Thank you so much!!! My husband and I doesnt know about it, its our first time as parents and your video help us so much. We are going to practice in few months XO XO.
Congratulations !! ..Avent natural is very good. Easy to use as only three parts in it. I used glass bottles as it gives a satisfied feel in terms of cleaning.
Your video is a life saver! I’ve been troubleshooting on the teat size thinking that’s the root cause of my baby feeding for hours per feed. Such simple technology to pay attention to as a solution! 🙏
You just saved me from a lot of stress and worry. Was constantly worrying why it seemed as though baby wasn’t getting any milk from the bottle and why it took so long to feed. Apparently, I assembled it wrongly and just following your 2 points made a big difference. Thank you.
Thank you very much, it was driving me crazy trying to figure out when the air vent goes. Nine of the advent natural bottles ( I bought plastic bottle the set) had the notch on it. How do I make sure align it now? With the lips? Thank you
Hi, keep the air vent at the lower lip side. You can check if the vent gets opened while baby Suckles. If not, keep at the upper lip. Basically, the vent shall open as shown in the video.
@@SedivaNL Usually there is a small jet in the beginning because of slightly high pressure inside the bottle due the air compression happening during the tightening of the lid and warm air inside the bottle. After that it is all drops only if you keep the bottle upside down. While The baby Suckles, only he can tell us it is jet or drops. :)
@@SedivaNL if the baby is comfortable with it, let her drink at that speed. It is OK. She will finish much faster once you use higher size teats later.
Avent should pay you for this marvelous instructional video. Thank you for taking the time to show every new mommy and daddy how to properly use the Avent bottle.
i bought these expensive bottles bec everyone on the internet were using it, however the experience was horrible bec the baby was drinking from last 15 minutes but still the bottle was full of milk, i thought my 2 bottles were going to be wasted, however will start trying to use it again, thankyou verymuchhhh
Thank you sooo much for this! Accidentally threw out the instructions and noticed babe seemed to be getting too much air during night feedings, this is a lifesaver!!!
Do bottle leaks automatically when hold upside down, Also my baby is 2 months she is not able to tackle the flow ,milk is drowning from side of his mouth
Check the number written on the teat. The holes in the teat is different based on age of the child. Buy the right one for your child. If the holes are more, child can't handle it.
@@nivethanivetha4343 milk should not be coming outside when you hold the bottle upside down. It should only come out when baby is sucking. It is more natural this way.
i've given up using avent natural bottle cause of leaking problem. Been trying this way before but can't solve. why they dont put the right information on the package how to assembly and whatever.
This is gold. I, like many others, never bothered with reading the instructions. Thank you for this video. I will probably make a video utilizing all these points.
This is not in the manual or website even though Philips claim that they have useful question and answer section. Customer service is not helpful either. They say that such problem is rare. I will try this assembly method thank you
You just saved me from a lot of stress and worry. Was constantly worrying why it seemed as though baby wasn’t getting any milk from the bottle and why it took so long to feed. Apparently, I assembled it wrongly and just following your 2 points made a big difference. Thank you.
Fabulous video. So helpful, was doing it all wrong. Kindly suggest which nipple should be used for 7 month baby, how many holes it should have and what kind of flow.
I use square shaped philips bottle but the nipple suits for dis round shaped bottle I am very dissappointed 😬 anyways atleast I saw dis video and understood thank u so much
The teats are same size for all bottles. It is the number of holes in the teat that is important. The suitable age of child is is written on the teat pack. Please check it and buy accordingly. If you find these bottles big, there are very small bottles available in other brands. You can try those too.
Umm this is so amazing and Phillips need to give you a million dollars for this. We gave up on the the Phillips bottles and switched to MAM then Dr. Brown because nothing was coming out from the Avent nipples. With that said my baby loves the nipple of the Phillips Avent bottle compared to Dr. Brown or MAM but nothing comes out. We decided to up the nipple size, but nothing still comes out so we gave up again. Now I know why nothing was coming out. I'm sure Phillips may have lost so many customers as a result. They need to hook you up!
