Це відео не доступне.
Перепрошуємо.
Screen Printing: Common Mistake - Over Exposed Screen
Вставка
- Опубліковано 29 лип 2023
- This is just a quick video showing what an over-exposed screen can look like for those struggling to get their burn times dialed in.
Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
Scoop Coater: amzn.to/3J0nPnL
Emulsion: amzn.to/3MU77aU
Emulsion Remover: amzn.to/3J2ARRs
Haze Remover: amzn.to/3Ni26dj
Mesh Degreaser: amzn.to/43KCkny
thx for this i have the exact same issue
Thanks for checking this out. Good luck on your screen printing journey!
anyone have any idea why when i go to wash out my screen after exposing. the image that wasn’t burned becomes bubbly in a way and i end up having to peel my image instead of it washing out nicely
Either it is under exposed, or more likely, your screen needs to be degreased better before coating it. After reclaiming, it is very important to use a degreaser so your new emulsion sticks to the screen properly. Good luck!
You should not spray it out from the print side. Just get some water on the ink side than spray from the shirt side.