Restoration of Vintage Paraffin Iron

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • I had mixed feelings regarding this little Iron, I bought it over two
    months ago but wasn’t too enthusiastic about restoring it. I loved the
    character and design of this iron but due to the fact there were processes
    used during the manufacturing which I new I couldn’t recreate I had my
    doubts. The rust damaged surface on the base plate was a big problem
    as I had no way to resurface it. I had initially thought maybe I could use
    a high temperature chrome spray but I couldn’t find any so I settled on the
    polished finish which doesn’t look too bad. Another problem I encounted
    was the ceramic finish, I had bought the Titanium stick to fill an repair the
    damaged parts but this didn’t work out the way I wanted so I had no choice
    but to remove it and repaint.
    I thought that once I had over come these little issues the rest would be
    reasonably straight forward but one more thing had to go wrong. While
    cleaning the generator the throttle lever broke off, I have looked on line
    for a replacement but as yet I haven't found anything suitable. I will keep
    looking and hopefully find something so I can finish it properly.
    I feel very disappointed with the way this one ended but sometimes
    that’s the way it goes. Hopefully in time I will have a short video ready
    with the Iron working.
    I hope you like the stop motion in this video, I have tried to add it just to
    give a little bit more light hearted entertainment. Let me know what you
    think in the comments below.
    Duration
    Working hours Lost track of time on this one
    Editing 10+ hours
    If you like this restoration video you may be interested in my other
    videos.
    Davy Lamp • Davy Lamp Restoration ...
    Beautiful 1940's Bike Lamp • World War 2 Bicycle La...
    Beautiful 1970s Scales • Beautiful 1870s, Scale...
    Vintage Lamp Restoration • Rusty Paraffin Lamp Re...
    Fuel Can Restoration • Esso Fuel Can Restoration
    Primus Blow Lamp • Primus Blow Torch Rest...
    Union Drill Press • Unique Restoration of ...
    Bill Hook Knife • Old Tool Restoration, ...
    Hedge Knife • Old Tool Restoration, ...
    Points covered in this video
    Antique Restoration
    Tool Restoration
    Old Tool Restoration
    How to Restore
    Vintage Restoration
    Tool Restoration Channel
    Hand Tool Restoration
    Restoration Videos
    Tools used
    Nikon 18-55mm Lens amzn.to/2XdKXIS
    Nikon D5100 Camera amzn.to/2Xmx4rW
    DeWalt 18V XR Combi Drill with Batteries amzn.to/2Ww5KDs
    Dewalt HSS Metal Drill Bit Sets, 10 Pieces amzn.to/2JLpAcj
    DeWalt 18V XR Body Only Impact Driver amzn.to/2HJL2g2
    DEWALT li-ion Battery 5Ah, 18 V, Black/Yellow amzn.to/2JLUt02
    CLARKE METALWORK BENCH GRINDER amzn.to/2TFURgc
    CLARKE METALWORK POLISHING KIT amzn.to/2HOwM5A
    Rothenberger Wide Jaw Wrench amzn.to/2HKftT7
    Rothenberger Water Pump Pliers amzn.to/2JLEcbF
    Rothenberger Superfire 2-Turbo Brazing Torch amzn.to/2WsFmdB
    Stanley - STANLEY Screwdriver Set 34 pcs amzn.to/2Ow0Kf8
    Connect Wire Wool amzn.to/2HMtf7V
    Draper Wire Scratch Brush amzn.to/2CFBsqo
    Coral Zero-Loss Paint Brushes 5 piece pack set amzn.to/2FJTDNp
    Rolson 16pc File Set With Pouch amzn.to/2YxAbux
    Samsung Galaxy S7 Edge 32 GB SIM-Free Smartphone amzn.to/2HLyyEz
    Mpow Selfie Stick Tripod, phone holder amzn.to/2HM1MTT
    Bosch Professional Corded 240 V Angle Grinder amzn.to/2WpzuS8
    (PACK OF 10) Parweld 115mm Grinding discs 4.5" amzn.to/2YxBt8R
    Hammerite 750ml Rust Remover Gel amzn.to/2Uj9YRe
    Evapo Rust, rust removing solution 5L amzn.to/2KVTyei
    WD40
    This is a hobby for me which I enjoy doing in my spare time. I am not a professional restorer, Painter or fabricator and I know some of my techniques may not be upto the standards of some professionals on here. Having said that if you think you know a better way to complete these works I would be happy to listen, I will learn from each project to bring you not only a nicer finished piece but also
    a cleaner piece of editing. Please leave your comments below and ill do my best to reply to them.
    Kind Regards Unique Restorations
    Follow me on Instagram Unique_Restorations_uk
    Disclaimer, I have used various tools and materials in my videos which i
    have left links to the above. Some of the items may differ slightly to my own tools as mine are a few years old now. These links will take you direct to the Amazon website and the listing you selected. If you make a purchase Amazon will pay me a very small percentage which will be invested to buy new equipment and new projects.