I don't what i m doing wrong. Milk flow stopped during feeding. If i hve to keep the side where no ie 3 or 4 is written on d baby right side or left or front. Plz help
Milk flow stopped means the air intake into the bottle is stopped. If the air path is clear, you will hear a rrr rrr sound from the bottle while the baby drink it. I think you have tightened the lid too much. if the lid is too tight, the airflow will be hampered as the flexible teat will get compressed... also make sure to press the teat at all four sides before the baby stat feeding. it will clear all the air paths. Just turn the lid to about 30 degrees and it should be fine.
Hi, Attach the nipple with the holder first as indicated in the video. Once it is attached to holder, it will be fixed to the holder fully. The attachment of the holder+nipple with the bottle is just a small turn, about 30 degree. The nipple will not lose alignment. I hope you are using "avent natural" type bottle and associated nipple.
After assembling nipple, while attaching to bottle, even with the slightest turn, nipple alignment is getting disturbed. Also, it starts leaking during the feed. It is a brand new Philips avent natural bottle purchased for our 12 days old new born baby. Request advice.....
I guess the nipple is not assembled properly with the holder. Please check if the nipple rotate freely on the holder. It should not rotate If assembled properly with the holder.
Hi, the teat may wear out out due to prolonged use, abrasion while washing etc. You can buy teat alone from stores. No need to buy the whole bottle. Remember to buy the right size. The size number is etched on the teat.
Thank you for the video. This is SO FRUSTRATING that the bottle requires such delicate and specific use and there are no instructions included in the box! Tired parents don't have time to watch UA-cam videos on this. It should come pre-assembled in the correct orientation and there should be instructions on how to use it. Instead all the insert tells you is to wash the bottles before use (duh).
The bottle can be used as long as you want. The teats shall be changed if it gets worn. Also you need to change the teat when the child grow older, you shall buy teat with more holes depending on age.
Thank you so much!!!
My husband and I doesnt know about it, its our first time as parents and your video help us so much. We are going to practice in few months XO XO.
Congratulations !! ..Avent natural is very good. Easy to use as only three parts in it. I used glass bottles as it gives a satisfied feel in terms of cleaning.
Glass bottles are recommended or plastic?
Your video is a life saver! I’ve been troubleshooting on the teat size thinking that’s the root cause of my baby feeding for hours per feed. Such simple technology to pay attention to as a solution! 🙏
Absolutely love this video, lots of help and extremely thorough!
Glad it was helpful!
You just saved me from a lot of stress and worry. Was constantly worrying why it seemed as though baby wasn’t getting any milk from the bottle and why it took so long to feed. Apparently, I assembled it wrongly and just following your 2 points made a big difference. Thank you.
Very useful and we must know correct way of using it 👍🏻
Thanks for liking
Your video is very helpful! I had no clue about the specifics.
Thank you for watching.
Helpful 😊
So useful, tnx so much!!
I'm new watchers here.. 2020.. thank
Thank you for watching :)
Thank you so much!
Glad it helped!
Thank you very much, it was driving me crazy trying to figure out when the air vent goes. Nine of the advent natural bottles ( I bought plastic bottle the set) had the notch on it. How do I make sure align it now? With the lips? Thank you
Apologies, may be they changed the designs.
Really veryyyyyyy helpfull thanku
Thank you for watching :)
Very well explained..
Thank you
Plz tell me the price of this glass feeder small size for my new born baby
Omg, I have being living my life wrong... Thank you! =)
You are so welcome!
Thanks
mine has only 1 air vent. Wich way should my baby go with his lips? The upper lip equal with the air vent?
Hi, keep the air vent at the lower lip side. You can check if the vent gets opened while baby Suckles. If not, keep at the upper lip. Basically, the vent shall open as shown in the video.
Oke thank you much!
And is it normal for it to come with a jet and not drops?
