NZXT H9 Elite Black Gaming PC Complete Step-by-Step Guide on How To Build a PC
Вставка
- Опубліковано 15 чер 2024
- Here's how to build a Gaming PC using the NZXT H9 Elite, Lian Li Infinity Fans, AMD Ryzen AM5 Platform, and Vertical GPU Mount.
=============================
🛒 Products from Video - Using My Affiliate Links Helps Support This Channel ! TY 🔥🐺 beacons.ai/firewolftech
=============================
🔥🐺 Black Gaming PC Part List : amzn.to/3uJ4uDO 🐺🔥
NZXT H9 Elite Case
NZXT : bit.ly/h9-elite
Amazon : amzn.to/49AMMS0
BestBuy : bit.ly/48GfbEV
AMD Ryzen 9 7900X
Amazon : amzn.to/3Yu1bL2
Newegg : bit.ly/48ADlk5
GPU ROG RTX 4070 Super OC
Amazon : amzn.to/3PsietN
Newegg : bit.ly/49CpdYP
AIO NZXT Kraken Elite 360
NZXT : bit.ly/kraken360elite
Amazon : amzn.to/49rFQXf
RAM TeamGroup RGB DDR5
Amazon : amzn.to/45X6Qvo
MOBO Asus B650E-F
Amazon : amzn.to/45Xr9cc
FANS Lian Li Infinity Fans
Amazon : amzn.to/3TjaEUl
* One Triple Black, 6 Single Reverse Blade, 1 Standard Fan
RGB Cables Mobo
Amazon : amzn.to/3oEMPdq
RGB Cables GPU
Amazon : amzn.to/3TGZARb (These are skinnier and have 8 Light Guides)
* for the strimmer cable in this video, I can't find them in stock. it has 12 Light Guides and is wider, but I think the skinnier 8 Light Guide would look better. Didn't realize there was a difference until I saw my White Build.
NZXT Internal USB Hub 3
Amazon : amzn.to/4abaofK
===============================
Lighting ⚡Govee
===============================
Hexagon Light Panels : bit.ly/GoveeHexU
Corner Y Lights : bit.ly/GoveeYrgb
Behind Desk Lighting : bit.ly/m1LEDstrip
Time Stamps
Intro - 0:00
Parts List - 0:34
Motherboard Prep CPU - 7:45
Red AM5 Bracket - 9:10
RAM Install - 9:59
SSD Install - 11:54
NZXT H9 Elite Prep - 16:24
Motherboard Install - 23:10
Lian Li Control / Hub Prep - 24:44
Sl Infinity Fans - 30:24
Top Infinity Fans Install - 31:10
Rear Infinity Fan Install - 36:11
AIO Kraken Elite Prep - 38:09
AIO Pump CPU Install - 42:14
Prepping Vertical GPU Mount - 45:10
Bottom Infinity Fans Install - 46:32
Infinity Fans Cable Connection - 48:19
Power Supply Prep - 50:44
PSU Install - 53:54
Strimmer Cables - 57:14
Connecting Cables to Motherboard - 01:01:22
GPU 4070 Super Horizontal - 01:04:22
GPU Vertical Mount - 69:14
NZXT H9 Elite Final Assembly - 01:14:37
Powering ON - 01:16:00
Conclusion - 01:17:44
B-ROLL - 01:20:58
=============================
Follow my Socials
=============================
TikTok : / firewolftech
Instagram : / firewolftech
- Fire Wolf Tech
firewolftech.com
DISCLAIMER : This video contains affiliate links from which I may receive a small commission from sales of certain products. This helps support my channel so thank you for using my Affiliate Links. - Наука та технологія
You really tried to teach everyone how to build a PC step by step. The fact that I was on another tab ordering food while having your video run on the background and came back 16mins later and you're still on the motherboard shows that you are trying your best to teach everyone and explain every part and also how to install them step by step. 10/10 video🔥🔥🔥
I appreciate you comment 🔥 I was concerned that the video was too long, but I'm glad I stuck through it. I just wish I realized that all the sound was going through the left channel 🥲
I've been building computers for 30 years, and I must say that your training style is excellent. You go through every step and explain everything in an understandable manner. I am building a PC with pretty much the same specs, and I showed my customers your video to demonstrate how easy this hobby is. Excellent job, my friend.
