.00. You can download it from this link. www.mediafire.com/file_premium/5wfrbe6xusjx3p8/HATS-1.8.0-prerelease-V1.zip/file
@@necrozfynezt I figured it out, I still get that error but pushing power bottom lets me continue, the other issue I’m having now though is that whenever i put it into sleep mode or it goes into it on its own the switch basically shuts off completely, I have to hold down power for 10sec+, wait a few seconds then hold it again and it’ll power on into hekate
@gerardob7289 power doesn't work for me, but if I were in your shoes I woukd go into settings and change everything so that when it's in handheld ir docked it doesn't go to sleep. Mine already had that setting from when I changed my battery it gave incorrect readings and I've had to calibrate it by doing that and letting it drain, etc. Perhaps I woukd have the issue but my sleep is turned off. Hopefully when atnosphere is fully updated everything will return to normal. This video was helpful for the hats pack I've never had that before. Just wish it solved my problem
Bro so far this is the best tutorial i have found on youtube you deserve allot more views! I have a few concerns. My cfw switch that i bought was already jailbroken and now i need to update it. It has some sort of tethered system. It is on AMS 1.5.2|S. When ever it powers off i have to turn it on via RCMU bootloader by injecting payload named fusee via pc. I dont know what method was used to jailbreak my switch its an old v1 BTW. Should i go ahead with this method to upgrade? Will it then become untethered and turn on from off without RCMU boot loader to inject pay load from pc tethering?
I don't have and have never done an update on a switch that requires a bootloader to be injected from a PC. So I don't have any experience with this. But I found a tutorial that might help you update your switch. ua-cam.com/video/jSLa3bVw5oc/v-deo.htmlsi=fvocHD88k8Z_xRRl
Sure, make sure you download the custom firmware pack for firmware 19.00 and not another version, as it can cause errors. What exactly is the issue with Tinfoil not working? What happens when you try to use it?
Hi, thanks for video. I have switch oled and want to update but i am stuck at 7 minutes in your video. When i click sysmmc i only get black screen and nothing happend (only solution is long press power button for turn off console) so i tried go directly to emummc, it ran with updated ams (1.7.1)E but when a tried (many times) update firmware to 18.1 (also tried 17.1) (i have 16.1) it will pass (by daybreak) but when console start everyhing is gone (it also deleted all game from emuMMC/SD00/nintendo/contents) and also doesnt show game what i have in system. Do you know where could be problem or why updating firmware always deleted all ( contents) Thanks
Hi! It sounds like you're facing a tough issue. Can I ask if the custom firmware pack you were using before is different from the one you’re trying to update with? If it is different, have you deleted the folders mentioned in the video? If you’ve done all that and are still having the same problem, you might want to try recreating your emuMMC from scratch. Just keep in mind that doing this will erase all your old data, including games and save files. Let me know how it goes!
@ Hi , first thanks for answer. Yes, it was different, but i deleted all folders what are in video. So i think have two solution, update only ams to 1.7.1 and leave firmware at 16.1.0 and have all data (Games), or update also firmware to 18.1.0 and redownload all games 🤔
Recreating emuMMC should be a last resort, so don't do it just yet. Try to find another way. Use the same custom firmware pack but with the latest version of Atmosphere that supports the firmware version you want to use.
Do you have any tips on how to fix: "A fatal error has occured when running Atmosphere. Program ID: 010041544d530000 Error Desc: std::abort() called (0xffe) Failed to save report to the SD card! (0007d202) The atmosphere directory may have improperly have archive bits set. Please try running an archive bit fixer tool."
update: going into hekate setting i was able to find the archive bit fixer tool in the settings and then was able to follow the rest of the video! Thanks
is there already an update for Ver. 19.0.1 FW? This is really simple to comprehend. I thought after installing the custom firmware, you have to boot the console to the official firmware and then update from there. such that it is no longer necessary.
The original firmware gets updated when we update via SysNAND. You can also update through the original firmware, but if you do it this way, you'll be directly updated to the latest version without the option to choose the update version. Like in this video, it will automatically update to version 19.xx. Meanwhile, I only want to update to version 18.xx.
@@goplayfull On the webpage. Only version 19.0.0 of the firmware is currently available. I've already updated the switch to that. I am still unable to go online because the most recent version is 19.0.1. Is it safe to manually update the OFW to 19.0.1 when the Jailbreak firmware is still 19.0.0, or is there another website where I can obtain the OFW 19.0.1? Thanks!!