КОМЕНТАРІ • 165

  • @amille223
    @amille223 4 роки тому +2

    Hi Brian,
    I’ve watched almost all of your videos and am happy to say that your channel is one of my favorites, along with My Mechanics. That puts you in good company, for sure.
    I think what I appreciate most with your channel is not only your quality workmanship and attention to detail, but your honesty and respect for your viewers. I’ve never seen a
    restorer that takes his valuable time to respond to so many viewers comments and suggestions. By doing that, it’s obvious that you’ve gained the utmost respect from your viewers, as their comments are seldom critical or disrespectful.
    You respect them.....they respect you, and isn’t that how it should be?!? If only politicians could understand that concept. Due to this mutual respect, it’s an absolute
    pleasure to watch you work and how you interact with your viewers. Thank you for that.....truly!!

    • @UniqueRestorations
      @UniqueRestorations  4 роки тому

      Hi Amille223, Thanks for your comment, I appreciate you taking the time to write it. I think it's important to keep in touch with your viewers as they can sometimes offer some great advice on improving the restorations, which ultimately makes better videos for them to watch. Regards Brian

  • @iksaar2
    @iksaar2 5 років тому +19

    Good restoration overall, I just find it a shame to have blown the enamel to replace it with a duller painting in my opinion.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +5

      Hi Iksaar, I think your opinion is right, I had put off working on it for so long as I had no idea how to replace or repair the enamel and teflon coating on the base plate. I had hoped for a much better out come. Thanks for your comment. Regards Brian

  • @chakathewolf
    @chakathewolf 5 років тому +2

    oldcolemanparts.com look under iron parts.

  • @UniqueRestorations
    @UniqueRestorations  5 років тому +15

    Hi There, I found this little 1920s Iron a while back which i thought had great character and perfect for restoring, Hope you enjoy the video

  • @pamelanadel3787
    @pamelanadel3787 5 років тому +6

    The beginning was just like the old Gumby clay animation show I watched as a kid! Loved it. Great restoration.

  • @kfl611
    @kfl611 3 роки тому +1

    Better than new!!! I was waiting for you to slice a finger when you were using your x-acto knife. Great job.

  • @thingsofsuch
    @thingsofsuch 5 років тому +1

    How do you like your shirts sir, burnt to a crisp or soggy as fuck? Well there is no in between so here you go one, one toasted button down shirt. That will be a nickel, see you soon!

  • @garymucher9590
    @garymucher9590 5 років тому +3

    Nice interesting video with special effects. That iron is very unusual but I like it. Thumbs Up!

  • @dunydesignsCamarasyMas
    @dunydesignsCamarasyMas 3 роки тому +1

    wyf
    ? these is an extrange iron man so beautiful job congratulations.

  • @musicurio
    @musicurio 2 роки тому +1

    I don't want to sound unfriendly, and it is great that such wonderful items are still being lovingly cared for, but would it not have been so much better (as others have said) to KEEP the blue vitreous enamel? The colour and texture are (were) so lovely, AND it was designed for the high operating temperature.
    Additionally, and more significantly, from what I can see, it is NOT a paraffin iron. These need a pressure pump and vapourising section. This is why your "fuel" would not work. In all probability (again from what I can see) it operates with alcohol ("meths") Maybe someone else has picked this up - they certainly should have!!
    Had you filled the grain on the oak handle that you made (and matched the colour) it would have been equal to your excellent work on the metal parts.