Thanks for the feedback 🙏🏽 I really appreciate it ! I thought it would be too much, but remembered how many questions I might’ve had when I watched builds so I’m glad it was super helpful. Makes me want to do more tutorial builds 🔥
This video is so dang helpful! Went with almost the same build and it's awesome to have such a good a visual walkthrough! Thank you!!
Thanks for the feedback 🔥 I appreciate it and I’m glad the video was helpful !
Really enjoyed your video, and i respect that you showed every small step on the video like how to conect the small conectores and everything, not like other youtubers that show only the simplest steps that we all already know. Respect.
Great video! As others have said one of the best build videos I've seen. I am about to do another build with this case so glad i came across this. It was nice to see everything in such detail and wish I was able to find something like this when i did my first build. i was honestly planning to go with the F120 duo fans but after seeing this i think i am going to go with the Lian Li fans. They look absolutely amazing. Was also on the fence on the Strimer cables but have decidied to go with them as well. Thanks again for the great video!
literally bookmarked this vid bcz of how goated it is. i just bought almost the same components and you honestly relieved my stress and carried my build. ur so goated and deserve the best in the future. 10/10 video cant wait for more content!
Thanks 🔥I really appreciate this comment. Making me want to make more PC builds lol
I loved the vid man! I bought the same case about to start my first build. Looks awesome and very helpful sir
Thanks for the feedback 🔥 Hope you enjoy the process !
You're a lifesaver, I was just about to pay someone $100 to build my PC, but now I feel confident in building myself. Appreciate ya fr. Also what software are you using to control all the rgb?
I'm glad you found the video helpful ! It's hard at first, but def worth it ! I use Lian Li's L-Connect 3 software to control the fans, and ASUS Armoury Crate for the rest of the lights
THANKS for the textbook building guide. very informative
You're welcome 🔥🔥
that black red and white sheme is dope...
Absolutely amazing video, solved things I've been struggling to find answers about for WEEKS. Lifesaver, thank you
You’re welcome ! I appreciate the feedback 🔥
Which answer were you looking for ?
Routing issues for the lian li fans with the h9 and clearing up the reverse vs normal infinity fans alongside showing a good airflow layout. I was planning on building a very similar build so this came in super clutch right now@@FIREWOLFTECH
@@moneyinso Awesome 🔥🔥 I'm glad this video helped out !
Thank you for showing us the build in so much detail! I'm way less intimidated to attempt a build after watching all 1:22:36 of your video.
I appreciate you viewing the whole video and I'm glad it was helpful and wishing you the best in your build 🔥
Absolutely Fire🔥
FUEGO 🔥😏
thank you for amazing video! well done ❤
You're welcome and I appreciate the feedback
The black and white rgb looks great especially with the white moving on the side of the fans.
Bro, I love your video. I bought this case yesterday and I was going to build it today and I thought of checking videos, your video is the best bro and I'm sure it's going to be helpful today.
Thanks man!
Thanks bro 🔥 I really appreciate that and I’m glad this video is helpful
left ear thoroughly enjoyed the entire 1:20 hour video. the fan colour gradient looks great
it was a rookie mistake/accident 🥲 crazy what one button does, and since I don't use headphones, I never realized it until you guys pointed it out
So far the best video i have watched.Clear walk through to where everything goes! Im hoping to build something like this in a few months! Pretty nervous. We got to learn at some point
Thanks ! I really appreciate your comment, I'm glad you found this tutorial helpful :) I can understand the feeling since I went through it with my first build, but I promise it'll be a great experience 🔥
With the help of your video and my motherboard manual i have managed to build my very first pc, booted well and currently installing windows! Thank you for showing us
@@r_slxyz398 AWESOME 🔥Thanks for sharing :)
Clean af. You inspired me to do a build like this
Appreciate the comment 🔥 Hope you end up doing it !
amazing video bro, Freaking loved the video
Thanks bro 🔥 appreciate the feedback
holy smokes this is literally the best pc i have even seen
I appreciate the feedback 🔥 the H9 Elite is gorgeous 🤩
for the software, do you need to use separate ones for the fans and the cooler?
