Absolutely, I’m actually going to be doing something to completely block off the fuel system from the rest of the elements around it, that will most likely be shown in the next video with it when it’s all done 👍🏻
@@motomigsofficial That's awesome. Keep improving the cart. Can't wait to see it fully done and tires shredding. Just throwing it out there but maybe once everything is where it should be maybe you should bring the entire cart to a custom muffler shop and have them build one for you that has a good exhaust flow and even make it come out the sides by the rear tires. Oh and some nice Chrome rims would give it some life.
@@mattriella6776 that would be his best option. Especially since that Bicycle gas tank is made out of cheap chinese metal. That tank would start boiling the fuel from the heat after a few runs.
Looks like your welds are getting better! Keep practicing! Also, get a bigger gas tank man! Seeing that tiny little motorized bike tank is driving me nuts!!
Miggs. I’ve got some mufflers for you if you like me to send them to you. They’re used but it’ll probably fit your two inch pipes. Just put some screws through the sides of the fitted end and you’ll be good. Best way to tune your afr is to use a blue tune. It screws in like a spark plug and it gives you a color code. Blue means your tuned right Red is too rich and white is too lean. Best way for a backyard job. Let me know little brother
Badass brother. Sounds fantastic and I’m super stoked to see the finished product. Looking forward to your future endeavors but I can’t wait to see this beast done and ripping up the road. Gnarly.
Might be able to get some Harley drag pipe baffels that fit , give you more back pressure and quite it down a little bit.keep up the good work, glad to see you improving your work.
Bro..that sounds awesome im so proud of u..u worked atbthis forever...good job...wow. im so happy..make sire u button it all up...great job moto bro...cant wait till its done..keep it up
The Exhaust mufflers they make a 1 foot muffler that I run on my backhoe an welders there basically a cherry bomb what they call it but it will still give that nice rumble an one other thing you might rebuild that first side to match the other for equal pressure on your cylinders but it sounds great let's see it go on a drag strip or something more then the back yard
And when you're welding together and make sure you spot weld over spot weld all the way around the pipe if you don't know how weld that's an easy way to do it
Looks like you're running Sam exhaust I am on a three wheeler I have pipes most likely the same size try Volkswagen exhaust tips will quiet it down a bit but still sound really good
Been watching for a while and can see youre definitely climbing the learning curve. Youre doing alot better! Things seem to really be coming along nicely. Just be careful welding any kind of coated metal like that exhaust tubing or anything galvanized. The fumes cam really mess you up!! Keep on keepin on brother!
Hell yeah man well done so can't wait to see this thing rip Man keep up the good work and everything about the nascar is absolutely beast man looks and sounds mean hope she rips just as good I'm sure she will 😁👍
I'm new to welding as well. I had that very same welder. I recently bought a forney easy weld 140 fc-i I got mine for about 230$ I can't even kinda explain how much better my welds are after getting the forney
Man I love this thing and how much effort you put into it just be careful of where all that heat goes I almost burned my shop down test runing an engine the exhaust lit the fuel tank n lines up and as we the engine looks like it doesn't have steady flow of gas with it being so low it sounds like ther ain't enough gas and you can see it sucking air bubbles in the one gas line doesn't seem to have enough vacuum suction from that low and the fuel is too heave to constantly flow up idk it still looks sick I give you props.
Hey there Motor head How are ya doing? Are there any Rules and Regulations that ya have to go through on Racing these cart? Is the a curtain age that ya have to be?
Dude, I've been watching this channel for a long time if I don't see the body on this car and you taking it out ripping and Cutting Loose somewhere I am done. Each new video feels like a tease.
Migs, did you go to a muffler shop? They have all the common sizes of muffler pipe, hydraulic bender/swagers; here in Dallas, the sack of bends you showed would be about twice the 10 foot stick of pipe they would cut up. If you make good wire form route bends, they can bend up some pretty complicated one piece pipes for you. And most will likely have 1 1/2 pipe. Great turn out though!
Its defo sounds & looks better with that Exhaust ya have made i all ways like seein projects comin along in the end Grate job fella keep it up 😁 From daniel at Notts modified car channel England / uk
Mixture screw on the carb only adjusts the mixture at idle and very low throttle if you want it to run leaner at high rpm you need to change the main jet, midrange is the needle ,and idle and really small throttle is the pilot jet
I have my doubts about this thing really being able to rip I think you're going to have a lot of issues with all the unfinished parts that are going to start breaking the frames not completed the jackshaft might be an issue still there's a lot of things that I just think are going to be dangerous no matter what
@THAT Guy he has said many times he dosen't know what he is doing and you can tell by how he talks about things and calls things the wrong stuff this is his first build
Brooooooo no! You should of got all the exhaust from an exhaust shop. They could of made you bends and gave you a stick of tube. For probably cheaper than all the AutoZone exhaust. But I'm still glad to see you kicking ass on this thing. Keep it up 🤘
You can go to any muffler shop they should have any size pipe you want and they will be able to bend it anyway you want are ask them if you can go through their scrap pile
Better put some exhaust wrap near the gas tank.
