I was never mathematically or mechanically inclined but I applied at TEAM industries in Minnesota as a machinist. I assumed it was just labor, lifting and moving parts, but they failed to tell me I needed a lot of these skills to ensure I was making quality parts. These videos really put me at ease, thank you so much
@@thebelieversvoices3461 Praying for Trump? Did you see the witches and warlock posts against him, and later the Woa,,, stop!! It's not working?? Those Re-directing of the curses are working marvelously.. Ha..Ha... :)
im starting CNC at Texas State Trade College soon and this is a super insightful, no nonsense introduction video. Has me very excited and slightly relieved that I chose this trade. Can’t wait to watch the rest! Hopefully you’re doing well. Thanks again
Just watching the first few videos have eased my anxiety and actually helped me feel excited about my new opportunity. Lately I’ve been wondering if I got over my head in this new roll. I haven’t started yet, but when I do, I will be a bit more confident. Thank you so much.
Glad I found your channel, starting school next month in South Carolina and am kind of declined with math so this is very useful for a head start. I also lived in Wisconsin for 5 years in Appleton so you’re easy to listen to haha
Hello, I am a researcher in Iran and I have patents and articles in various fields, and I really enjoyed your teaching method, simple and with deep concepts that are the basis of a correct view in machining.
Thank you very much for doing this. I have been a manual machinist for 32 years , can run a prototrak cnc Conversational, but never did G code learning G from you thank very much
Great video Matt, man when you got to the end and started talking school learning and common sense, I almost turned into a cheerleader,, I have seen so much in my years, and the farm and hay wow, I have been there, 100 plus cows milked twice a day and going to school, but now you are very lucky if the kids today can even do fractions, much less decimals, and common sense, is there such a thing any more, like you I learned on the farm welding and building everything you needed,, so I consider myself way ahead of the game, I have subed, and going to start on the vids you have on your page, I am kind of old to be learning this but I want to do something since I am retired,, this sucks just sitting around,,, I have lathe and several other tools, but not cnc controlled, have thought many times about putting cnc on them.. thanks for the video Jim
I just became a CNC Machinist. They have me working on a Lathe right now. My dads side of the fam are all Machinists, well managers of their companies now. I went to school for CNC and CAD. I’m only on my first week of work, but definitely enjoy the learning experience! The basic tools I work with are calipers, Pins to measure tolerances, micrometer and a comparator. The fun part is actually learning the programming to adjust the machine to make that part right! You’re right. It’s not hard. I have Dyslexia, ADD, and I am not the greatest at math. The math is not hard either.
Always remember to repent of your sins (sin is transgression of YAHUAH’S LAW: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy) And Have Belief On YAHUSHA HAMASHYACH. HE Died and Rose three days later so that you can be forgiven of your sins! HE Loves you! Come to HIM!🙂
I was never mathematically or mechanically inclined but I applied at TEAM industries in Minnesota as a machinist. I assumed it was just labor, lifting and moving parts, but they failed to tell me I needed a lot of these skills to ensure I was making quality parts. These videos really put me at ease, thank you so much
Cool, this guy would have been a great shop teacher. Wish I had his instructions when I was young. Good luck with your progress!
Thank you, I need an online menthor and I found you Sir!
Hit me up
you are the MAN!
Please please come back and continue to make educational videos
I will try, I am so busy with a lot of Bible stuff right now
@@thebelieversvoices3461Would you say any of the content in these videos is outdated?
@@fadedchicken Considering he is teaching the basics, I would say No... Everything should be relevant...
@@thebelieversvoices3461 Praying for Trump? Did you see the witches and warlock posts against him, and later the Woa,,, stop!! It's not working?? Those Re-directing of the curses are working marvelously.. Ha..Ha... :)
I start night classes for my haas and osha certifications. This video is getting me even more excited
This video oddly relaxed my anxiety. I’m far more receptive. I’m ready to learn calmly now .😌 thank you
im starting CNC at Texas State Trade College soon and this is a super insightful, no nonsense introduction video. Has me very excited and slightly relieved that I chose this trade. Can’t wait to watch the rest! Hopefully you’re doing well. Thanks again
You have a kool down-to-earth way of talking and that says a lot of good things about you my man.
Just watching the first few videos have eased my anxiety and actually helped me feel excited about my new opportunity. Lately I’ve been wondering if I got over my head in this new roll. I haven’t started yet, but when I do, I will be a bit more confident. Thank you so much.
Did you start yet
Glad I found your channel, starting school next month in South Carolina and am kind of declined with math so this is very useful for a head start. I also lived in Wisconsin for 5 years in Appleton so you’re easy to listen to haha
( school for cnc programming and operations)
Great video
Hello, I am a researcher in Iran and I have patents and articles in various fields, and I really enjoyed your teaching method, simple and with deep concepts that are the basis of a correct view in machining.
Thank you very much for doing this. I have been a manual machinist for 32 years , can run a prototrak cnc Conversational, but never did G code learning G from you thank very much
I’m buying you a beer when I get my first machining job you are an awesome teacher god bless you❤
Great video Matt, man when you got to the end and started talking school learning and common sense, I almost turned into a cheerleader,, I have seen so much in my years, and the farm and hay wow, I have been there, 100 plus cows milked twice a day and going to school, but now you are very lucky if the kids today can even do fractions, much less decimals, and common sense, is there such a thing any more, like you I learned on the farm welding and building everything you needed,, so I consider myself way ahead of the game, I have subed, and going to start on the vids you have on your page, I am kind of old to be learning this but I want to do something since I am retired,, this sucks just sitting around,,, I have lathe and several other tools, but not cnc controlled, have thought many times about putting cnc on them.. thanks for the video Jim
I'm sold. Do I need a ged
Awesomeness 💯❤👍
I just became a CNC Machinist. They have me working on a Lathe right now. My dads side of the fam are all Machinists, well managers of their companies now. I went to school for CNC and CAD. I’m only on my first week of work, but definitely enjoy the learning experience!
The basic tools I work with are calipers, Pins to measure tolerances, micrometer and a comparator. The fun part is actually learning the programming to adjust the machine to make that part right!
You’re right. It’s not hard. I have Dyslexia, ADD, and I am not the greatest at math. The math is not hard either.
CNC lathes are cool, I want to make one for home shop use 😁
Wished you lived around the corner.. I would finish all of these classes and come work for you for free to just be able to take the basics further..
I'm so excited! 🙂
I'm going into that skill. I appreciate all the knowledge. Oh yea new subscribers. 😎
Why stopped uploading more videos?? These are some of the best explained i watched
Very busy but I will try to put more on
Yah.. I agree. This guy is great! I hope he continues...
he explains so simply,we are eager for his vids,a true expert he is
Are you interested in quoting jobs for aerospace aircrafts? Are you in the Los Angeles Area?
please make some more videos, you have made me love machining, loved the joke on finite element maths😁
Any videos on reading programs?
Been doing this for 10 years and can operate and run parts just missing the programming part
Dont tyink youre wrong about 100k a year... i think you hit it right on the nail.
Hello maybe we can collab sometime
Is the environment, fucking hot. I come from a hot factory
👍🤣
Sir is there any vacancy of any cnc operators, kindly give me your contact details. Thankyou
Always remember to repent of your sins (sin is transgression of YAHUAH’S LAW: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy) And Have Belief On YAHUSHA HAMASHYACH. HE Died and Rose three days later so that you can be forgiven of your sins!
HE Loves you! Come to HIM!🙂
🙏🏼💦