The bend I need to make with my usb 3.2 gen 2x2 type-C cable is quite tight. The cable seems almost doubled over. Is that normal? So far very nice explained, keep up the good work!
Sir since you are using one lianli controller to control all fans power and rgb so one connection from psu(sata) is enough to run these fans with power and light? Nzxt claim its controller can handle 9 fans through splitter so same goes for nzxt one controller and one psu (sata connection ) for power?
the best looking pc build ive ever seen🤩💯
Thanks 🔥 I appreciate that
I question, can I connect the lian li strimer cables do nzxt elite atx controler? are the same?
Definitely a nice build , interested in the vertical mount . Do you have to adjust or tweak it to make sure the gpu is level ? Doesn't look level to me , maybe it just me . Again dope build , doing a blk build with the same case just the flow and the Rog Strix 4070ti super with a Rog strix z790-e motherboard.
It probably isn’t lol, I didn’t mind since the 4070 isn’t as heavy as my 4090 white build where I def needed the GPU anti sag stick.
And that’s an awesome combo 🔥 good luck with the build
Hey would it be difficult to mount the fans later? I bought everything from your list. I received everything except the lin li fans and I wanna build it already
I meed a screw driver for building my pc what one r u using in video
I have 7800 xt nitro plus it has a header called as ARGB out... and i have one cooler master hyper 212 cpu coller which has argb wire free, can i connect this wire to my gpu argb out will it be in sync? or is there somthing iam missing, i guess saphire has also given me one more argb wire with the gpu
The white background of the video, are those blinds/shades? That design is wild, what are those? Link?
so i can use NZXT hub for lian lee fans without having a problem controlling the fans throw the lian lee app?
oh man i love this guy! im trying to build my first pc almost exactly like your! for CPU i will use intel i7 core 14700K, asus rog strix 4070 Ti Super :)
How did you get the Strimmer cable to connect to the GPU ? I have the same GPU and same cable but the black part of the strimmer cable near the pins gets in the way and doesn’t let me connect it to GPU. I really would appreciate your help with this, please.
Do you think my 850 psu is enough for all of that I legit have the same exact thing but my strimmers on my gpu only half light up
The h9 flow dosnt cone with that acrylic pice for the fans what do I use this is my first time building
So your saying if I powered it with a 850W I would need to run 2 cables from power to gpu ?
very good content
Thanks 🔥
Why is the radiator hose above pump level ?
That last plug in the controller box for lian li does that go to a ARGB and the other small cable to the fan header?
Yes, but that’s only if you want the motherboard to control the fans
how did you sink all the rgb?
Whats your anti sag prior the vertical mounted option? the small pen type anti sag for gpu? what was it? definitely need that! thanks
I should've put it on this video since it did sag a little bit. If you get a ROG STRIX card, it comes with it in the box, other wise you can look up : anti-sag bracket and you'll see the pillar/pen style. If you look at my other H9 Elite video : ua-cam.com/video/h3jfhlMUxoo/v-deo.html I have one there
looking to buy a prebuilt pc with this case but was wondering with the Elite, where does the top fans even push the air out? or its just for looks you did it this way? thanks!
Yes it pushes out air. There’s a side top vent plus the whole back and back side of the case is all ventilated
It’s crazy cause right around when this video dropped I started buying my parts. I’m about to build almost this pc and I’m so hyped I can see it happen before I do it 😂
It was meant to be 🔥 lol
I really appreciate the feedback
@@FIREWOLFTECH haha seriously. It was perfect timing. And thank you again for the video. I can’t explain how much it helped bro. All the way down to where the tubes were going to get in the way with screwing in the cpu cooler lol. Thank you 🙏
@@wowMush You're welcome my man and I appreciate you watching my video 🔥🔥
@@FIREWOLFTECH absolutely brother!! Subbed for life!!!
subbed!
🔥🔥 Thanks so much I appreciate it !