    • @UniqueRestorations
      @UniqueRestorations  2 роки тому

      Hi Musicurio, I had this iron for a long time and put off working on it for the very reasons you mentioned. However my excitement and curiosity got the better of me. The results are not what I hoped for and I completely agree that I should have kept the original coating. This is an early video I made and hopefully my techniques have improved since then .Thanks for taking the time to comment. Regards Brian

  • @markharris5771
    @markharris5771 5 років тому +10

    Every video is an improvement on the last. Either new methods or new tools or even more interesting and challenging restorations but the quality is always going up. Thank you for posting it.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Thanks Mark, I think you have to keep improving both with the filming side and the restorations to give a better viewing experience. It's a process I'm really enjoying. Thanks for your comment Mark. Regards Brian

  • @benkanobe7500
    @benkanobe7500 2 роки тому +1

    Beautiful. You are a Master Craftsman. I couldn't believe you made that handle with a drill motor! You inspired me!

  • @richardsalsbery1101
    @richardsalsbery1101 3 роки тому +1

    I have my Grandmothers it still has the box!!!

  • @leahcimressik5994
    @leahcimressik5994 4 роки тому +1

    you are a gagbird! The tricks are already vor Movie. Good work, as always! The colors would I have tried to powder?

    • @UniqueRestorations
      @UniqueRestorations  4 роки тому

      Leachim this is not my finest piece but I do agree powder coat would have been better. Regards Brian

  • @SarahsCookeryTips
    @SarahsCookeryTips 5 років тому +7

    Fab restoration, loved the motion at the beginning and iron looks fab

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Sarah, I enjoyed making the stop motion and thought it would add a little humour. Regards Brian

  • @vanceguerena8889
    @vanceguerena8889 5 років тому +3

    Great restoration
    That's a pretty interesting machine
    It looks dangerous to use
    Thank God for electricity 😁

  • @blacknight1003
    @blacknight1003 5 років тому +2

    Although of no use nowadays, it is useful to see what the forerunner of the modern household iron looked like back then. Can’t help thinking that it’s an ugly piece of machinery which cried out for improvement even back then.

  • @cynda99
    @cynda99 5 років тому +3

    Loved the stop motion. Made me laugh.

  • @georgelamont9542
    @georgelamont9542 5 років тому +2

    I thought the camera work at the start of the video was very funny, with the WD40 chasing the rusty Iron.
    Again you did a brilliant job, welldone, keep them coming.

  • @shadimalpz1717
    @shadimalpz1717 5 років тому +2

    I had never seen such an iron. I can't imagine what kind of fuel it uses, or how it works.I read everything you wrote in the description of the video but nowhere did you explain anything about the operation of this beautiful ancient artifact. I would have liked you to explain briefly in the video what is that container that goes behind the iron, what fuel it needs and how it works.Good video. It's a pity you couldn't complete the restoration.

    • @pfadiva
      @pfadiva 4 роки тому

      It works rather like a stove or cooker burner. The container on the back holds the fuel (probably white gas) and pressurizes it. The long black thing inside is the burner that heats the sole plate (the part that touches the clothes). The black knob under the fuel container is the fuel valve and regulates the flame. Add fuel, pump it up like a camping lantern, light a match, and open the fuel valve. Regulate for a steady flame, and iron away. An improvement on the stove-heated flat irons, especially on a hot day.

  • @thegrimjeeper3427
    @thegrimjeeper3427 5 років тому +2

    First time watcher great job. You have me hooked after 2 videos. Out of curiosity have you thought of getting into powder coating very easy process. I've been getting away from spray painting restores and been powder coating instead. I recommend it. Great videos

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi Grimjeeper, I would love to get into powder coating and have a media blaster but funds don't allow it at the moment. Regards Brian

  • @Madlintelf
    @Madlintelf 5 років тому +4

    Well at least you have a little campfire to roast marshmallows over, JK nice restoration I've never seen an iron like that before.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +2

      Thanks William, this is the first time I have seen one too. I love the look of it. Not sure I would like to use it daily though. Regards Brian

    • @Madlintelf
      @Madlintelf 5 років тому

      @@UniqueRestorations Completely understood but man that will look great on a shelf! Take care Brian.