Both OFW and CFW need to be on the same version. If you update your CFW to version 19, then you must also update your OFW to the same version. However, make sure that the custom firmware pack you are using, Atmosphere, supports version 19.00.
Yes, all jailbreak activities on the Switch can potentially lead to your console being banned. That’s why there are steps you can take to anticipate this, even though they don’t guarantee 100% protection from being banned.
Hi, I have a 17.0.1 OFW that has the PicoFly modchip. I updated to 19.0, and it went well, but I didn't know that Tinfoil wasn't working, so I tried to go back to 17.0.1. Now I'm getting errors when trying to open up CFW eMMC. I was wondering if there is any way I can factory reset my Switch that has a PicoFly chip? I don't care about my game saves.
Thank you so much! I really appreciate that you use the original sources instead of giving a single compressed file hosted by yourself.
I think this has been the best and easier tutorial that I have followed to update my switch.
I tried so many different tutotials and I was only getting a yellow screen. Go it to work with yours, I just had to copy the files and create an EMUMMC, since it wasn't jailbroken before, and it worked. Thank you sir.
your welcome
Im also getting a yellow screen when trying to update my emummc but I was able to update the sysmmc normally. WIll creating another emummc fix it?
The best tutorial so far that i see. Thank you!
Glad to hear it!
Love this all-in-one video and package! Thank you!
Awesome guide. I just bought a soft modded switch and this is really great step by step instructions.
Nice video! Easy to understand and straight to the point with a detailed explanation step by step. I wish I found your vid when I was upgrading to 18.1.0 too but I managed to update it on my own, albeit with some errors (but I fixed it).
I hope you'll make another video about updating to the latest version 19.0.0 when atmosphere is fully released and not on pre-released. You have my sub!
Thank you so much for your kind words! I'm glad you found the video helpful and easy to follow. It’s great to hear that you managed to upgrade to 18.1.0 on your own, even with some bumps along the way! I definitely plan to create a video for the update to 19.0.0 once it’s fully released. Your support means a lot-thanks for subscribing! Stay tuned!
BIG Thanks!! to this Video I've already install the latest firmware using this guide. Even though I have 0 knowledge on updating 😁😁😁
Thanks alot!
You're welcome!
1.6 to this 1.8 thaanks ! only payload i have is fusebin before where is safest to play the game now
since the current 'stock' FW is 19... now, is it possible/ok to have the sysnand on version 19.1... and have the emunand still on 18.... to use this cfw update process? or should/do they always have to match versions for both nands to work correctly? thanks, and great video, very easy to understand the process!! 😎
It is not recommended to run EmuNAND with a firmware version different from the original firmware. Ideally, both should be the same.
Good Job!
Thanks!
hi everything was working for me but when i get to the part when i boot EMUNAND i get stuck on the Nintendo switch logo and need to hard reset the console
Are you using a different custom firmware pack than the one before the update? There might be an issue with the script. Try checking the reference at the following link; it might help solve your problem.
gbatemp.net/threads/switch-getting-stuck-at-logo-screen-during-boot-after-attempting-to-update-to-ams-1-7-1.659144/
this was awesome, thanks! any advice on fixing the "emuMMC is forced but not enabled" error?
I have never encountered an issue like that. However, based on the solutions I've read, try copying your custom firmware pack back to the SD card, and make sure to choose "overwrite" if prompted. Alternatively, you can check the video below for a solution, but it's not in English. ua-cam.com/video/9KEOTnraGjw/v-deo.htmlsi=4rYudLOgQp6huOwh
Can I still do this if in my system says I have ATM 1.5.3 | S? Basically, I have an S at the end instead of an E
Yes, you can update to the latest version. I’ve made a new video about how to update Firmware/Custom Firmware to the new version 19.0.0.
Work on Nintendo switch oled chip/ emunand ?? I wonna play online on semi stock , but need update firmware, can’t open Nintendo shop
Yes, it works for all types of Switches that use a modchip.
After update Nintendo swich to version 19.01 and boot in to Atmosphere at launch a game go to the network and ask for Nintento account.
How to make games to play offline again...?
Tanks.
If the Switch is running on CFW, it shouldn't ask for a server login. Try reinstalling the game.
Hi, I have one problem about my Nintendo Switch Oled. My Oled is have chip (Hwfly) and It was opening normally (with CFW) until yesterday, but when I opened it today, the Hekate menu did not appear and it only opened as OFW everytime. How can I solve this? 😭
This is a common issue. The cause is a loose connection to DAT 0. You need to take it to a repair shop that handles Nintendo Switch modchip installations
You can try opening up other config instead of launch. That’s where my custom cfw ended up.