Love your videos!!!❤️ I am planning to build pc like your white one. However I would rather wait 1 year and spend $2000 on rtx 5090 than spending it now on rtx 4090.
Much love!❤️
I appreciate the support 🔥
Hopefully when the 5090 comes out, it’ll be under $2000 😅 this guide would be the same for the white as well
@@FIREWOLFTECHhello sir i was wondering if i decide to make a build in h9 elite,
The fans that come by default with this case will look good with 3 extra lian li fans at bottom+ nzxt krkaen aio
So you have your top fans and aio side fans as exhaust but only three intake on bottom?
The top 3 fans and 1 rear fan is exhaust, while the side and bottom fans are intake. Sorry for the late reply
Hi brother, where did you find the GIF of the NZXT water-cooled LCD Charizard? I also want to find it for Charizard X
You could look up Charizard Sprites. There’s several websites that have the GIFs depending on which generation
I love the build but I have a question if possible would you be able to make a video on how to set everything in bios, like downloading windows, and updating your motherboard, what the ram should be at? I like how you made it easy to build a pc but I struggle a lot in bios and never know where to start and how to active window after I get the windows key, and the water mark? If possible but I love the build can’t wait to see more builds in the future, keep up the work man. I loved it also thank you for showing step by step it helped out a lot
I would’ve done a video like that if I hadn’t re used a motherboard and SSD that already had windows downloaded 🥺 when I get the chance to make another PC build from absolute zero, I would make a guide on that because I’ve had my long list of nightmares going through those steps 😅
But as for the steps before you turn on your PC build or even attempt to build :
1. Have Windows loaded on a USB Drive (you can get this through Microsoft)
2. Download WiFi and/or LAN drivers from your motherboards support website on a separate USB Drive (I’ve ran into an issue once when the motherboard couldn’t even connect to Ethernet or WiFi)
2A. Optional* but on the same USB Drive for the drivers, you could also have the latest BIOS update on the USB Drive so you can update it before trying to load windows
3. Put the windows USB Drive on the motherboard, and when you turn on the PC for the first time, it’ll go through BIOS (assuming no issues with your PC’s components)
3A If bios says it can’t read/detect CPU fan, just set it to ignore because you have AIO pump instead
4. Assuming no issues and it goes to your bios, there should be a section for bootable drives, and you should see the USB Drive showed as a bootable drive, and when you exit the bios, Windows setup should begin.
5. Follow all steps. You could always ignore the activation just so that you can get it running (I personally just buy the activation from Microsoft so that it’s easier and always saved on my account)
5A if during the windows activation when it ask for internet and your mobo can’t detect WiFi or LAN, connect the other usb drive to install those drivers
These are the steps I can come up off the top of my head, and there’s also many guides here on UA-cam as well :) I hope that helps
Would you think there's any huge gains doing a push / pull intake for the Aio on the Side intake?
or just leave it as you're doing with the fans on the other side while pulling from the side?
I think the difference in gains is not much to justify running 3 extra fans
@@FIREWOLFTECH
Thank you for your input on it as i am currently i have top mounted aio with side intake and bottom intake on my o11 evo
but i was thinking of putting the aio on the side intake like yours is
having it top mounted as it is yes warm air being pushed through it inside the case hehe
Okay, question. So I'm doing a VERY similar pc build this week and using Lian Li fans and the same case. Trying to finalize the fan orientations/air flow. Am I correct in seeing that there are 6 intake fans (bottom and radiator fans) with the other 4 being exhaust fans? Is there a reason for this? My understanding was that you should have negative air pressure inside the case (more air going out than coming in) to increase overall new air flow through the PC and decrease warm air just circulating around with no place to go. I haven't built a PC in about 10 years so I must admit it feels like I'm starting from scratch again so any suggestions would be appreciated. I was thinking about having the bottom be intake and then the top, side, and rear fans be exhaust. Ideally, I'd like to have 4 intake/6 exhaust, but with the way this case is set up, it'd be 3 intake/7 exhaust which seems TOO negative. Would I be able to adjust the fan speed and lower the intake fan speeds with the video's fan orientation to create neutral or negative air pressure? I'm probably overthinking this, but I just don't know lol. Thanks!