  • @SarahsCookeryTips
    @SarahsCookeryTips 5 років тому +2

    Haha love the slow motion at the beginning, very good made me laugh 🤣

  • @gilvenciochaves1384
    @gilvenciochaves1384 5 років тому +1

    Boa tarde Like

  • @claverchengula4584
    @claverchengula4584 Рік тому

    Once i go Ujiji Kigoma Tanzania i see it Kerosene Iron (Taa ya Mafuta) i was like what this, How it work, i just Wondering till today i see it

  • @theropesofrenovation9352
    @theropesofrenovation9352 5 років тому +2

    Like your channel says "Unique Restorations" which can mean there won't be easy to find parts, right?? I really liked it. I've never seen one like it. Maybe one day far, far away, you'll see one just like it to get the parts .lol Great job. The WD40 chase was hilarious!!!!!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi the ropes of restoration, it is cool item with bags of character. Hopefully I will find a part for it. Regards Brian

  • @ussdiscovery6912
    @ussdiscovery6912 5 років тому +1

    Very good attempt trying to recreate the ceramic coating, finished product looks great!
    Reach out to (HAND TOOL RESCUE) He may be able to help you find the part for the valve.

  • @pghgeo816
    @pghgeo816 5 років тому +1

    Because of a chip you destroyed the porcelain!?

  • @pghgeo816
    @pghgeo816 5 років тому +2

    Coleman's model 4-A made from 1927 - 1948

  • @人間正道是滄桑-j9d
    @人間正道是滄桑-j9d 3 роки тому +1

    👍👍👍👍👍👍👍👍👍👍

  • @narimansadeghi9121
    @narimansadeghi9121 5 років тому +2

    Very nice restoration! Use gloves to protect your hands!

  • @frick566
    @frick566 5 років тому +2

    Don't apologize for the way you made that handle..guys use costly lathes and barely come out with the same result!..Great job.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Thanks for your comment Lee I appreciate it. It was an experience making that handle ha, Regards Brian

  • @phyllisbentley1374
    @phyllisbentley1374 5 років тому +2

    I liked the original enamel better but overall a good restoration!

  • @fragx7642
    @fragx7642 5 років тому +3

    Well done man, i love it and your channel growing im glad 👍Also i like edit at the begin it was a bit funny in positive way 😋

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +2

      Thanks Fragx7, glad you enjoyed it, I was just trying to add some humour to make it more enjoyable. Regards Brian

    • @hh0520
      @hh0520 5 років тому +1

      Unique Restorations - I hit like even before the intro was done...it put a smile on my face. Thank you!

  • @Djena678
    @Djena678 5 років тому

    Выглядит красиво, но, на мой взгляд, это очень пожароопасно.

  • @luisantoniomarrega1120
    @luisantoniomarrega1120 5 років тому +2

    O desenho do ferro de engomar como falam aqui no Brasil é interessante mas pra passar roupas tem que usar luva de amianto. Abraço! Rio de Janeiro Brazil

  • @albagonzalez8726
    @albagonzalez8726 5 років тому +2

    Soy nueva en su canal me quedé al mirar la cómo quedó esa plancha tengo una igualita ya que la bombita es donde lleva el agua y tengo otra plancha antigua que es de carbón de 1931 las dos son de la miss del mismo año y las conservo como nuevas ya que son una herencia de mi abuela y de mi madre soy de Colombia muchas felicitaciones acostumbro mucho a tener antigüedades siempre salgo los fines de mes a comprar ya que en Medellín Colombia hay unas casas de antigüedades tengo una chocolatera antigua que la base de abajo es de que se le echa carbón y se le hecha la panela y el chocolate y ahí mismo se cuece todo es muy antigua también es de 1931

    • @thiggy1249
      @thiggy1249 5 років тому +1

      ¡La chocolatera antigua me da hambre!

    • @albagonzalez8726
      @albagonzalez8726 5 років тому

      @@thiggy1249 Jajaja jajaja jajaja jajaja jajaja eres muy gracioso una feliz noche y gracias por responderme

    • @jcvazqueza
      @jcvazqueza 5 років тому +1

      Yo también tengo una igual y la restauré

    • @ronaldmunoz6583
      @ronaldmunoz6583 Рік тому

      yo recién conseguí una y la estoy poniendo a punto para ponerla a funcionar, pero en todos los videos que he buscado, no muestran cómo debe limpiarse la aguja y el espiral que trae dentro el generador. también soy colombiano, mas exactamente de Bogotá

  • @jeffreyking6345
    @jeffreyking6345 5 років тому +2

    Nice video at the top of the iron have a valve to pump air to add pressure to the fuel

    • @francislematt7079
      @francislematt7079 5 років тому

      yeah such pumps are often mislabelled as bicycle pumps at antique shops!

