Hi. I plan to buy 823a with patrol and patrol presets. Is it possible with HA set patrol locations, and if dorbell is detected, move ptz reolink to location 1 (patrol 1 preset), wait xx mins/delay time and return to default position, garrage move sensor detected, move to locarion 2 (patrol 2?) .. etc
Hey mate. Been trying to get my reolink cameras connected to HA for a while. When I paste the github link and click add nothing appears? any ideas? Cameras work fine on the app.
The "new" official Reolink integration does not provide a service call like shown in the video. Any hints on what the new service call looks like. Thanks.
I have ordered the E1 Outdoor after watching this video ... But it seems port 8000 isn't even open on the camera ... Thus the installation fails ... Have they updated the firmware on their cameras maybe?
Yeah, you could make an automation run through the presets every few minutes. If the camera isn't meant for it, you may wear it out mechanically though.
Might be nice if it really worked like this. I just don’t think there stuff works with HA at. Have work on this camera first three days, a real wast of time and money.
The product specs say IP64, so you look up IP64 and it says that it means it can resist water splashing on the enclosure from any direction without penetration. m.reolink.com/us/product/e1-outdoor/?gclid=Cj0KCQiA3rKQBhCNARIsACUEW_b3xnYjyTjtLC-xM82D9CsGC0Y4Pav9FKaN48TfYnP7uafY87xgKNAaAvklEALw_wcB#compare
@@makeitworktech when trying to add the camera. I’ve entered the IP and username and password, then shows that error. I’m trying the E1 pro. On the github it states it’s not supported. Do we have different cams?
Great video! Enjoyed it very much!
Thanks!!
Do you know if we can use the two-way-audio as a wakeword voice assist?
Can you do one for hikvision
Hi. I plan to buy 823a with patrol and patrol presets. Is it possible with HA set patrol locations, and if dorbell is detected, move ptz reolink to location 1 (patrol 1 preset), wait xx mins/delay time and return to default position, garrage move sensor detected, move to locarion 2 (patrol 2?) .. etc
Hey mate. Been trying to get my reolink cameras connected to HA for a while. When I paste the github link and click add nothing appears? any ideas? Cameras work fine on the app.
The "new" official Reolink integration does not provide a service call like shown in the video. Any hints on what the new service call looks like. Thanks.
Did you managed to fix for this?
I have ordered the E1 Outdoor after watching this video ... But it seems port 8000 isn't even open on the camera ... Thus the installation fails ... Have they updated the firmware on their cameras maybe?
May have. Use the Reolink desktop app to open the ports (see my Reolink Duo2 review). Hope that helps!
Hi there, quick question, can you make this camera do patrol ? i know you can save preset positions, but can you make it go trough them in an order ?
Yeah, you could make an automation run through the presets every few minutes. If the camera isn't meant for it, you may wear it out mechanically though.
is this that you need both: reolink_dev AND ovif? when I add ovif only I don't have many controls but when I add them both then yes
Yeah, I needed both for all of the controls
Will it connect over the internet to monitor from work, or will it have to be within the home wifi distance?
Via the Reolink app you can view remotely, or via Home Assistant if you have remote access set up
Hi i didn't find how to turn on spotlight with the curl, can you post it? thanks
Hey, if you hop onto my discord I can post it there. It will be formatted better.
discord.gg/cb7jNh37p2
Might be nice if it really worked like this. I just don’t think there stuff works with HA at. Have work on this camera first three days, a real wast of time and money.
Their stuff works great for me!
Is this fully water proof from heavy rains? And the sun smashing it with direct sunlight?
No
@@makeitworktech wtf really? How did u find your information? Can you link me
The product specs say IP64, so you look up IP64 and it says that it means it can resist water splashing on the enclosure from any direction without penetration.
m.reolink.com/us/product/e1-outdoor/?gclid=Cj0KCQiA3rKQBhCNARIsACUEW_b3xnYjyTjtLC-xM82D9CsGC0Y4Pav9FKaN48TfYnP7uafY87xgKNAaAvklEALw_wcB#compare
onvif ptz is working with other onvif right?
I'm not sure!
I keep getting an unexpected error when trying. Any ideas?
Trying what, specifically?
@@makeitworktech when trying to add the camera. I’ve entered the IP and username and password, then shows that error. I’m trying the E1 pro. On the github it states it’s not supported. Do we have different cams?
Mine is the E1 Outdoor, not sure how different they are
@@makeitworktech probably the reason mine won’t work. I’ve tried it before on my cams with no luck. Great video anyway! I might have to get one.
Thanks! Yeah it's a fun camera. Working well in the cold NE USA