How to wire up an intercom phone system distribution point (DP)
Вставка
- Опубліковано 26 лип 2023
- • How to connect a telep... How to wire up a Telephone distribution point for a telephone system.
The video shows the colour coding for each cable to be placed on the Telephone distribution point.
How to punch down cables on the telephone cables on the telephone distribution point.
How to run cables from the PABX switch to the telephone distribution point.
How to run cables from the telephone distribution point to the telephone sockets.
How to terminate telephone cables using RJ-11 plugs
• How to terminate telep...
How to wire up a Telephone Socket or a telephone socket
• How to connect a telep... - Наука та технологія
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
thankyou , instructions are very clear ! Godbless!
Thank you, God bless you too
thanks
Most welcome, you can find more of my videos at www.youtube.com/@tech_inside_out
CLEAR
Am glad it was clear. You can find more of my videos at www.youtube.com?@tech_inside_out
Super
Thanks
Short and clear and well understood ..Note:care should be taken when punching down..the blade should be on the side of the excess wire to be cut off,!Is it right,Sir?😅
Absolutely. That's right
👍👍👍👍👍👍
Thank you
thank you so much sir...my question: working on a single building of over 25rooms, is it necessary to use a DB?
is distance a barrier for direct connection from PABX to the socket?
The DP would not be necessary in a single building.
Distance is not a barrier at all, you can do the direct connection.
Please, can I use a CAT 6 cable ?
I can't find some of the CAT 5e cable..
Yes, you can.
Hi can i use two or more DP?
Lets say two storeys, and a detached security room. first floor cat6 are 4 in number, So i punch them down into distribution box and pick from DP with Multicore cable to the other security building, and punch the multicore it into DP and lastly take it from DP with cat6 and crimp into PBX?
Yes, you can use many DPs as you have done. You are doing a perfect connection.
@@Tech_Inside_Out thank u so much for your class.
Please does it mean you can use the DP to connect many telephones on Extension jack? That is if you have like say 100 telephones, can you use 16ext jack pbx with DP to connect them all?
No, that is not the case. I will try and do a comprehensive explanation on that in a video. It won't be the next video on the channel, but it will come soon.
@Tech_Inside_Out it's been 6 months please any idea when that video coming?
@@PlentyGistTVGH Would have loved to learn from that video
@@Tech_Inside_Out yes please we’re waiting for it
Sir. Let’s say i want to use 1 cat6 cable for 4 rooms next to each other. Single line can I use blue white blue for 1, orange white orange for 2, the third room green white green and the last 4th room brown white brown. ?
Do they all go to the 2 and 3 pins in the rj11 connector?
Pls lastly 😅 from the Dp box to pbx, if I punch down from the first line on Dp
orange white orange,blue white blue, green white green, brown white brown. Will I still be able to pick it same way from dp to rj11 to pbx?
Or you say I’m reimagining too much 😊
1. Provided you would be able to separate all the cable pairs in the Cat 6 for the four rooms, it would work.
2. Yes, pin 2&3
3. You should be able to pick it from the DP and ensure you do your matching properly
@@Tech_Inside_Out I’m going to experiment the punch down to dp and same as I asked, see if it works per my wiring before I actually work on it. I’ll revert. Thanks so much
Sir, I have a question.
Is it compulsory to include a telephone distribution point (krone)? Can't it be done directly.
The krone is used where you need to extend extensions to a distant location eg, another building that is having many extensions. In such a case you will use a multi pair cable and take to that Krone and from the krone you can distribute to extensions.
So yes, you can wire your lines directly.
@@Tech_Inside_Out thank you very much sir. You're a blessing!
@@flatearthreality I thank God
@@Tech_Inside_Outwhat's a multi pair cable sir?
Quick question Sir.
Please Why the need for a Distribution Point if you can wire up straight from the PABX to the keystone jack?