  • @briansworkshop01
    @briansworkshop01 5 років тому +2

    Fantastic just fantastic great job thanks for sharing 🍺🍺👍👍👊

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Thanks Brian, always nice to get an enthusiastic compliment. Regards Brian

  • @dr.skipkazarian5556
    @dr.skipkazarian5556 5 років тому +2

    Nice work! I'm curious to know if you do any research on these items before you begin restoration. This looks like a Coleman Kerosene fueled iron...but I only did a quick search....there are numerous similar images on-line that might help identify this little guy. Best wishes from Kauai.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi Dr Skip Kazarian, to be honest I don't do much research as I am very pushed for time. Carrying out the restoration and editing is very time consuming especially when I have a family. I would love to be able to give better information along with the restoration but it's not possible at minute. Regards Brian

    • @gforcekaras
      @gforcekaras 5 років тому +4

      These don't use kerosene but white gas. Go to www.oldcolemanparts.com/ for the parts you need for the iron, should be an easy fix as it looks like you need a new generator www.oldcolemanparts.com/product.php?productid=2799&cat=&page=2 . Also there's a great community for support for Coleman products at www.colemancollectorsforum.com/?action=allForumTopics&sort=latest. One last thing is that these need some sort of pressure to run and these originally came with an external pump. Here's an example: www.oldcolemanparts.com/product.php?productid=1103&cat=26&page=1

  • @terracethornhill
    @terracethornhill 5 років тому +1

    If you use a sanding block you will get a more perfect surface. Fingers aren't flat, so they won't make a flat surface if that's all that's supporting your paper. That's something I was taught by a professional body man. A block of wood will do, but my long board has kind of a thin foam on it to allow it to conform to curves, so maybe some thin foam tape on a block of wood would do the trick to support the paper.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Thanks Pete, I'll give that a go on my current project. Regards Brian

  • @TheStampede000
    @TheStampede000 5 років тому +1

    I like the way it was done before better, I don’t like stop motion

  • @turbo.panther
    @turbo.panther 5 років тому +1

    Well I guess there's a good reason the original handle was burnt! And while it may be disappointing that it doesn't work it probably doesn't matter all that much as there wouldn't be too many people queueing up to use it, hmm? Since you ask, the stop motion part is clever but for me, I'd rather see the work being done. Still, it's obviously up to you and I'll watch your vids regardless as I think you do a great job on your restorations. Cheers!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Turbo Panther, I suppose your right about no one using it but the personal pride kicks in. It may work one day. The stop motion won't be in every video as it's very time consuming but it does create some light hearted entertainment. My next one has no stop motion apart from credits. Thanks again. Regards Brian

  • @markschwegler1100
    @markschwegler1100 5 років тому +1

    You did an amazing job on their restoration!!!! The polished pieces and wood handle are beautiful!!! Then I see the terrible bright blue....and over the beautiful wood handle you worked so hard on!!! Wood finished handle and white base would have looked nice imo. Still beautiful work!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +2

      Thanks Mark. This was not my finest hour but every project is a learning curve. Thanks foe your comment. Regards Brian

  • @michaelwisdom8074
    @michaelwisdom8074 5 років тому +1

    My grandson wants to know how you trained it to take itself apart bit of interpretation involved.

  • @odileabriel8052
    @odileabriel8052 5 років тому +2

    Bravo de France ! Good job 😍👍😘

  • @greenhaven1722
    @greenhaven1722 4 роки тому +1

    its a good idea to use teflon tape on those threaded fittings

  • @joewalsh1054
    @joewalsh1054 5 років тому +1

    Good job. All you tool restoration guys need to stop using silver spray paint. It is not a good substitute for chrome or polished metal. Just paint it a color. You also should have stained the handle. I think it would have looked better that way. Otherwise pretty cool.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi Joe. I tried to keep the restoration as close to original as possible. The handle is sprayed blue to match what I removed and also this is now heat resistant. I think a stain would just burn quicker. The silver spray I used was not really a substitute for chrome but just a way to keep it looking original while protecting it from the heat. I think polished metal would have rusted again and choosing a different colour wouldn't have looked right. Thanks for your comment , I appreciate it. Regards Brian