I’m no expert when it comes to the air pressure, but the majority of builds use the same concept, the reasoning is you want cold air from bottom and side coming in, and blowing the hot air from the top and rear. This cools all your components from bottom up. Another reason too is that it also prevents dust build up in the PC. And finally, YES you can adjust the airflow on each set of fans independently to create that positive, negative, or neutral airflow.
I leave them all running the same, but I don’t honestly know if that is the most optimal, I’ll have to look into it
Do the mixture of nzxt inbuilt fans and lianli infinity fans look good in h9 elite
I prefer having all fans the same, but if you had to mix them, I’m pretty sure it’ll still look good
Quanto sai um pc desse hoje?
just to confirm, you have reverse blades on the back, and on the aio? This will be my first vert mount build (and first build in general in like 8 years) and I want to get it right! And all lian li for aesthetics and better software? trying to decide if i need to order more fans or use the kraken elite fans and nzxt. Also cannot find the strimmer cables anywhere :')
The Reverse Blades would be 3 x Bottom and 3 x Side (AIO)
I've never tried the fan control software from NZXT, but since I use the Kraken, the software is easy to use.
You could use both lian li and NZXT fans, but the cable management would be more chaotic on the back since you'll need multiple controls instead of just one for the Lian Li.
As for the Strimmer, I'll link another one that is in stock, this one is the Strimmer i have on my White build : amzn.to/3TGZARb (Amazon Affiliate Link)
The main difference between this one and the one on the video is that it has more RGB Lights (12 Light Guides) vs 8. I honestly didn't even know until I looked at my white build and noticed the Strimmer being skinnier. In my opinion, the one with 8 Light Guides looks better and easier to maneuver. Look at my White Build video
About to start my first build with this case. I sat here and shopped for hours and only reason I went with all nzxt fans is because of availability. I wasn’t willing to wait until a week or 2! Plus the nzxt controller in this build seems like a plus if that’s the route I’m going./?
Yeah it’ll be easier because the controller is already there, so it’s plug and play at the point 🔥
Do you know the fps in games?
Would you happen to have a video of the white build? The PC in the beginning of the video next to all boxed components?
The only video I've made on my white build is this one : ua-cam.com/video/h3jfhlMUxoo/v-deo.html
Where I updated the AIO to the side and added Reverse Blade fans. I'm planning on doing an all white build tutorial next, maybe either the 011 Vision or H6 Flow case
@@FIREWOLFTECH the reason I’m asking is because I’m going to attempt my first build in a H9 Flow this week and I was hoping you had a tutorial I could refer to if I get stuck, I was hoping that was the white case 😂 hopefully this information helps you with your next build! Haha
that's beautiful
it is 🤩
The front fans which comes pre installed are they already installed as intake fans or do we have to flip them?
the pre installed fans are intake (which is the back side of the fan)
Where did you put reverse and standard blade fans? Reverse fans to aio and bottom and standard to top and exaust?right? And maybe you can left nzxt own fans as addition from other side? 6 fans on aio will be better?
Reverse on side and bottom, Standard on top and rear.
Having a push/pull config isn't worth it to me, I've seen many claims that its only a 1-2 degree difference.
Not gonna lie, the NZXT H9 Flow case makes for some really beautiful builds. But I do love my Hyte Y60 case!
They really do make beautiful builds 🔥 I like the Y60, but wish they would show bottom fans
If we decide to mount our gpu horizontally the traditional way ,is it safe to keep bottom fans below the gpu, wont they opposite each other at high rpms while gaming?
of course its safe, you get more airflow going into your GPU which is a plus
This video saved me 250. I built almost the same PC. Just different fans and GPU.
🔥🔥 which fans and gpu you went with ?
@@FIREWOLFTECH I went with the NZXT duo fans. Micro center was charging 250 to build it. I was like no way. Your video helped a ton.
So you can still install the Radiator on top and add 3 lian li fans for push and pull to see the fans on top
I'm not sure if there's going to be an issue with cable clearance, but if it fits, why not 🔥
There is a solid glass panel over the top fans ?