Please i need help as i got a blank screen after following the steps i have a NS v2 with SX Core modchip after transferring the files into the SD card i got blank screen and the chip led keeps flashing blue i used to have a CFW 17.01 with Atmosphere
before that issue as i already moved from SC OS to Atmosphere earlier
Try removing the SD card and then turning on the Switch. If the same issue persists where the modchip light blinks, it’s likely a loose connection between the modchip and DAT0.
@@goplayfull Thank you so much , i toke my switch apart and as you said the solder was completely off since im re soldering it back again do u recommend keeping the SX CORE chip or since im already there i should go for a newer one.
when I try uptading the firmware with daybreack it said that the validation failed
Maybe you placed the file incorrectly. Make sure the firmware file is directly inside the firmware folder, not nested in additional folders. If it still doesn’t work, try downloading it again; the file might be corrupted.
Im getting an error that says “unknown pkg1 version” and “hos version not supported”. My system is on version 19.0.0, I followed your video exactly:/
What custom firmware pack are you using? If you have a HAT, you need to download one that supports firmware 19.00. You can download it from this link.
www.mediafire.com/file_premium/5wfrbe6xusjx3p8/HATS-1.8.0-prerelease-V1.zip/file
@@goplayfullHow do we know what firmware is it??
I have the same problem but I haven't updated my firmware to 19. I can't boot atmosphere 😢
@@necrozfynezt I figured it out, I still get that error but pushing power bottom lets me continue, the other issue I’m having now though is that whenever i put it into sleep mode or it goes into it on its own the switch basically shuts off completely, I have to hold down power for 10sec+, wait a few seconds then hold it again and it’ll power on into hekate
@gerardob7289 power doesn't work for me, but if I were in your shoes I woukd go into settings and change everything so that when it's in handheld ir docked it doesn't go to sleep. Mine already had that setting from when I changed my battery it gave incorrect readings and I've had to calibrate it by doing that and letting it drain, etc. Perhaps I woukd have the issue but my sleep is turned off. Hopefully when atnosphere is fully updated everything will return to normal. This video was helpful for the hats pack I've never had that before. Just wish it solved my problem
Work this on switch lite
Bro so far this is the best tutorial i have found on youtube you deserve allot more views! I have a few concerns. My cfw switch that i bought was already jailbroken and now i need to update it. It has some sort of tethered system. It is on AMS 1.5.2|S. When ever it powers off i have to turn it on via RCMU bootloader by injecting payload named fusee via pc. I dont know what method was used to jailbreak my switch its an old v1 BTW. Should i go ahead with this method to upgrade? Will it then become untethered and turn on from off without RCMU boot loader to inject pay load from pc tethering?
I don't have and have never done an update on a switch that requires a bootloader to be injected from a PC. So I don't have any experience with this. But I found a tutorial that might help you update your switch.
ua-cam.com/video/jSLa3bVw5oc/v-deo.htmlsi=fvocHD88k8Z_xRRl
If you want to turn it on without injecting a payload from a computer, you need to install a mod chip like Picofly or similar.
@@goplayfull you are a life saver!
bonjour , j'ai la version 19 mais j'ai des erreurs avec DBI (version russe) et tinfoil ne fonction pas ,puis je appliqué ce tutoriel ?
Sure, make sure you download the custom firmware pack for firmware 19.00 and not another version, as it can cause errors. What exactly is the issue with Tinfoil not working? What happens when you try to use it?
How can you access Hekate w/o rcm?? I can only access mine with rcm
This is a Switch OLED with modchip. You cannot enter RCM. The modchip does this work for you.
@@panzoub Thanks but I figured it out. I just need to press - button when restarting switch 😅😅😅
Hope this tutorial can help you out
ua-cam.com/video/jSLa3bVw5oc/v-deo.htmlsi=o885cKpf7feEMcNB
Hi, thanks for video. I have switch oled and want to update but i am stuck at 7 minutes in your video. When i click sysmmc i only get black screen and nothing happend (only solution is long press power button for turn off console) so i tried go directly to emummc, it ran with updated ams (1.7.1)E but when a tried (many times) update firmware to 18.1 (also tried 17.1) (i have 16.1) it will pass (by daybreak) but when console start everyhing is gone (it also deleted all game from emuMMC/SD00/nintendo/contents) and also doesnt show game what i have in system. Do you know where could be problem or why updating firmware always deleted all ( contents) Thanks
Hi! It sounds like you're facing a tough issue. Can I ask if the custom firmware pack you were using before is different from the one you’re trying to update with? If it is different, have you deleted the folders mentioned in the video?