  • @TheGeezzer
    @TheGeezzer 5 років тому +1

    Flat out a nice resto! I hope you make some money enough to buy yourself a nice lathe, that would be so useful for you. 💯👍💨😄

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi The Geezer, I could do with a larger place to work before a lathe, My work area is only about 1.5 square meters so I would struggle to get a lathe in. Regards Brian

  • @KvadratniyTreugolnik
    @KvadratniyTreugolnik 5 років тому +1

    *Полезный утюжек, на случай глобальной планетарной катастрофы.*

  • @schuur10
    @schuur10 5 років тому +1

    pitty it did,nt work, ........you can allways hit somebody with it !

  • @mred8002
    @mred8002 5 років тому +1

    The apparatus resembles a camp lantern, such as Coleman, as the fuel tank looks like it should be pressurized, and has a similar generator wire “throttle” that broke. Wonder if they have compatible parts?

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Mr Ed I will take a look at them and see if compatible. Regards Brian

    • @dennisp.2147
      @dennisp.2147 5 років тому

      It IS a Coleman. It uses a rotary generator similar to, but different to it's Coleman Quicklite lantern contemporaries. The generators are still available. the lever is actually a tip cleaner to clear the fuel orifice.

  • @Hitagara
    @Hitagara 5 років тому

    painting looks out of place

  • @notxarb21
    @notxarb21 5 років тому +1

    Wow! What a cool... er… hot piece! Loved the stop-motion intro, and I like your innovation in working around tools and techniques to get the desired result. I subscribed to your channel early on (I love resto videos!), and you have never failed to impress... keep up the good work! Thanks for posting!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Notxarb21, I appreciate your support and taking the time to comment. I've just started my next one and hopefully it will be ready in about 10 days. Regards Brian

  • @santanusinha7086
    @santanusinha7086 5 років тому +1

    Nice restoration man. Don't be disheartened. At least it's beautiful again. Finding replacement parts for the old timer wud be tough, but I wish u gud luck. Nice job❤

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Santanu Sinha, your right it is beautiful again and hopefully I'll find a part. Thanks for your comment. Regards Brian

  • @phillipnewton8910
    @phillipnewton8910 4 роки тому +1

    Love the stop motion photography at the beginning. It was excellent. How long did that take?

    • @UniqueRestorations
      @UniqueRestorations  4 роки тому +1

      Hi Phillip, it's been a while since I did this one but it took around two hours to move everything and about 150 photos. Regards Brian

    • @phillipnewton8910
      @phillipnewton8910 4 роки тому +1

      @@UniqueRestorations WOW! Not sure I'd have the patience for that. 😄

  • @defender_of_wonder
    @defender_of_wonder 5 років тому +1

    Brilliant and beautiful craftsmanship! The blue paint 🎨 turned out great on the unique iron!👍🏻❤️😊

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks baybeegirlz007. Your comments are appreciated. Regards Brian

  • @largavistas
    @largavistas 5 років тому +1

    Nice restoration, I like how you made the wood handle.

  • @КошмарКошмар-й2б
    @КошмарКошмар-й2б 5 років тому +1

    Hi bro 👋👋👋very good restoration 👍👍👍👍and video cool 🤝🤝🤝🤝

  • @jenniferwarwick1417
    @jenniferwarwick1417 5 років тому +2

    Great restoration

  • @jkabholat
    @jkabholat 5 років тому +1

    Thanks for the video. A nice piece of history. I like your way of editing your videos.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Jackie, I'll have some more history for you next week. Stay tuned. Regards Brian

  • @enriquelopez7050
    @enriquelopez7050 5 років тому +1

    Good restoration, nice video

  • @pistelli57
    @pistelli57 5 років тому +1

    I don't understand what was the final issue. The explanation caption is unreadable! But it was a very nice resto!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Hi Pistelli57. I rechecked my video and some reason the writing on that scene is not done properly. The lever had snapped so I couldn't regulate the gas flow which made it impossible to light. Regards Brian

    • @pistelli57
      @pistelli57 5 років тому

      @@UniqueRestorations Thanks for your reply! Hope you can fix it. Subscribed!