Yes I would say 80% is glass and 20% are vents
if motherboard does not have any rgb or argb header will this setup work? H9 elite with inbuilt nzxt rgb duo fans + 3 lian li infinity fans (triple pack) both will have there own controllers
As long as the controllers are connected to the motherboard via USB, you should be able to control the fans with the software. I didn’t connect any argb header at all.
Sir i was wondering can i connect my cooler master hyper 212 cpu cooler to one of my nzxt controller in h9 elite just for power up i know nzxt uses different rgb pins but fans power will be same
I've never used a CPU air cooler, but if the fans you're using is the same NZXT fans then it should work
Could you by chance put a list of the specs?
Hello sir i can clearly see mirror on all the fans … for this is it necessary to have reversible fans and where did you installed those 6 reversible fans
You don’t need reverse blade fans, I have it so I can see all mirrors.
The 6 reverse are located on bottom and on the AIO
@@FIREWOLFTECH to get the same look then i must go with reverse blade fans at side and bottom?
@@FIREWOLFTECHi was doing more research and i found out that reverse blade set is not available, you have to buy it individually and you will get controller with the pack only that of normal fans blade
top and rear is exhaust and bottom and side is intake?
Correct.
Also, bottom and side are reverse blade infinity
while the top and rear are normal
Saw you unbox some phones but was wondering what phone do you use?
I use the 15 Pro 🔥
23:50 I think u forgot the IO shield?
this is like the exact same build i want to do so thank you so much for this
You’re welcome ! I appreciate the feedback and good luck on your build 🔥
Bro I’m almost building this exact pc tomorrow night lol. Same gpu and case at least 😂. Oh and the cpu cooler. Slightly different specs. Dope video !!!
I lied though. I have the ti super… but yeah. Dope build brother! I can’t wait to build mine tomorrow night. Crazy it’s so similar haha.
Awesome 🔥 Hopefully you have it built already ! H9 elite is beautiful 🤩
Yeah man let me know how it went !
@@FIREWOLFTECH it went great !!! I will try and post a video on my yt. I just started posting gaming clips again! Nothing special. But it looks so nice man. Thank you for this video. It helped me a lot with the case. Very informative. I watched the whole thing twice haha.
@@FIREWOLFTECH after looking back at it I need those fans… they are so nasty. And my fans sit along the black line around the edge. How does yours sit above that black part ?
How much did the parts cost??
How do I have all my fans on the same size while still maintaining the intake and outtake?
The side and bottom fan blades are REVERSE blade, while the top and back fan blades are facing normal
can we install E-ATX motherboard in this like aorus master , will the cable mgmnt look good? This case only supports upto ATX motherboards and the difference is 2cms in wide
Im not sure if it’ll fit, my guess is no since it only supports up to ATX
@@FIREWOLFTECH There is a channel Designs by IFR he was able to fit E-ATX in h9 elite ua-cam.com/video/iysa6m3jQJI/v-deo.htmlfeature=shared
I have no idea how airflow works but u got 6 reverse blade and one standard for the back but is the 3 pack with the remote reverse blade or are all three of them standard and does this have anything to do with airflow
The bottom 3 fans and 3 side fans (reverse blade) bring in cooler air from the outside while the Top 3 and 1 Rear fan (standard) blow hot air out. This configuration works the best and also minimizes dust.
Because every standard PC fan has the blades set to exhaust (blow out), you have to flip it around so that the blades intake (blow in) air. This means that you’ll end up seeing the back of the PC fan which doesn’t look as good as the front. Reverse blade fans solve this by making the front of the fan have blades that intake air so you can keep the same design all around the case.
Thank you. You always respond and I understand what you say w vid💜
@FIREWOLFTECH also why did u buy 6 singular reverse blade instead of 2 3 packs of the reverse blade
how much did the build cost in total
I have a question about the motherboard. On pc part picker it says that the case wont be able to use the usb-c port because of the motherboard. Is this true?
Not true, I use the USB-C on the case frequently and works fine.
Not sure why it says it’s not
Where is all the parts links?
Can you make this build with h9 flow ?
