This was super helpful! I can't believe my local mechanic was trying to charge around $200 just to do this! I'd love a video of you showing how to get to the bulbs inside the tail light.
Thanks so much for this! I need to replace the assembly on my driver's side and VW wanted to charge me $180 to put it in. I think I can do it myself after seeing this.
Thanks, that really helped! I need to adjust the rear bumper on my GSR as it seems to be hanging slightly on the left side and you need to take out the rear lights for that job. The only remaining issue is the fat Fender subwoofer on the right side of the trunk, I hope that's just a big plastic cover which can be removed
I really enjoyed the video. Can you make one taking out the bulbs and taking out the (2) near the tail pipe lower ones too. Thanks for the videos it was a money saver.
Ok so if you are replacing the whole tail assembly, i would verify that it is the correct one for your vehicle, because I've had that happen before a few times. Make sure you're plugging the cables into the correct sockets on the taillight, And make sure there in the right orientation, they only go in one way i believe.
Thank you for this video. I tried this and found VW engineers use a plastic white screw that is fitted too tight. If I use force on this it might break. If it needs to be that tight and needed a spring too, it is obvious you need a metal screw. They just want to save cost or weight, what about the cost to consumers? 😢
This was super helpful! I can't believe my local mechanic was trying to charge around $200 just to do this!
I'd love a video of you showing how to get to the bulbs inside the tail light.
ua-cam.com/video/WcTKgQEscp0/v-deo.html. Here's how to remove the bulbs
Thanks so much for this! I need to replace the assembly on my driver's side and VW wanted to charge me $180 to put it in. I think I can do it myself after seeing this.
Not much info on this so thanks a lot for the video!
Your welcome, I also have a video of how to remove the taillight bulbs also.
Thanks, that really helped! I need to adjust the rear bumper on my GSR as it seems to be hanging slightly on the left side and you need to take out the rear lights for that job. The only remaining issue is the fat Fender subwoofer on the right side of the trunk, I hope that's just a big plastic cover which can be removed
I really enjoyed the video. Can you make one taking out the bulbs and taking out the (2) near the tail pipe lower ones too. Thanks for the videos it was a money saver.
So we are replacing the trail light assembly and having problems plugging in the new light to the cable? Any suggestions?
Ok so if you are replacing the whole tail assembly, i would verify that it is the correct one for your vehicle, because I've had that happen before a few times. Make sure you're plugging the cables into the correct sockets on the taillight, And make sure there in the right orientation, they only go in one way i believe.
Can you make another one getting the bulbs out thank you
Sure!
I have a 2013 Volkswagen Beetle need to know how to replace all the bulbs in the tail light
ua-cam.com/video/WcTKgQEscp0/v-deo.htmlsi=Q4TeIGBAw0pKB98Y here's how to remove the bulbs
Super helpful..noticed my wife's light was loose. Turns out the retaining screw stripped out the slot in the housing. Rip
Is it the same on the other side where the sub is?
Yes both sides are the same
Thanks for the info. A tip if you don't mind:. Your camera was wiggling around a lot.
Idk if it’s too late but would love a video of bulb change!!
ua-cam.com/video/WcTKgQEscp0/v-deo.html Here's a video I made of how to remove the bulbs
Can you show me how to change the RIGHT side? Please... thanks
its the same on both sides
Thanks a lot helped so much!
MAKE VIDEO ON HOW TO GET THE BULBS OUT.
ua-cam.com/video/WcTKgQEscp0/v-deo.html. Here's how to remove the bulbs
Thank you for this video. I tried this and found VW engineers use a plastic white screw that is fitted too tight. If I use force on this it might break. If it needs to be that tight and needed a spring too, it is obvious you need a metal screw. They just want to save cost or weight, what about the cost to consumers? 😢
Thanks bro
Muchas gracias
Please make video replacing brake bulb
ua-cam.com/video/WcTKgQEscp0/v-deo.html I made a video how to remove the bulb
Yes make the video!!!
Yes please