  • @ZenSpider40
    @ZenSpider40 5 років тому +1

    We have the same iron in our family. With a burn in exactly the same place on the handle. Design flaw? Or people being careless?

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi Zenspider40, I thinks it's probably a design flaw as the metal handle will get really hot. Thanks for your comment. Regards Brian

    • @dennisp.2147
      @dennisp.2147 5 років тому

      Its usually when there's a leak at the joint of the generator and valve.

  • @chamarystigers8731
    @chamarystigers8731 5 років тому +1

    You good job make video act

  • @arjnsdca
    @arjnsdca 5 років тому +1

    I’ve never seen an iron like that before! Camping iron? Great restoration! Loved the beginning!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Arjnsdca, I didn't know these irons existed a few months ago, it is a great piece of history. Regards Brian

  • @michaelpugh4894
    @michaelpugh4894 5 років тому +1

    Nice tear down, no hands! Nice clean up and a beautiful restoration.

  • @alexpomone
    @alexpomone 5 років тому +1

    Love this 😀

  • @thorfrun8959
    @thorfrun8959 5 років тому +1

    Well done matey, worth a subscription i think.

  • @chamarystigers8731
    @chamarystigers8731 5 років тому +1

    Gas iron ?

  • @sheroykalyanwala9258
    @sheroykalyanwala9258 5 років тому +1

    Brilliant restoration ☺ and fabulous video editing 👍

  • @tootall5559
    @tootall5559 5 років тому +1

    there is no W in rasp .. by the way, there is or was a holder that actually turns a drill into a small wood lathe. I had one years ago. makes it safer and more fun, basitallcy it just gives you a tail stock. and allows you to use regular lathe tools. As good as you are, you can make parts. You don't think everything was always machine made... you can make just about any part with a few hand tools.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Toot Tall, I would love to have better tools one day but my little workshop is so small. Regards Brian

    • @tootall5559
      @tootall5559 5 років тому +1

      @@UniqueRestorations that's exactly why I had the mini drill powered lathe when I did, very small workspace. However small it is, you can do about anything with the tools you have, tho you may need different grinder wheels and such. Look at what they managed to make when there were no such fancy tools... you have the smarts to do anything you want with very little. It's not always in the tools and such, it's in your head and hands. Look how you managed to make the handle. by the way, get a few pulleys and that grinder can power all kinds of things. With a little thinking you can make a holder that turns the grinder into a table saw, my grandfather did that when I was a kid. I think you could figure out how to make a tail stock and tool rest so you can turn a drill into a lathe..even if you mostly use wood to do it. The only piece that would have to be metal is the point that supports the piece you're turning. I know that if you put your mind to it, you could do just about anything... find a friendly scrapper that could have parts and pieces you can make into other things for your little tiny shop. I have to use my kitchen table, so I only work on small things these days, lighters and such. Did you know you can make a table saw cut things round by making a jig to do it? nothing that can't be done if you have the creativity and stubborness to stick with it. In fact, creating new tools from old junk could be an entire line of vids that would help a lot of people be able to restore rather than throw out. things.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks for advice Toot Tall, I will look into some of the ideas you suggest, hopefully time permitting I will try get some thing worked out. The Pully wheels idea sounds good. Thanks again. Regards Brian

    • @tootall5559
      @tootall5559 5 років тому +1

      @@UniqueRestorations as much as you use your grinder, you might consider finding another electric motor. Old refrigerators can be good donors, You can also turn the motor and pump into a small air compressor. You can even use the rest of the fridge as a paint booth that can be put outdoors.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      @@tootall5559 your ideas are intriguing, I will be taking a look tonight at some possible tools that can be adapted to work with my bench Grinder, I will also look at the motor set up on a fridge. Thanks for the advice, regards Brian

  • @ilikeceral3
    @ilikeceral3 4 роки тому +1

    Old irons last longer than new ones!

    • @kfl611
      @kfl611 3 роки тому

      They built them babies to last a few life times. I purchased a very heavy iron, and thought it might have been used for industry, as it weighs like 10 lbs or more, well it turns out to be a carpet iron. Go figure there was a time people ironed their carpets?!?! I swear the thing is bomb proof and will surely out last me.