Kaboom.
Absolutely, I’m actually going to be doing something to completely block off the fuel system from the rest of the elements around it, that will most likely be shown in the next video with it when it’s all done 👍🏻
@@motomigsofficial
That's awesome. Keep improving the cart. Can't wait to see it fully done and tires shredding.
Just throwing it out there but maybe once everything is where it should be maybe you should bring the entire cart to a custom muffler shop and have them build one for you that has a good exhaust flow and even make it come out the sides by the rear tires.
Oh and some nice Chrome rims would give it some life.
how about just moving the gas tank......
@@mattriella6776 that would be his best option. Especially since that Bicycle gas tank is made out of cheap chinese metal. That tank would start boiling the fuel from the heat after a few runs.
Doubt he's keeping that tank at least hope not he won't make a lap it's so small
Looks like your welds are getting better! Keep practicing!
Also, get a bigger gas tank man! Seeing that tiny little motorized bike tank is driving me nuts!!
could you do a crossover video with cars and cameras that would be so cool!
Go against their cross kart
This kid makes the cars and cameras guys look like geniuses...and they're dumb!
Yes do a crossover with delorean kart
MUCH RESPECT. sounds sick. wow
Ngl I only like the nascar build videos even though I've been watching for 2 years
Same but I like a change once a while.
Same, been here for 2 years and this has been the best build so far
@@ToxinGamingYTS its his only build i do outside the box stuff but dont have a big fan base
So close to 100k!! Been here since 11k and you definitely need to go on a street ride in it now!
Thanks for sticking around man! We’ll get this thing out on the street asap!
Miggs. I’ve got some mufflers for you if you like me to send them to you. They’re used but it’ll probably fit your two inch pipes. Just put some screws through the sides of the fitted end and you’ll be good. Best way to tune your afr is to use a blue tune. It screws in like a spark plug and it gives you a color code. Blue means your tuned right Red is too rich and white is too lean. Best way for a backyard job. Let me know little brother
Since the new pipes aren’t entirely sealed from a weld bead just be careful with exhaust leaks. Might get fumes inside the driving region of the kart
Sounds amazing. Keep up the great work migs loving the videos.
Thanks!! Glad your enjoying them!
Badass brother. Sounds fantastic and I’m super stoked to see the finished product. Looking forward to your future endeavors but I can’t wait to see this beast done and ripping up the road. Gnarly.
You should rev it against his friend with the mustang.😉
That thing sounds amazing. You need a wellie bar
I've watched the whole progression of this project. You did a great job kid!
Might be able to get some Harley drag pipe baffels that fit , give you more back pressure and quite it down a little bit.keep up the good work, glad to see you improving your work.
I like how he has a solution for everything and how he explains how
That thing sounds wicked!! nice work!
That is actually dope.
Thats sounds way way better. Nice job!
12:37
Thanks
Bro..that sounds awesome im so proud of u..u worked atbthis forever...good job...wow. im so happy..make sire u button it all up...great job moto bro...cant wait till its done..keep it up
Great vid, been around your channel, before you bought this cart, it's coming along great
It only took all year
I love EM straight back like that.
It’s pretty mint but your neighbour must be getting pissed with the projects 😂😂
Bro holly hell that thing sound freakin mint keep up the good work and can’t wait to see that thing scream down the road💯🔥🏎💨
The Exhaust mufflers they make a 1 foot muffler that I run on my backhoe an welders there basically a cherry bomb what they call it but it will still give that nice rumble an one other thing you might rebuild that first side to match the other for equal pressure on your cylinders but it sounds great let's see it go on a drag strip or something more then the back yard
Take one of your straight pipes and wedge cut it then bend to your desired degree and weld it. Very easy to do and effective
Neighbors must love you😂😂
CallumG 543 ikr lol
It sounds like a Ford GT great work buddy
Sounds mint, gives me chills, love your vids keep it up mate
And when you're welding together and make sure you spot weld over spot weld all the way around the pipe if you don't know how weld that's an easy way to do it
That sounds so sick👍👍👍
please keep making these vides how u have been making them, i love these vides, the only reason why im here tbh
yay, about time, it sounds way better now
Hey Miggs, that elbow that you said you cant find anywhere looks like it has a part number on it. Maybe you could have the parts store order more?
Looks like you're running Sam exhaust I am on a three wheeler I have pipes most likely the same size try Volkswagen exhaust tips will quiet it down a bit but still sound really good
12:05 for first start up
That thing sounds Wicked
Man sound good and strong 👍👍👍👍👍👍
Been watching for a while and can see youre definitely climbing the learning curve. Youre doing alot better! Things seem to really be coming along nicely. Just be careful welding any kind of coated metal like that exhaust tubing or anything galvanized. The fumes cam really mess you up!! Keep on keepin on brother!