I def would if NZXT sent me one 😅
So do I buy the kraken cooler then replace the fans or can I just buy the radiator?
You could just buy the radiator if you can, since you’ll be replacing the fans that come in the kraken elite
@@FIREWOLFTECH I need help, I'm in doubt between the H9 Flow and the Lian Li Evo11 which would be better in your opinion, please elaborate
I have been using nzxt cam for more than a week since i have nzxt fans
I have noticed the software show incorrect temp and sometimes it forgets to show rpm for its own fan
Wondering if L connect will be much better than nzxt cam
If yes then will go with lianli fans for my bottom location
I haven't personally used NZXT fans do can't really say. I just know that the lian li software works great on my setup
is there another cheaper graphics card that could go in this build?
You could always go for a less expensive CPU and GPU. The ROG STRIX cost more for its aesthetics and cooling performance, but if you wanted a cheaper version of a 4070 Super, you go always go for basic GPUs like the MSI Ventus 4070 or ASUS TUF 4070. There's many lower cost 4070s out there, but you could also go down to a 4060ti
The white build is gorgeous do you have vid somewhere i can't find it xd
I never made a tutorial on that one 🥲 this black one was actually my first tutorial build since I was more confident being my 3rd build
@@FIREWOLFTECH Thank's for the reply ! May i ask your GPU temps with the vertical setup ? I'm going to buy like legit the same build in 2-3Weeks, NZXT H9 Flow, Strix 4090,7800X3D NZXT AIO,11 Lian li Fans
The reason why your pc didn't boot when you overclocked the ram is because the motherboard and cpu needs to train the memory like it does for when you first boot up a system for the first time. Excluding pre-builts of course because thats already done throughout the testing phase of the system.
lian li's software has a passthrough function for the motherboard rgb. you can still plug in the 3 pin; but use the motherboard unless you want to. it lets you switch between them.
What software do you use to sync all the lights on a build like this ?
@@holdenaguillard7565 Depends what hardware you use. Typically the motherboard RGB software can sync with most things, if not a universal controller like thermaltake's controller can be used to sync RGB. Otherwise you can use 3rd party software like Signal RGB to sync things up... its messy, it's based on tons of hardware variables... the simplest solution is to either use all the same brand, or just skip the RGB altogether...
@@boss350z5 do you know if Lian li fans are compatible with aura sync ?
Do the nzxt cam uses gpu for lcd display in aio?
Nope, and that’s the beauty of the LCD not needing an input from your GPU. It syncs through your motherboard
Would this build work with a h9 flow instead of the elite?
Yes ! you can follow the same steps
Hi, does it make any difference if I have the h9 flow?
The only difference I beleive is the top panel is not glass, and is a ventilated mesh design
@@FIREWOLFTECH Thanks for the answer.
@@FIREWOLFTECH So I build my Pc now and it runs everything is on but my watercooler doesnt have rgb and from my arctic p12 coolers only 1 of 3 ist with rgb. Also my Pc doesnt Connect with the monitor it says no signal on hdmi and i connected it on the gpu do you know the reasons for this?
Hola bro, Hablas español también? Tenía una duda respecto a una Review que hiciste hace unos meses y es respecto al monitor LG de 27 pulgas oled, crees que es una buena compra? Saludos y excelente canal!!
El nuevo LG de 27 OLED que recién subí es mejor : ua-cam.com/video/rJB0Or1MLiw/v-deo.htmlsi=vmAxCckkmLd3B7Vh
Es nuevo y cuesta 100 dólares menos
@@FIREWOLFTECHJusto ordene el monitor una hora despues del comentario 😅 Crees que hay mucha diferencia entre el modelo anterior y este nuevo? Espero que no ya que me costo mucho decidirme jaja
Sinceramente el nuevo es mejor, te recomiendo cambiándolo cuando tienes la oportunidad
@@FIREWOLFTECH gracias!! :)
Hello firewolf today I finally received my h9 elite case but while unboxing i found there was cardboard inserted between the tempered glass and i can see little gap which os enough for dust to get in .. i am not sure if this is manufacturing defect… and there only brown outer box mentioning h9 elite not the colour box was there
Yeah that’s normal, there’s a small gap, I mentioned it in the video. As for the color box, the white one I ordered came in a colored box, but the black one came in the same brown you have. Boxes can sometimes change.