If you’ve done all that and are still having the same problem, you might want to try recreating your emuMMC from scratch. Just keep in mind that doing this will erase all your old data, including games and save files. Let me know how it goes!
@ Hi , first thanks for answer. Yes, it was different, but i deleted all folders what are in video. So i think have two solution, update only ams to 1.7.1 and leave firmware at 16.1.0 and have all data (Games), or update also firmware to 18.1.0 and redownload all games 🤔
Recreating emuMMC should be a last resort, so don't do it just yet. Try to find another way. Use the same custom firmware pack but with the latest version of Atmosphere that supports the firmware version you want to use.
Do you have any tips on how to fix:
"A fatal error has occured when running Atmosphere. Program ID: 010041544d530000 Error Desc: std::abort() called (0xffe)
Failed to save report to the SD card! (0007d202)
The atmosphere directory may have improperly have archive bits set.
Please try running an archive bit fixer tool."
update: going into hekate setting i was able to find the archive bit fixer tool in the settings and then was able to follow the rest of the video! Thanks
is there already an update for Ver. 19.0.1 FW?
This is really simple to comprehend. I thought after installing the custom firmware, you have to boot the console to the official firmware and then update from there. such that it is no longer necessary.
The original firmware gets updated when we update via SysNAND. You can also update through the original firmware, but if you do it this way, you'll be directly updated to the latest version without the option to choose the update version. Like in this video, it will automatically update to version 19.xx. Meanwhile, I only want to update to version 18.xx.
@@goplayfull On the webpage. Only version 19.0.0 of the firmware is currently available. I've already updated the switch to that. I am still unable to go online because the most recent version is 19.0.1. Is it safe to manually update the OFW to 19.0.1 when the Jailbreak firmware is still 19.0.0, or is there another website where I can obtain the OFW 19.0.1?
Thanks!!
Thank you both for the question and answer. I figured I wasn't the only one with the same question. So, thank you for the answer!
Hi sir. Can I update my switch without removing my SD card?
No, you need to remove the SD card as shown in this video.
why themes is not working to me.. im getting error
Follow the steps shown in the video. Connect the Switch to the internet first, then update it. Reboot, and then try installing the theme again.
I can't see the firmware 18.1.0. What can I do to see that firmware
Do you mean we can't see the firmware version anywhere? Is it after the update or...?
Do i need to have a hacked switch to do this?
Yes. Your Switch must already have a modchip installed.
thx Man i sub to you
I already have version 19, but when i go to ofw it said that i need to update the ofw, if i want to use ofw, am i allowed to update ofw software?
Both OFW and CFW need to be on the same version. If you update your CFW to version 19, then you must also update your OFW to the same version. However, make sure that the custom firmware pack you are using, Atmosphere, supports version 19.00.
@@goplayfull how to check if my custom formware is support 19.0?
Usually, there is a description, like this:
imgur.com/a/rN99g17
Hello I'm getting error that says " Failed to get update information. result : 0x00234a02" please help
What custom pack are you using? And what is the current firmware version of the switch? When does the error appear?
@ i Just follow the Instruction, but i think maybe the problem is i use mac not windows
@@RizkiHOK I'm getting exactly the same issue and I'm also using Mac. I'll do some research to see if that's the issue and how to solve it
I cant use internet in cfw, any fix?
What do you mean by 'can't use internet'? Are you unable to connect to Wi-Fi, or are you connected to Wi-Fi but can't access the internet?
Any news about ps4 Fw 11.50?
👍👍👍👍👍👍👍👍👍👍
Don't use this you will get banned from online services on your Switch meaning you can no longer transfer your pokemon between games.
Yes, all jailbreak activities on the Switch can potentially lead to your console being banned. That’s why there are steps you can take to anticipate this, even though they don’t guarantee 100% protection from being banned.
@goplayfull you'd be liable for any loss of services due to promoting this.
Hi, I have a 17.0.1 OFW that has the PicoFly modchip. I updated to 19.0, and it went well, but I didn't know that Tinfoil wasn't working, so I tried to go back to 17.0.1. Now I'm getting errors when trying to open up CFW eMMC. I was wondering if there is any way I can factory reset my Switch that has a PicoFly chip? I don't care about my game saves.
Hope this can help you
ua-cam.com/video/EXZP5hdxtnk/v-deo.html
Can I update my custom firmware from 16.1.0 to 18.1.0 ??
Yes you can
@@goplayfull thank you sir
Great guide, literally idiot proof