@@SedivaNL Usually there is a small jet in the beginning because of slightly high pressure inside the bottle due the air compression happening during the tightening of the lid and warm air inside the bottle. After that it is all drops only if you keep the bottle upside down. While The baby Suckles, only he can tell us it is jet or drops. :)
W W W. Where We Went yes he finish it within 5 minutes s that’s too fast isint it?
@@SedivaNL if the baby is comfortable with it, let her drink at that speed. It is OK. She will finish much faster once you use higher size teats later.
Thank you so much...Please inform me ..for a two month baby which number avent bottle should I take
Go for number 1.
Hello mera baby 7 months ka h nd bottle feed bilkul b nahi leta...plz kuch idea de ki kse usey bottle feed kraye
Thank you so much
Thank You for watching.
Hiii can u pls let me know where this product will be available in India.
Please check in baby shops, hypermarkets, some medical stores. Also it may be available for online shopping.
Problem of leaking.
Meri beti 4month ki ha per wo feeder ni ly ri bht try kr rhi hon kya kron kch samjh ni a rha
Hi I have 11 month baby never interested in bottle feeding I will give this bottle means they should drink milk. Pls give idea
Sorry for this delayed reply. Hi to your gem. :)
Could of done without the annoying baby noises other than that an informative video
your avent bottle looks different like glass bottle but mine was different like plastic🤔
Both glass and plastic are available. I used both types.
Is it glass or plastic bottle?
Both options are available. The teats are same for both glass and plastic bottles.
Glass bottle boil ktna minute kare
To disinfect the bottle, 2 minutes in boiling water is enough. There are steamers also available to clean it. Example philips, pigeon etc.
Plastic or glass
Both plastic and glass are available. The one you see in the video is glass.
Video could have been 1 min
Mu bebe odia este biberon no le gusta perdí el dinero le encanta dr braun
Avent should pay you for this marvelous instructional video. Thank you for taking the time to show every new mommy and daddy how to properly use the Avent bottle.
Thanks
i bought these expensive bottles bec everyone on the internet were using it, however the experience was horrible bec the baby was drinking from last 15 minutes but still the bottle was full of milk, i thought my 2 bottles were going to be wasted, however will start trying to use it again, thankyou verymuchhhh
Thank you sooo much for this! Accidentally threw out the instructions and noticed babe seemed to be getting too much air during night feedings, this is a lifesaver!!!
Why isn’t that info on the package? Way to go, tanks a lot!
Thank you for watching.
Lilian Fabiano it is in the info paper that comes with the bottle
@@babyandmereview186 i bought a box today and it did not say anything to about this which is what lead me here...o ly came with cleaning instructions
Very useful. Thank you so much. I'm looking for the reason why my baby looks so hard while eating. Even Philip website hasn't any specific guide
Thank you for watching. :)
Do bottle leaks automatically when hold upside down,
Also my baby is 2 months she is not able to tackle the flow ,milk is drowning from side of his mouth
Check the number written on the teat. The holes in the teat is different based on age of the child. Buy the right one for your child. If the holes are more, child can't handle it.
Iam hold ing upside down but the milk is not coming out?? What may the prblm?? Pls reply
@@nivethanivetha4343 milk should not be coming outside when you hold the bottle upside down. It should only come out when baby is sucking. It is more natural this way.
i've given up using avent natural bottle cause of leaking problem. Been trying this way before but can't solve. why they dont put the right information on the package how to assembly and whatever.
Do we need to put hole in this nipple?
This is gold. I, like many others, never bothered with reading the instructions. Thank you for this video. I will probably make a video utilizing all these points.
Glad it was helpful!
This is not in the manual or website even though Philips claim that they have useful question and answer section. Customer service is not helpful either. They say that such problem is rare. I will try this assembly method thank you
Thank you thank you thank you!!!! I didn’t know this until now and we’re nearly 7 months in smh the grief we’ve caused our baby geez 😢
Merhaba Aynı Ürünler Bende de Var. Kapak Atma Sorunu Var. Nasıl Çözüm Yolu Bulabiliriz...