The DP is mostly used when transferring the pbx feed to a location through multi pair cables. Eg when extending the pbx to a different building, you would need just a single multi pair cable terminated onto a dp and then pick your extensions from the DP
@@Tech_Inside_Out Oh okay that make sense. Thanks for the reply
@@iambenqazy You are welcome
@@Tech_Inside_OutIn a situation you are just working in a building, no need for the dp?
@@Tech_Inside_OutI'm more lost 😢
sir; i do have a question how many telephone lines comes from telecom service provider and how does voice call of internal and external call routing is made ..
is that possible to use only for internal small office voice call without connecting to telecom service provider
You can take as many phone lines as possible from the telephone company. Each phone line comes as a 2 wire line into your premise.
At the distribution box,why is that the cables didn't follow up accordingly like solid blue ,strip blue and solid yellow,strip yellow? Instead of solid yellow, strip blue and solid blue,strip yellow u did?
Telephone system wiring has a code for the wiring which must be followed. It is a standard to enable anyone other than the one that installed the system to be able to easily trace faults in a telephone system.
Why should I use a distribution point(DP) when I can connect my telephone system without it?. How does it help me.?
I will explain in a video i will publish soon
do you really need a distribution point? I have wires set up on each office and central point where all the wires meet. The central point will all go into the switch and the office part will go into the wall sockets. that will work right?
Yes, the setup you described will work. The distribution point works in instances where you have two or more buildings sharing thesame PBX machine. At each building, there will be need for a Distribution point and use a multi core cable from the pbx switch to the DP.
@@Tech_Inside_Outso how do you set up the phone numbers for the individual rooms in the new building or do they just share the same number?
I've connect the same as you've shown but it didn't work may I know the rea sons
I suspect the punching didn't go well, please re-punch down the cables.
Hi our hotel phone was working normal, after light outage and return, when i click on the botton number ta call someone outside of the hotel it doesn't work, and it gave me on the screen " button without function" please can help me fix it
Please check your outgoing, CO line. It might be faulty.
Why do u need the DP when you can actually wire up from the face plate to the pbx straight? How does the dp help?
Lets take for instance where you are to install pbx in two different structures on one main pbx switch.
You will require a multi core cable coming to a DP from where you will distribute the phone extensions to the various locations in that structure.
In such an instance. running single cables to each extension will not be needed, all you need is a multi pair cable run to a DP.
@Tech_Inside_Out thank you. The dp could be exampled as a poe switch which is like a bridge from cameras to nvr assuming that. Just that it confuses when I hear multi core cables and single cables.
@PlentyGistTVGH Multi core cables come as one main cable with multiple pairs of conductors. Eg. You can have a 200 pair multi core cable that you can run so that it can be used to transfer as many as 100 telephone lines to a dp rather than running 100 Cat 5 or 6 cables to different phone locations. It is from the DP that you need to use the Cat 5 or 6.
@Tech_Inside_Out wow this is very insightful. Just yesterday we were to continue an abandoned cctv and telephone line installation, and I saw a bigger cable than a cat6 which had about 8pairs in one conductor and I was totally lost. As previous installer didn't finish running telephone lines but fixed face plates to the wall. Thank u very much.
@PlentyGistTVGH Yes, that 8 pair cable is an example of a multi core cable. As I mentioned, you can get bigger and larger pairs depending on your project type.
Must it always be orange and blue?
It is the blue pair and the green pair. It is an internationally accepted standard
@@Tech_Inside_Out ok sir
Cant i just run the cable to the socket directly without the dp?
You can do direct cabling into the sockets but in an installation where there are different buildings connected to one pbx switch, you would need the dp in each building from where you would distribute to the various sockets in that building
@@Tech_Inside_Out noted sir
@@Tech_Inside_Out
I'm surveying an abandoned job where the main building has cat6 are all run into the walls
with the traditional RBG and yellow wire telephone socket fitted. A pair of multi core cables in a junction box.
In The other building,a security room has pair of multicore cables in the junction box as well,and some cat6 too. My Question.How many distribution point is needed at each building, or only a single DP would work as you demonstrated in this video?
Afro engineering
.
I see as if its not necessary.
There are applications of the DP.