Installing WILWOOD Disc Brakes!

Поділитися
Вставка
  • Опубліковано 8 січ 2025

КОМЕНТАРІ • 9

  • @davidwesselsr7316
    @davidwesselsr7316 5 місяців тому

    Looking Great

  • @malcolmhammond2135
    @malcolmhammond2135 8 місяців тому

    It’s looking great Cody. I’m assuming you cleaned any residue off the rotors with brake clean or acetone.

    • @CodyBuilds
      @CodyBuilds  8 місяців тому +1

      No I didn’t but it was intentional and for a very specific reason. I’m anticipating at least another several months before I can actually drive this truck. The chassis is going into storage until the body work is done and I didn’t want the rotors rusting on me. When I plumb the brakes I’ll clean everything up.

    • @malcolmhammond2135
      @malcolmhammond2135 8 місяців тому

      Makes sense.

  • @sanchezcar42
    @sanchezcar42 7 місяців тому

    Did the qa1 kit come with the castle nut for the spindle hub or did the willwood break kit

    • @CodyBuilds
      @CodyBuilds  7 місяців тому

      Neither! I had to pick the castle nuts up separately from both kits. They definitely didn’t come with the Wilwood kit. If they came with the QA1 kit I lost them during assembly but I really don’t think I did. I organized all the hardware before installation. They are 3/4-20 inch thread spindle nuts. Should be pretty widely available at your local parts store.

  • @corydriver7634
    @corydriver7634 8 місяців тому

    🥴Snapping that bit right off the get go I’d of said a few bad words.

    • @CodyBuilds
      @CodyBuilds  8 місяців тому

      I edited those out! Have to keep it clean for the kids 😂

  • @CarolynPike-j6l
    @CarolynPike-j6l 8 місяців тому

    nooooooo screw willeood brakes
    GET THEMHOTBOY BRAKES FROM
    STRANGE BRAKES AND REAR ENDS.
    USE THE hot boy BRAKES and calipers smarting up.
    omg garage hsvidoes scca
    STRANGwmmmmmmmF YOU WANT TO STOP AND YOU WAIT