Omg I never knew this before
Me too 😂😂😂
It is taking very long time for my baby to suck milk,, i took correct nipple size.
Please check if the lid is too much tightened. Please Don't over tighten the lid. It will stop air flow through the vents.
I purchased this bottle can u plz tell me Should I create more hole in the upper side of the bottle??
Plz don't put any holes anywhere.
Thanks a lot. You don't know how much you have helped me today. 🙏
Thank you for watching :)
You just saved me from a lot of stress and worry. Was constantly worrying why it seemed as though baby wasn’t getting any milk from the bottle and why it took so long to feed. Apparently, I assembled it wrongly and just following your 2 points made a big difference. Thank you.
So useful...loved d way it's demonstrated without speaking
Thank you for watching :)
Thank you!!! Thank you!! Thank you!!!!
Fabulous video. So helpful, was doing it all wrong. Kindly suggest which nipple should be used for 7 month baby, how many holes it should have and what kind of flow.
It depends on the suckling of the baby. Your baby may choke If you use higher number of holes. Always read the recommended holes on the teats.
I bought this expensive trash, will try a few more times, but what headache this is.
Thanks for the video, I’ll give this bottle another try again.
My 6 months old baby refuse bottle can I use Avent bottle? Is he like this bottle? Kindly reply me??? I m worried about it.
Watching this at 4 o clock in the morning. Thank you it really helps
Thank you for watching.
Thanks man...
Thank you.
Mom plz help
1: Phillips avent OR Tomme tippee?
2: Glass bottle or normal?
Plz give your reviews
Philips avent is good. No idea about tommytippee. Both plastic abs glass bottles are good.
@@wherewewent thank you
Thank you sooo much for this video. Very useful 👌
How much price is it
بتخزي عندي غاليه الفاضي
Thanks, i had the notch collapse on me 2 Times .. didnt know the issue. 😵💫😀 Philips site just said it means the air vent notch is blocked
Please try again. It will work fine. It is all about practice and you will get the idea within two days.
Amazing thank you for sharing!
I use square shaped philips bottle but the nipple suits for dis round shaped bottle I am very dissappointed 😬 anyways atleast I saw dis video and understood thank u so much
Thank you for watching.
Mera baby 3 month last h but vo bottle ki nipple de feed nhi krta KY ye nipple help keep skti h KY meri
Thank you so much for the video. 😊
Yo lo ensambló así y me gotea leche por las válvulas de la tetina
That’s a lot to worry about at 2am
Thank you for watching :)
😂
Ebone Cardenas
Assemble them during the day. You can then either just fill at 2am or fill, put in fridge and warm up at 2am.
omg i’ve been using avent natural bottles for almost 3yrs and i didn’t know these things
Thank you for watching. :)
Can we microwave it??
@@syedahzuberi5738 yes, only the bottle. Not the teat and its assembly.
Me also hahaha..
Hlo whethee u face any leaking prblm?? Iam facing leaking prblm... Can u help me out??
3+month beby ko kitne ml ki botal de
The teats are same size for all bottles. It is the number of holes in the teat that is important. The suitable age of child is is written on the teat pack. Please check it and buy accordingly.
If you find these bottles big, there are very small bottles available in other brands. You can try those too.
I wish ive watch this video 3 months ago.😒
Excellent...! This really helped me. Thanks a TON :)
Thank you for watching... :)
classic avent bottle got variable flow teat or not??
Umm this is so amazing and Phillips need to give you a million dollars for this. We gave up on the the Phillips bottles and switched to MAM then Dr. Brown because nothing was coming out from the Avent nipples. With that said my baby loves the nipple of the Phillips Avent bottle compared to Dr. Brown or MAM but nothing comes out. We decided to up the nipple size, but nothing still comes out so we gave up again. Now I know why nothing was coming out. I'm sure Phillips may have lost so many customers as a result. They need to hook you up!
Thank you for watching.
