Nice video, I am using Freestyle Libre US 14days with Ambrosia Blucon over 8 months now, it converts Libre sensor into a full CGM and you will be able to see glucose readings every 5 minutes on phone and watch without scanning the Libre sensor. Now I don't need to scan the Libre sensor and gets reading every 5 minutes on my phone.
I am a patient of type 2 diabetes and using a Libre1 sensor with Nightrider BluCon to get real-time and continuous glucose monitor. Also the app updates me which food impacts on my sugar values.
I monitor my blood glucose values through Freestyle libre sensor and Ambrosia Blucon device which updates me every time when my glucose values go up and down, which really helps me a lot every time.
Thank you very much for this explanation... I have a question: How can I connect the One Call glucose testing device to the computer to transfer the information on the device to the computer? Is there a video that explains this thing... Thank you, and I wish you good luck and success always.
How do I'm know that my on call has a problem? My one been more specific check that test stars, but it don't recognize my blood any more and not only that because the " blood of test" which comes with on call also doesn't work
Hi i use On call plus glucose monitoring system, i get 12H error on my display and its not moving to next screen even after pressings M or S key. How to fix this problem. Kindly suggest
In my on call plus after conducting the test, result is appearing in mg/dl but the test result is incorrect because it showing very less values every time in every person i.e 34 mg/dl , 24 mg/dl. This is a gross error in result. How to fix it ?
I performed the quality control test well, it gave me a reading. But when I tried to do the actual sugars test, the machine first read pl then now I can't switch it on, what could be the problem? I just bought a new battery yesterday
Check on how you place the test strip. Just the tip should get into contact with the blood sample. Watch the video at that exact time when the test strip is used
It was Doctor Oseiwe who cured me from Diabetes, you can also get in touch with him on UA-cam channel Doctor Oseiwe, if you need help and be cured completely🇬🇧🇬🇧
Nice video, I am using Freestyle Libre US 14days with Ambrosia Blucon over 8 months now, it converts Libre sensor into a full CGM and you will be able to see glucose readings every 5 minutes on phone and watch without scanning the Libre sensor. Now I don't need to scan the Libre sensor and gets reading every 5 minutes on my phone.
Thank You so much , This helped me ❤❤
I am a patient of type 2 diabetes and using a Libre1 sensor with Nightrider BluCon to get real-time and continuous glucose monitor. Also the app updates me which food impacts on my sugar values.
Thank you so much for this video. It makes a whole lot of difference. God bless you
Very well explained.
Thank you so so much, for making this video, for making this device more easier to understand more easier to use.. its a great help. 👏👏👍
Thanks for making video for all of us
Thanks for the explanation 😀😀
Thanks for your video. It was helpful for us.
Very useful. Thanks
Thank you so much for the video. It was very helpful
trashed the user manual , thanks for the video tutorial !
😂😂😂
🤣🤣🤣
👍👍👍
Thanks for your video
Wow that's awesome 😊
thanks for ur assistance
Thanks for the help
Thanks for the insight
Well explained 😍
When performing a quality test I got a reading of 109 !!!
I monitor my blood glucose values through Freestyle libre sensor and Ambrosia Blucon device which updates me every time when my glucose values go up and down, which really helps me a lot every time.
My son is using Nightrider, which always helps us to get alarms, readings update. Life changing product.
Thank you very much for this explanation... I have a question: How can I connect the One Call glucose testing device to the computer to transfer the information on the device to the computer? Is there a video that explains this thing... Thank you, and I wish you good luck and success always.
How do I'm know that my on call has a problem? My one been more specific check that test stars, but it don't recognize my blood any more and not only that because the " blood of test" which comes with on call also doesn't work
Merci 👍👍
Is that possible to use oncall exra strip with oncall plus device?
2:27 what happened if the quality control test falls into range CTRL #2.
Thank you sir! I doctor gave me this on call plus meter
Thank you
After checking one person blood sugar result to check d another person blood sugar wt setting should be done
Can I use g113-119 strip in g113-117?
What does 1n text in the upper right corner mean
How to change year.. I wrongly set 2024...pls help me?
thank you
very helpful
Is code important, is code effect the result
That was so helpful, thanks a lot
Hi
i use On call plus glucose monitoring system, i get 12H error on my display and its not moving to next screen even after pressings M or S key.
