Philips Avent Bottles - Proper Assembly

Поділитися
Вставка
  • Опубліковано 25 сер 2019
  • This video is about Philips Avent Bottles. This video will go over the Proper Assembly for the bottle!
    We have a newborn that currently loves and swears by these bottles. We have heard a lot of people complain about these bottles specifically but I am not sure they are using them properly so here is a quick video to help ensure the bottle is assembled correctly ❤️
    Please feel free to leave any questions or comments ❤️

КОМЕНТАРІ • 51

  • @NO1Portland
    @NO1Portland 4 роки тому +7

    Incredibly helpful and informative! Thank you for this video!

  • @Zxjd
    @Zxjd 7 місяців тому +13

    I bought these bottles yesterday. After a few feeds and my first clean up I noticed these notches. Nowhere in the manual does it say to match it and how to use them properly. Thank you for the info

    • @albertustom
      @albertustom Місяць тому

      Same problem thank you 🙌👍🥰

  • @pankaj.pandit
    @pankaj.pandit 4 місяці тому +1

    Precise and accurate

  • @levintt
    @levintt 2 роки тому +2

    Very helpful.

  • @WindKid22
    @WindKid22 4 місяці тому

    Thank for for this helpful information. We thought the bottle was defective and it was frustrating.

  • @Ferdito
    @Ferdito Місяць тому

    Thanks for the info. Very useful! shame I did't watch it for my first baby. I know now for the second.

  • @jammaemco913
    @jammaemco913 2 роки тому +2

    Thank you

  • @agj5618
    @agj5618 3 роки тому +1

    Glad I found this.. thanks for making a simple video! I had the nipple lined up, bit didn't realize I was over-tightening it! Thank you!

    • @whittlzwhittrz
      @whittlzwhittrz  3 роки тому

      You are so welcome! Once it's all lined up it will be a game changer! Takes a little more time for assembly but this was our daughter's favorite bottle so far!

    • @agj5618
      @agj5618 3 роки тому +1

      We switched from playtex ventaire to this.. as I can't find the ventaire anywhere now?!?! Think they are phasing them out? So I got these and the nipple keeps getting sucked into the bottle.. I was getting so frustrated?! These are expensive bottles too..

    • @whittlzwhittrz
      @whittlzwhittrz  3 роки тому

      @@agj5618 yes the nipple sucking in is the only way the bottle can tell you its too tight! I hope you love them as much as we do! We plan to use them for our baby due this month!! 😊

    • @sagart
      @sagart 3 роки тому +1

      Thanks for the video. I followed the instructions. However, the milk is getting stuck periodically and baby is becoming fussy. We are using formula. For now I'm removing the lid and putting it back to fix temporarily. Can you please let me know what mistake am I doing

    • @whittlzwhittrz
      @whittlzwhittrz  3 роки тому

      @@sagart can you please explain where the formula is getting stuck? In the nipple or not coming out of the nipple? I would start from scratch. Make sure the nipple vents are matching. Make sure the lid isn't too tight and make sure when feeding the nipple vent is up at baby's nose.

  • @ninas4968
    @ninas4968 2 роки тому +1

    🙏🏻👏🏼

  • @gilkaurisrojas7106
    @gilkaurisrojas7106 4 місяці тому +1

    Thanks you

  • @anyssaevelynnelson7971
    @anyssaevelynnelson7971 Рік тому

    Thanks

  • @asimkshaikh
    @asimkshaikh 2 роки тому +1

    Thanks for making this video. I have a basic question, If you touch the teat to assemble it into the ring, does it still remain sterilized? Can we sterilize without removing the teat from the ring?

    • @whittlzwhittrz
      @whittlzwhittrz  2 роки тому +1

      www.usa.philips.com/c-f/XC000003274/how-do-i-clean-and-sterilize-philips-avent-bottles-and-teats
      It does appear that the teat needs to be seperate from the ring during the sterilization process. Once assembling, I would make sure my hands were clean and washed with antibacterial soap prior to assembling.

    • @asimkshaikh
      @asimkshaikh 2 роки тому +1

      Thank you@@whittlzwhittrz for your quick reply :) I appreciate your help.

    • @chuckgrumble5440
      @chuckgrumble5440 9 місяців тому +1

      As soon as it hits air its not sterilized, so really its just really clean. You need to have an autoclave and air tight packaging for a true sterile bottle. I wouldn't worry about touching it with washed hands, and babies need antibodies too.

  • @clarissasusilo4292
    @clarissasusilo4292 3 роки тому +1

    Hi..sorry to bother you, i want to ask you..can i use the no.2 teat with the small bottles (125ml) ?

    • @whittlzwhittrz
      @whittlzwhittrz  3 роки тому +2

      Yes make sure the vent on the nipple is the same. They have released a newer nipple that vents in 3 spots so be sure you buy the correct one or you will spill formula everywhere on baby 😊

  • @tajalwaseem2647
    @tajalwaseem2647 Рік тому +1

    When my baby takes the avent bottle half of the milk comes out of his mouth. It's so irritating. I even fixed the teat properly according to the instructions. Please help me with this

    • @whittlzwhittrz
      @whittlzwhittrz  Рік тому

      It sounds like maybe your baby isn't latching properly. I would seek a consult with a lactation specialist or a doctor to check for tongue tie. Bottles and nipples should be selected to be the closest to the shape of the mothers breasts so it might need to be a different brand, bottle and / or nipple. Sending such big hugs.