It’s like a lambo😂😂😂❤️💯 good video bro
Nice build. Appreciate creativity
Damn that's thing sounds crazy
Bloody hell i kept expecting something to catch on fire grinding and welding in that gas/oil/wd40 soaked chipboard floor😳 keep up the build 🤘🤘
Are those pvc pipes attached with clamps?
It looks like the pvc pipe would melt
Hey are you going to make more videos on the Baja 90
Dude it sounds great!
Hell yeah man well done so can't wait to see this thing rip Man keep up the good work and everything about the nascar is absolutely beast man looks and sounds mean hope she rips just as good I'm sure she will 😁👍
I'm new to welding as well. I had that very same welder. I recently bought a forney easy weld 140 fc-i I got mine for about 230$ I can't even kinda explain how much better my welds are after getting the forney
Are u goin to paint the roll cage
Flapper and paint makes a welder you aint lol na good work bud keep up the good work.
U done good welds getting better,I would move fuel tank
Geat job and geat vid as always bro mabe try make ur own tube muffler kinda like silencer
Sweet job on the exhaust! You’ve come a long way since you made that sketchy exhaust tip with the jagged edges
...... Jb weld😂
Man I love this thing and how much effort you put into it just be careful of where all that heat goes I almost burned my shop down test runing an engine the exhaust lit the fuel tank n lines up and as we the engine looks like it doesn't have steady flow of gas with it being so low it sounds like ther ain't enough gas and you can see it sucking air bubbles in the one gas line doesn't seem to have enough vacuum suction from that low and the fuel is too heave to constantly flow up idk it still looks sick I give you props.
Hey there Motor head How are ya doing? Are there any Rules and Regulations that ya have to go through on Racing these cart? Is the a curtain age that ya have to be?
Wow sounds pretty bad ass.
Dude, I've been watching this channel for a long time if I don't see the body on this car and you taking it out ripping and Cutting Loose somewhere I am done. Each new video feels like a tease.
Migs, did you go to a muffler shop? They have all the common sizes of muffler pipe, hydraulic bender/swagers; here in Dallas, the sack of bends you showed would be about twice the 10 foot stick of pipe they would cut up. If you make good wire form route bends, they can bend up some pretty complicated one piece pipes for you. And most will likely have 1 1/2 pipe. Great turn out though!
You should really do the side exhausts, it fits so much more to a naskart than those double barrel things
sounds awesome hope you don’t get any noise complaints
Nice man can’t wait to see it rip
Sounds so good I love it
love how it sounds
Wow sounds deadly take it out for a rip not in the yard Mann keep uploading stuff like this
Sounds like a old truck. Been watching since the mini bike videos
Its defo sounds & looks better with that Exhaust ya have made i all ways like seein projects comin along in the end
Grate job fella keep it up 😁
From daniel at
Notts modified car channel
England / uk
Just after 12:30 check the flames at the right exhaust
That thing is coming together nicely, there is only one thing to improve, those chunky welds haha 😜, other than that keep up the good work 👍
Looks like your welding has gotten better maybe try holding the welder closer to the end it might be a bit easier.
Mixture screw on the carb only adjusts the mixture at idle and very low throttle if you want it to run leaner at high rpm you need to change the main jet, midrange is the needle ,and idle and really small throttle is the pilot jet
Definitely super rich
feels good not to wait 2 weeks for you to upload lol
looks great, sounds like an STI at high rpm
I have my doubts about this thing really being able to rip I think you're going to have a lot of issues with all the unfinished parts that are going to start breaking the frames not completed the jackshaft might be an issue still there's a lot of things that I just think are going to be dangerous no matter what
@THAT Guy he has said many times he dosen't know what he is doing and you can tell by how he talks about things and calls things the wrong stuff this is his first build
Sounds great as is
INSANE!!! EPIC!!!
Put some bigger tips on it like 3 or 3.5 inch tips would change it even more its so sick tho great work love the vids
There’s a lot to do before the exhaust
Brooooooo no! You should of got all the exhaust from an exhaust shop. They could of made you bends and gave you a stick of tube. For probably cheaper than all the AutoZone exhaust. But I'm still glad to see you kicking ass on this thing. Keep it up 🤘
Also tuning carbs requires velocity stacks
Get 2 step for it that would be awesome
Might subscribe just to see this thing rip 😂👍🏻
Look for spoon s1 end cans they 2ich
Sounds damn good
Sounds a lot better if you got the other two carburetors on their its wood sound mean
I seen flames the first time you revved it
Keep grinding migs
Wow that sounds good
WOW it really does sound like a mini nascar lol
12:37 flames!!!
Great job bud
I want it now
Love yr videos
FIREEEEEEE!
Hey mig you should polish the pipe
You could of done a Y pipe to join both cylinders at the end
Awesome thumbnail👍
Like a v8 mustang❤
you need a bigger jet it dosent rev up
You can go to any muffler shop they should have any size pipe you want and they will be able to bend it anyway you want are ask them if you can go through their scrap pile