Kitchenaid Mixer Teardown and Repair - Trash to Treasure
Вставка
- Опубліковано 28 сер 2024
- I was given this Kitcehnaid from someone who was throwing it away. I figured it was at least an opportunity to tear it apart, but it turned out it was fixable.
Things I used in this video. Using my links helps the channel.
Venom Steel Nitrile Gloves - My favorite shop gloves
US and World - amzn.to/3xJVyN1
Canada - amzn.to/3HivJXy
Kaiweets HT118A - My favorite meter
US and World - amzn.to/3G8p9SW
Canada - amzn.to/39ReOyM
The video skips a step. There is a pin that has to be punched out just before the double screwdriver is used to remove the mixer shaft.
Ahh good call
yeah. not a thing to miss. I was wonder what the deal was.
Yes, you must tap out that pin which holds that planetary gear in place. It is directional, so give it some taps (with a punch) one way and if it doesn't start to move, turn it around and tap it the other way.
Generally, no power at all, check your brushes. Power and no attachment movement, nylon worm gear needs to be changed. Mixer pulses or runs for a few seconds and then stops, change phase control board. Speed fluctuates or doesn't run at full speed, try to adjust speed control plate or replace it. You must calibrate speed control after removing the plate for any reason. Hope this helps someone.
THANK YOU! I took those brushes out and put them back wrong too! Thoughts broke my mom’s old mixer😢.
Hey, that mug looks familiar!!! You are a renaissance man!!!
haha I look at that every day. Reminds me of good times.
I normally replace the grease every 2 to 3 years. It will separate and will get wet causing drips inside and sometimes out. And I would buy a new cable is cheap and easy to replace with the 90 angle connectors. Good job by the way.
Mine had the exact same problem! Thankyou!
Nice work. Time to make some cookies 🍪👍
haha that's the plan.
Let's goo a new video
Woohoo. Thanks for watching
@@AnotherMaker dude I watch like most of your videos
@@DoomsdayDatabase thank you ... that means a ton
I wish I was living closer to you just in I case I might need somebody to repair 2 of my KitchenAid Mixers. Nothing wrong with them but I’m saying just in case.
I wish we lived closer too. No one here cares about my maker stuff :)
@@AnotherMaker i only live somewhere in Northwest Indiana.
Hello
Can I send you another model so you can guide me on how to disassemble it?
I’ve got the beauty ring off my Artisan tilt head. But there not that much space to pry two screwdrivers in between and it’s just not wanting to budge. Is it possible my doesn’t detach? I don’t want to break it
I can't say for 100% sure but I'm pretty sure it has to detach. Mine was a pain
@JazzyPhay15 There’s pin that has to be punched out before prying, not shown or mentioned in this video.
not very visible
You forgot to mention the pin on the output boss
Sorry
How does that beauty ring come off? 6:25
It's tough but it just slides down
@@AnotherMakerPeople use a screw driver to force it down, but this can easily scratch it. I prefer to use something made of plastic. I used some tools that are made for removing trim pieces for car stereo installation. Works perfect without scratching.
That's a lot of grease! Now bake a pie.
Haha... Yeah I'm glad I was finally able to keep the proper grease on the inside versus the grease on the outside.
Release the shmu!
MMMM. Brush Meat - LOL
I see you are a man who likes other fine UA-cam channels
Thanks, it was my brushes as well. I had no idea, i got it today, took it apart to clean, and put the brush back in wrong after cleaning.
I'm really glad to hear that!