  • @MoYvStarkey
    @MoYvStarkey 5 років тому +1

    The handle was impressive. Good thinking.

  • @MusicFurler
    @MusicFurler 5 років тому +1

    The Hycote paint needs to be cured by heating it in a oven to build it's heat resistance abilities.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Hi Zombie Fox Game. I cured these parts on the Barbie with the lid down just to keep the smell out of our kitchen. Regards Brian

    • @MusicFurler
      @MusicFurler 5 років тому +1

      @@UniqueRestorations wasn't doubting you, just putting it out there for anyone else. Have you got the iron on display?

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      When I get round to building a bigger workshop I hope to have some display space for them. Regards Brian

  • @adrianc1577
    @adrianc1577 5 років тому +1

    Very nice .I remember my mom had 3 of this very same type of iron when i was little

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi AC, it is a very cool item although I can't imagine it was easy to use. Regards Brian

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi AC, it is a very cool item although I can't imagine it was easy to use. Regards Brian

    • @adrianc1577
      @adrianc1577 5 років тому

      @@UniqueRestorations o i remember my mom was always exhausted after ironing tons and tons of cloths for other people that's how she raised us.doing laundry .i wish i could buy one those but here in my country we cant get them anymore .anyway great job thanks for sharing the video

  • @VintageClubRetro
    @VintageClubRetro 5 років тому +1

    me daria un poco de miedo utilizar esa plancha :O

  • @veraluciafaria8968
    @veraluciafaria8968 5 років тому

    ELE PODE ATÉ NÃO FUNCIONAR MAIS FICOU PERFEITO PELA SUA IDADE DE QUASE UM SÉCULO DE EXISTÊNCIA,PARABÉNS.

  • @hussainali9999
    @hussainali9999 5 років тому +1

    That funny in the end, thanks for sharing

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Hussain Ali, I thought it would add a bit of humour to it. Glad you liked it. Regards Brian

  • @eduardolarrymarinsilva76
    @eduardolarrymarinsilva76 5 років тому +1

    There is no audio at the beggining!

    • @UniqueRestorations
      @UniqueRestorations  5 років тому +1

      Hi kkkllleee, I know some of the audio was too low, there was such alot of footage in this one with 100s of clips I adjusted the sound too much on some of them. Regards Brian

  • @Maria-di9wb
    @Maria-di9wb 5 років тому +1

    😀👍

  • @MeanJohnDean
    @MeanJohnDean 5 років тому +1

    So it's now a lamp?

  • @idenildalopes1230
    @idenildalopes1230 3 роки тому +1

    Ficou simplesmente lindo!

  • @syedameershahshahzad6439
    @syedameershahshahzad6439 5 років тому +1

    Excellent work

  • @feisdee1
    @feisdee1 5 років тому +2

    Stop motion... interesting.

  • @walmartdog1142
    @walmartdog1142 5 років тому +1

    Would alcohol service as a fuel?

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi Walmartdog1142, It took a while for the vapor to form in the tank to produce a gas. Not sure how Alcohol would work in this case, it doesn't mention it in the manual. Regards Brian

    • @dennisp.2147
      @dennisp.2147 5 років тому

      No. This iron uses Naphtha/coleman fuel/gasoline. Alcohol has insufficient energy by volume. The orifice on the generator (the part that he broke with the lever) is sized to feed the correct volume spray into the combustion area.

  • @truckupgf
    @truckupgf 5 років тому +2

    I remember my grandmother had one..she used it for a door stop. lol

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Hi George, I suppose it is wedge shaped after all. Lol. Regards Brian

  • @danielg.vgremio83
    @danielg.vgremio83 5 років тому +1

    Cor perfeita.

  • @paulorth2251
    @paulorth2251 5 років тому +1

    That truly was unique, as are many of these restorations, but the flames in the body of the iron caught me off guard. Great work the iron, keep it up.

    • @UniqueRestorations
      @UniqueRestorations  5 років тому

      Thanks Paul, I wasn't expecting those flames either. I suppose once I find a regulator for it they should be smaller. Ha. Regards Brian

  • @tookum1
    @tookum1 5 років тому +1

    The iron turned out beautifully! You are a true artist!