Це відео не доступне.
Перепрошуємо.
Editing Luba's map may minimize the donut holes, let's experiment!
Вставка
- Опубліковано 22 тра 2024
- If you're thinking about purchasing a luba please consider using my link. Amazon pays me a commission for people that click it.
Thanks for watching and don't forget to like and subscribe! :-)
linktr.ee/craz...
Good job. It's allways satisfying when a problem is solved.
It takes some time, but well worth it.
One afternoon of frustration when remapping and remapping, but then Luba does everything much better and you can watch it mow like a pro.
Thanks for the tips. I noticed mine does those jig-moves when crossing through the channel, i.e. after it enters the next zone sometimes it kind of "looks around" to align itself best for starting to mow.
The thing with the donut in front of its home - I am sure they could fix that as well - it just looks like they simply forgot to do it until now - because when Luba approaches its home, it does make (usually) one multi point turn, then it stops and does the donut. So, basically what it would need to do is just make another multi point turn and then it would already be aligned with its back to the charging station.
Wow Crazy, thanks for the tips! Try making the donut holes a "No-Go" zone until new grass grows there. :^)
Great video. When you try to edit a zone or delete a channel, you can also just click on it, and it automatically selects. The same applies to no go zones. So much easier to identify.
Every time I use Luba it's almost like a new experience the app changes so often 😂
@@Crazypostman Thankfully, some things turn for the better😀
Hey, glad that worked out for you, that clicking noise sounds like it might be a cog slipping if there is one, I’d assume wheels are direct drive though, otherwise a possible wheel motor starting to fail, might be time to send in for a warranty repair and avoid zero turn setting, too much strain IMO, especially with the old style wheels.
Don't forget to turn multi point turn back on.
it may be searching for signals
Again keep up the Luba videos
Thank you I enjoy learning how to control program my robot
If you care to regrow grass on the doughnut holes, you could try leaving that space out from the mowing zone (make a channel around it if required to drive near that place). Great to see some these videos... wonder how Yuka will perform.
Can't wait to try YUKA!
What is yuka
@@Everydayytber It's a different robot model that the makers of Luba are releasing, it's two-wheel drive and it has a lawn sweeping attachment.
They could fix the spinning when docking. They just don't. All they need to do is program it to do more of a multi point turn. This is something it should be doing anyway when you have it set to multi point turn.
I've brought this up to them many times, and they claim they can't do it. I don't buy it.
You said you were reaching out to various companies to see if they would send you mowers for review, have you considered Yarbo for their Modular Yard Robot - it looks like a promising competitor for the Luba and ideal for your parents' property.
Yes I sent them an email They didn't answer it
@@Crazypostman I've seen several reviews suggesting Luba is the current leader in the field, maybe other brands don't feel they would review favourably in comparison.
i have a donut near a overlap, im going to try this, ALSO i have an issue with editing the border in a totally separate area, i see the app changes what you edited slightly, im thinking its doing something similar in my area im trying to edit, only its little change is somehow causing a boundary issue. im getting a 1130 error(the new perimeter is divided into multiple sections by other perimeters) have you had this issue?
I've also found if you use multipoint turn it needs an additional 2 to 4 in of space If you use zero turn it's pretty accurate on your boundaries
@@Crazypostmanso you think if i change to zero turn and retry the boundary edit it may have a different outcome?
@@davidmagazzi514 only if you mow with it on zero turn also. If you mow on multipoint turn it's going to need an extra 2 to 4 in no matter if you mapped it on zero turn or multi-turn
@@Crazypostman interesting, i didnt think it would matter because when you program it you drive it yourself and it would take the 2-4 inches into consideration. i did notice it goes outside the border a bit when on multiturn ending the rows
@@davidmagazzi514 yeah the center of the bumper is in the right place for a multipoint turn but the edges of the bumper if it's making a left or right turn will hit so they didn't take that into account correctly When programming multipoint turns.
Did you see the new tron videos on the robot mower
Yes I've watched them, which one in particular?
nice Video thank you
Might be looking for a signal?
🤔🧐📡🛰️📶😊
Are you getting a message every time you want to enter the "Map" to check for updates? I do, then it checks, tells me I'm updated but then goes back to check for the update again. I have to push the map button several times before it actually enters the map area.
Nope, I've never once gotten that message... It would actually have been kind of useful as long as it worked properly and only told me once haha
Yeah, totally looks like you drew a finger. 😂
Infrared has a minimum range of 5 meters with a clear line of sight, otherwise, you would have had many issues with your TV remote when you were younger.
I don't really agree with your statement that Mammotion can't do anything to prevent the donuts, because it can be solved both software-wise and with the existing hardware.
You have a large lawn and can essentially hide your Luba, but your lawn size is not typical. In a "small" garden, a 1.5 x 1.5m hole is very noticeable. Mammotion needs to improve this, and I think you shouldn't encourage them not to address it in your videos.
Please don't take this the wrong way.
Best regards.
Just because I said don't know how they would go about fixing it, I certainly didn't mean it to come across like I don't encourage them to try to. I really hope they do something to mitigate it somehow.
Well at least ou can still do an edit. Every edit I have tried since the update ends up in an error and if I really want to do the edit, I have to delete the area and remap the whole thing.
The only mapping error I've had lately is the you've crossed into the zone twice error
Did you find the source of the squeak?
@@Crazypostman I believe mine says multiple times but I would have to check. No matter how hard I try multiple times, I get the error every time.
Did your dad yell at you after you gouged the grassy dirt area?
Not yet, kind of waiting for that text message when he watches the video 😂 I went over to film this video and went right back home aside from sticking my head in the door and saying hi and bye.
Hi
👋