The Frankenstein Deck| Fabricating and Welding projects
Вставка
- Опубліковано 27 вер 2024
- Today I am refurbishing a lawn mower deck that i have nicknamed the "Frankenstein Deck". Once you watch the video you will understand. If you like this video don't forget to catch my other videos on here. Ypu can also find more of my content on Facebook at:
/ hoodtimewelding
That's a lot of work. I did something similar for a walk behind mower for my brother and it took 3 hours. Next time I'll just buy him one. 😁
@@Eric-mr4yf a new deck this size I've heard, just the metal nothing on it, cost about $1000-1500.
trace it out with card board a nd cut new deck layers
I thought about that but you are still dealing with some different curves and depressions with one big piece. It was easier I think to piece it like I did.
@@HoodTimeWelding your probly right , it took me like 11 hours to do one of these . I used 1/8 for a little extra life span
Do the blades all balance out
I had no way to check them. What you might not have noticed and I didn't point out is the plates already on there had points where the bolts holding the rings in running through them. So this was part of the reason I didn't remove them. They were holding the pulleys in place.