How to fix this problem. Kindly suggest
In my on call plus after conducting the test, result is appearing in mg/dl but the test result is incorrect because it showing very less values every time in every person i.e 34 mg/dl , 24 mg/dl. This is a gross error in result. How to fix it ?
I don't see the outside code in the machine, what to do?
What is mean of CTRL 0 CTRL 1 nd CTRL 2?
How can I change mmol for mg/dl???
When performing the test,1st result got 114 ,not same cntrl 0,then what to do
My control test went fine but the actual test didnt even give me a reading
where can i buy extra strips I can't find code 947 strips
What happen when the control solution does not match the glucometer
Thank You So Much
What is the use of hour mode? Which one should I choose 12h or 24h?
it is hour mode. İf you choice 24h you see time as 23:30 at 11:00 PM.
what is E-3?
My machine doesn't show the ctrl ranges what could be the problem
When it reads HI or E what does that mean??
Quality control chequing time E-4 Showing wath is the problum
Meu aparelho não quer mais funcionar nem trocando a bateria,o que fazer 😱😭😭
My machine date is 2023 how can we set it on 2019 as the year is not reduce while setting date
Am facing same problems in my device too
Super
اذا كانت الابره قديمه الصنع يعمل الجهاز ام لا
today I chack my blood sugar from on call plus machin at a time three times. but reading is came 3.5; 8.6; and 8.9 . why the reading is like that
because made in china 😀
Good knowledge
how can i find this product please.. what should i do now?
But why did i receive my oncall .. device with user manual in arabic
Why for me shows 114
The chip doesen't work it's in like in the video, and when I introduce a strip, It doesen'T reconizes it
Yaa same prblm for me too
E-0 issuse. Anyone have any idea ?
How can I change to mg/dl unit
E-3,E-4 means
Thank uh
Whats the meaning of E-4
How does one set the meter from mg/dL to mmol/Lt plz?
I just bought this test kit last week and was asked which version of the device I wanted.
That suggests that you cannot change the reading.
In my Glucometer it shows E - 6
What should I do when it displays E-6 on the screen
That is battary law
How do I change the results unit of measure to mg/dL from mmol/L?
did you ever figure this out ????
@@samirawarsame6482 unfortunately not. I think this doesn't support it.
Just Multiply the result by 18
example: 5.9 x 18 = 106 mg/dL
👍
@@lilygen913 thank youuuu
I missed the code chip. Whats the solution?
Nice
My machine is not switching on. Tried a new battery too. Still not working
Defective machine
How to change unit to mmol/l
I performed the quality control test well, it gave me a reading. But when I tried to do the actual sugars test, the machine first read pl then now I can't switch it on, what could be the problem? I just bought a new battery yesterday
U have which code of test strp??
same thing here,its frustrating,always goes back to date setting 😤😤😤😤
5.9 means
Je veux la version française de la vidéo. Merci
. اذا كانت ااشرائح قديمه يعمل الجهاز
اذا عطل الجهاز ما يعطي أرقام مضبوطه ماذا نعمل
Hello, how much do you have on call extra glucometer strips? Can I buy strips from you?
Available with Amazon
Can I use the same needle with two patients ?
You can't
No
Geez.
mines chinese...this helped
Whenever i insert strip it says E-4 error
Check on how you place the test strip. Just the tip should get into contact with the blood sample.
Watch the video at that exact time when the test strip is used
Oops I don't wash my hands, I don't wipe with alcohol swab nor do I wipe off the first droplet...
On call plus E4 error problem .
Model- On Call Plus
Hum 2year s use kr rhe h
Blood Glucose Meters | 4in1 Glanber | Glucose, cholesterol, hemoglobin, uric
E-6 help
Qual a validade do aparelho ou como fazer manutenção?
What’s the meaning of Error-8?
Wrong year has been selected how to correct it
It was Doctor Oseiwe who cured me from Diabetes, you can also get in touch with him on UA-cam channel Doctor Oseiwe, if you need help and be cured completely🇬🇧🇬🇧
E 6
???
price
قيساته غير دقيقه تزيد او تنقص من ٥٠ - ١٥٠... التحليل من الوريد افضل
77 mg/dL
In display E 6
Please give the solution
Plz help e6 is disply
03424874393 in pakistan
Help me what should I have to do E6 is displayed not working plz whatts ap me 03424874393 pakistan
E-6 ERROR PLZ WHAT TO DO
Low battery it's
HI is high while LO is low
E 7 what??
Please write the information in Arabic.
Thanks.
Price send