  • @breannamcfarland1080
    @breannamcfarland1080 2 роки тому

    Any tips for the Avent Natural bottles when milk won't flow? I already tried cleaning out the nipple hole and the vent.

    • @whittlzwhittrz
      @whittlzwhittrz  2 роки тому +1

      Check and make sure the formula isn't clogging the nipple hole when baby goes to drink. When I mix my son's bottles, the formula does bulk up at the nipple so I have to shake the bottle a little harder until the formula clears! ☺️

    • @breannamcfarland1080
      @breannamcfarland1080 2 роки тому

      @@whittlzwhittrz I'll give that a shot. We're doing ready to feed bottles.

    • @whittlzwhittrz
      @whittlzwhittrz  2 роки тому +1

      @@breannamcfarland1080 we used those in hospital for my son when he was born. He loved them. We re used the nipples as much as we could. If I remember correctly, the ready to feeds need to be shaken well before given to baby to make sure the formula didn't solitify. Then twist the nipple to the open top of the ready to feed. It shouldn't allow very much to pass through but you can test its working by squeezing the nipple while holding the bottle down.

    • @breannamcfarland1080
      @breannamcfarland1080 2 роки тому

      @@whittlzwhittrz turns out you can order the RTF nipples straight from the Enfamil website, which we did until he started having trouble taking them. Then we switched to the Philips Avent. I've been decanting the RTF bottles over into the PA bottles, just to clarify

  • @hongvu6342
    @hongvu6342 3 роки тому +1

    Omg, thank you so much. I did wrong way all the time.

  • @claurangel5063
    @claurangel5063 19 днів тому

    has it happened to anyone that you wash bottle, get them ready for the next morning either with milk or just simply wash them. You align the nipple with the vent, yet in the morning it is not aligned?

    • @whittlzwhittrz
      @whittlzwhittrz  19 днів тому

      It happens often. When you go to tighten the lid to the bottle the nipple will shift a bit. Just twist the nipple prior to feeding baby so it matches and you should be fine ❤️

  • @kumaridwh3685
    @kumaridwh3685 2 роки тому

    Hi mam i have a problem with nauch ....the nauch sit on same place when I turn cap pls help me

    • @whittlzwhittrz
      @whittlzwhittrz  2 роки тому +1

      An easy way to fix that is to remove the nipple and re align the vent notches on the nipple and cap. Try not to overtighten when putting the cap back on with nipple as it will shift the location of the vent notches and be too tight to be used.

  • @nidhimehrotra-qd8cd
    @nidhimehrotra-qd8cd Рік тому

    Hey, while giving milk be it formula or expressed milk,nipple gets blocked when my baby sucks the bottle nipple and then my baby gets fussy when milk doesn't flow from the bottle.Can you please tell me what is the problem?i have 5 bottles and the problem is same with all the nipples

    • @whittlzwhittrz
      @whittlzwhittrz  Рік тому

      The only time I've had the nipple blocked was when it wasn't getting suction. Align the notch in the ring with the notch in the nipple. When screwing onto the bottle, go slow and don't over tighten. When you feed baby, make sure the notches face upward. All of that should allow for better flow and no blocks.

  • @nivethanivetha4343
    @nivethanivetha4343 Рік тому

    Hlo i have aleaking prblmand when I tighten the lid, the alignment gets disturbef ang it got mismatched? What to do. Pls help

    • @whittlzwhittrz
      @whittlzwhittrz  Рік тому

      Line up the nipple notch with the notch on the lid. When you twist the lid on, don't twist it very tight. When feeding baby, the notches face up near the nose of baby to prevent leaks.

    • @nivethanivetha4343
      @nivethanivetha4343 Рік тому

      @@whittlzwhittrz upside of the lip ryt... How to check whether we overtighten Or not??

    • @nivethanivetha4343
      @nivethanivetha4343 Рік тому

      @@whittlzwhittrz hlo.. It's is mismatched... Can u pls give me ur insta id... It will be helpful

  • @PinkyHoneybear
    @PinkyHoneybear Рік тому +1

    Can u show the flow of the bottle? I put the nipple like you showed and when i put the bottle upside down,no formula drips

    • @whittlzwhittrz
      @whittlzwhittrz  Рік тому +1

      That's great! It means that the bottle and nipple are not leaking! When you give the bottle to your little one when they are a newborn, they need to work on their sucking. They have to sort of work for it just like breastfeeding! When the bottle nipple sizes go up (from 0 to 1, 1 to 2 and so on) it increases the flow. Around size 3 or so that's when you should see some fluids leaking if you were to turn the bottle upside down! ❤️

    • @SawShotShared
      @SawShotShared 3 місяці тому

      Flow is TERRIBLE

  • @camol9
    @camol9 3 роки тому

    hate avent all bottles leaking

    • @whittlzwhittrz
      @whittlzwhittrz  3 роки тому

      They shouldn't leak at all. Check the nipples. Make sure they match the type of bottle you have. Make sure they are not being over tightened. Lastly, make sure all the vent in the nipple and the lid are matched and facing up when you feed baby. No leaking should take place. Best of luck.

  • @dijahhairston
    @dijahhairston 2 роки тому +1

    i hate these fucking bottles. my whole bed smells like milk now.

  • @whittlzwhittrz
    @whittlzwhittrz  3 роки тому +1

    Avent recommends changing the nipple sizes as baby ages. In the middle of this article it has a little picture showing the different ages, nipple number and flows recommended. www.usa.philips.com/c-f/XC000006497/which-philips-avent-nipple-suits-my-baby-best