Don’t worry there’s no manufacture defects
@@FIREWOLFTECH sir one more thing i have msi mpg a1000g psu i am currntly using one sata cable from psu which has 4 sub nodes (connectors) and i have used 1 for nzxt controller from which my preinstalled fans are running and the other for hdd connection still 2 nodes are left .. is it safe ? Or should i use another individual sata connection from psu for when going for more fans… As nzxt says one controller can handle 9 fans
@@FIREWOLFTECH and sir i was unable to install anti sag bracket under my gpu in this h9 elite case.. i have 7800xr nitro plus and the sag holder which came with the gpu but the screws that came with the gpu were not working and also tried the h9 elite gpu slot screws .. i may have to check other screws that came with h9 elite … any anti sag bracket should work universally in any case
I accidentally installed 4 psu screws in the motherboard and i was surprised how they got fit , i have to re do it again😢
Don’t worry about that ! A lot of these screws can be used for multiple different areas.
I always end up with a few screws towards the end wondering where it was supposed to go lol
As long as the screw went it smoothly, you’ll be fine
Wait where u get the controller for the strimmer cables?
the motherboard strimmer should have the controller
@@FIREWOLFTECH ahhh makes sense, my nearest micro center didint have that one and only the gpu one lol, fucked up my build so thats gonna have to wait, thank you for the info
@@DiegoRodriguez-ru5if you can always add the strimmers later if you want to get things up and running. Hope the build ends up great !
@@FIREWOLFTECHthanks so much, im sorry for bothering and going off topic but what case would you recommend if i need space? So i was trying to do your build but with a suprim liquid 4090 and its not a good fit lmao it all went well till the gpu lol
what do you use to control the rgb on ram and gpu?
I use Armoury Crate which is for ASUS motherboard. Since the GPU is also ASUS, the lighting would be synced in that as well.
If its a different brand, for example an MSI Suprim card, you would use their software to control the GPU lighting
@@FIREWOLFTECH thank u so much! i bought my gpu from ur affiliate link, this video was so helpful !
Aww thanks so much 🔥🔥
If you also have ASUS motherboard that software will control RAM lighting, motherboard lighting, and ROG STRIX GPU lighting.
I’m glad I was able to help !
i cant find the triple pack with the reverse blades
They only sell single pack reverse blades
Hello sir i was doing some research over the placement of aio in the cabinet and they said top placement is recommened and side placement with tubes up has the worst thermals 😢.. even i want to place all the components the way you did
AIO on top is the best, AIO on side with tubes down is better, and AIO on side with tubes up is ok.
Having it the way I have it is perfectly fine, and the only upside of having it in the side is that the radiator will get cooler air versus hot air when on top
To add on, if this was the H9 Flow or any other case, I would put AIO on top. But since I have the H9 Elite with top glass, why would I make it look horrible with the radiator on top, for that it defeats the purpose in my opinion.
The way I look at it, the H9 elite has way better airflow then the 011 Vision where you can’t mount anything on top
@@FIREWOLFTECH the top glass makes h9 elite premium and we still can use it… sir my motherboard does not have any rgb headers
Can i still run all h9 elite fans with rgb using the cabinet controller and fan splitter comes with h9 elite caninet
Don’t try to install your water cooler upside down, because it will overheat you CPU, (it’s difficult for water to flow from down to up)
Only let the tubes be up not down
Hello! Can someone help me please??
I just build my first pc but I’m stuck to finish it since I have the rog strix z790-a gaming wifi ii motherboard and I have the kraken elite 360, infinity fans sl normal and reverse and the striker v2 cables but I can’t find where to plug them since I only have two usb ports and I’m now scared of not being able to put everything together 🥲
You’re going to need a USB hub like the NZXT HUB, or a USB Splitter. That’s why in the video I used a hub since the motherboard only has 2 🥺
@@FIREWOLFTECH I just dmed you!!