Hi, do you have Avent Natural or Avent Natural Response? Thanks
yrr y bottel kaha milegi medical stor pr mil jaygi kya
This is available in most babyshop, online etc.
Thank u thanku very very helpful
I don't what i m doing wrong. Milk flow stopped during feeding. If i hve to keep the side where no ie 3 or 4 is written on d baby right side or left or front. Plz help
Milk flow stopped means the air intake into the bottle is stopped. If the air path is clear, you will hear a rrr rrr sound from the bottle while the baby drink it. I think you have tightened the lid too much. if the lid is too tight, the airflow will be hampered as the flexible teat will get compressed... also make sure to press the teat at all four sides before the baby stat feeding. it will clear all the air paths. Just turn the lid to about 30 degrees and it should be fine.
Thank you so much😄👏👏👏👏👏👏
Rất tốt con tôi ko chịu bú bình sau khi mua bình này bú 2 lần đã chịu
Hãy làm theo các bước. Không khí vào chai có thể là lý do
When I tighten the lid the air hole moves from the notch. Is this normal?
It is normal. Small mis alignment of the teat is OK while tightening.
Same here🥲
Hlo sisy... For me same problem what to do???
@@Vini-zf1oi hlo is it got corrected?
@@nivethanivetha4343 no. I use it that way itself
Thank you so much God bless you.
better go with tomme tippe
Is this compatible with avent manual pump bottle
I don't know. I never used a pump bottle.
There are two notch on the teat..which one needs to get align with the notch on the holder?
Thank you for the how to use IT. Its thé Best vidéo on the internet.
Glad it was helpful!
කොහොමද ගෙන්න ගන්නේ
when i m attaching the nipple with bottle the nipple rotates n lost its alignment with holder...where i am wrong
Hi, Attach the nipple with the holder first as indicated in the video. Once it is attached to holder, it will be fixed to the holder fully. The attachment of the holder+nipple with the bottle is just a small turn, about 30 degree. The nipple will not lose alignment. I hope you are using "avent natural" type bottle and associated nipple.
After assembling nipple, while attaching to bottle, even with the slightest turn, nipple alignment is getting disturbed. Also, it starts leaking during the feed. It is a brand new Philips avent natural bottle purchased for our 12 days old new born baby. Request advice.....
I guess the nipple is not assembled properly with the holder. Please check if the nipple rotate freely on the holder. It should not rotate If assembled properly with the holder.
Yes, you are right, the teat wasn’t assembled properly. Thank you very much.
@@SatishKumar-er9cj how u assembled?
Like the tips hate the baby cries, kept thinking it was mine
Thank you for your support :)
Hi there! What could we do if lid becomes loose and milk leaking from the nipple
It became loose after so many times of sterilizing
Hi, the teat may wear out out due to prolonged use, abrasion while washing etc. You can buy teat alone from stores. No need to buy the whole bottle. Remember to buy the right size. The size number is etched on the teat.
Excellent for new mommy
Thank u so much.
Is it for 15 days baby
How can bye
Thank you for the video. This is SO FRUSTRATING that the bottle requires such delicate and specific use and there are no instructions included in the box! Tired parents don't have time to watch UA-cam videos on this. It should come pre-assembled in the correct orientation and there should be instructions on how to use it. Instead all the insert tells you is to wash the bottles before use (duh).
Thanks for sharing
Ho my god! Here a video that explains correctly how we have to use that kind of baby bottles!! I Was seeking for it hours and hours. Milles merci!!
You are so welcome!
Can’t stand the crying bits in the video.
Informative but find better background noises/music.
Tq
How many months we can use each bottle?
The bottle can be used as long as you want. The teats shall be changed if it gets worn. Also you need to change the teat when the child grow older, you shall buy teat with more holes depending on age.
It is cause any infection for babies? actually doctor suggested for me to avoid bottle feeding... because my baby got infection..
No.. It is very safe to use.
Agar ap sahi tarike se puri hygiene k sath bottle feed kroge to bche ko infection nhi hoga.
Thank u so much for this video....
Thank you for watching