How does this compare with the TRD intake-cost, sound, hp, mileage? Last, does adding an intake affect anything else like sensor or computer function readouts? Great job!
This is waaaaaaay better than the trd intakes or filters. Trd still keeps it somewhat stock with minimal gain. There are a few like the 2j intake that sets off censors but from everyone I've read about and my own personal use of this particular intake it doesn't set off any lights. It runs amazing and sounds great!
I don’t understand how the air filter is placed it’s going to be in taking any are effectively? I’m considering to buy this but also making some sort of air flow duct from the oem intake system
Good walkthrough, but question; wouldn't having the filter exposed (vs having the filter nestled in some kind of airbox) allow it to pull in the warm air circulating around the engine bay, thus kind of defeating the purpose of being a CAI?
That's what the heat shield is for. An "airbox" isn't necessarily the best thing for cold air either. It's all about where it's mounted and where the air is collected. This one in particular is fine since the heat shield blocks most of that hot engine air.
Air intake temps are way hotter even with a heat shield. A stock air box does way more insulating than an open filter. I ran one for 2 years with a monitor on the temps and it was always 25-40 degrees hotter. I went back to stock and it was much cooler.
I asked this before I installed mine and was told by the dealer that it would void it for anything related to air intake (so, yes, ultimately). This is easy enough to install/uninstall that if you don't do your own maintenance you can just take it off and return it to factory for maintenance and then replace it once done.
No. Only if something gets damaged and they can prove that the modified part was what caused it. Overall having this on there doesn't void it unless something gets damaged that's caused by this particular part.
Just put the trd filter in place of the stock filter. The trd filter allows for more air flow and is basically the same as adding a CAI. In case you wanted the filter look up info TOYOTA PTR03-1C161
You could just reinstall the stock cold air intake when you bring it back in for warranty work. It’s not like you did an Ecu flash on the car where the dealership techs can see you modified it.
@Thor Odin son hahaha damn dude. I have a 2019 corolla hatchback. Im thinking about doing the trd cai. Also my friend said id get better gas mileage with cai. I thought it would get worse gas mileage?
How freaking lazy or dumb do you need to be to pay someone to install this intake? Make sure you charge him the extra labor for the removal and reinstall of the dealership add-on, flux capacitor. 😅
Thanks for this! It made me confirm I wanted this intake before I even bought the car xD
Car is looking good and sounds good too. Thanks for sharing.
Thanks! Make sure you turn the bell on for more notifications!
Thanks God this video you done I did it in my corolla 2020...exactly same...thanks Luirros
ahhh thanks sir! hope you have a great week thanks for the support turn the bell on for future videos!
How does this compare with the TRD intake-cost, sound, hp, mileage? Last, does adding an intake affect anything else like sensor or computer function readouts? Great job!
I added the red filter to mine and it breathes a lot better. I can feel the difference
This is waaaaaaay better than the trd intakes or filters. Trd still keeps it somewhat stock with minimal gain. There are a few like the 2j intake that sets off censors but from everyone I've read about and my own personal use of this particular intake it doesn't set off any lights. It runs amazing and sounds great!
@@joseph1541 where do you buy it?
The TRD intake is more of a cosmetic mod. It’s virtually identical to the stock intake. It just has a logo on it.
Hi when i try to remove the screw of the bracket of crank case breather , i accidentally strip the screw how can i get it out
I don’t understand how the air filter is placed it’s going to be in taking any are effectively? I’m considering to buy this but also making some sort of air flow duct from the oem intake system
Damn I was trying to get the black but I was impatient and got the silver cuz the black was out of stock everywhere I looked
Ernie Beltran shoulda messaged us
@@Speedindustry I got mine last Aug... about a week after I got the car
Do you guys ship to Australia?
Yes we do send us a email help@speedindustry.com we can get you a proper quote for all items you need shipped! Thanks for watching!
Will this for a 2021 Hatchback?
Hi! Will this cold air intake fit a Corolla Sedan with 1.6V engine displacement? Please advise.
Is that sticker for sale anywhere? the SlowYota
nope that is the customers car club or something of the sort.
Good walkthrough, but question; wouldn't having the filter exposed (vs having the filter nestled in some kind of airbox) allow it to pull in the warm air circulating around the engine bay, thus kind of defeating the purpose of being a CAI?
That's what the heat shield is for. An "airbox" isn't necessarily the best thing for cold air either. It's all about where it's mounted and where the air is collected. This one in particular is fine since the heat shield blocks most of that hot engine air.
@@masterlogray True, it does sit and point downwards enough that it's not an issue. Love the low grumble it gives too ;)
@@GrizDrummer25 oh it sounds so good. That deep throaty sound is just awesome.
Air intake temps are way hotter even with a heat shield. A stock air box does way more insulating than an open filter. I ran one for 2 years with a monitor on the temps and it was always 25-40 degrees hotter. I went back to stock and it was much cooler.
Yo I need help I did this to my 2020 1.8 and my check engine light came on
Sound difference from the intake or is it a silent one?
There's sound clips in the video..... Why didn't you watch the whole way thru? haha Thanks! Make sure you are subscribed! a bunch more content!
SPEED INDUSTRY you May have misunderstood. As I’m sure you know some intakes only have a unique sound when they’re in gear and under load. Like k&n’s
@@basket1099 it breathes while sitting it makes sound on and off throttle
@@Speedindustry is it supposed to breathe when u shift. i cant tell if i have loose couplers or not i’ve had it in my car for a few months now
What you do to the air vent on the front?
Keep it or remove it up to you.Make sure you have the bell on so you are notified when theres a video uploaded.
Will this fit corolla 2020 sedan?
It should since they have the same engine bay
Yes sir
Check my video out I got my sedan a catback borla with injen intake
intake should fit with no issues. Make sure you are subscribed! a bunch more content!
bryan contreras would they deliver to california? Thanks
How does that compare to the TRD intake?
Don't waste your money on the trd intakes. Mostly just cosmetic with minimal gain.
wait this will fit in my 2020 se hatch right
Yup
just ordered mine but i have to wait a few months now😭
wait why?
i just ordered mine too but it said it’ll come in 5 days is that not true
Will installing this void my warranty ???
I asked this before I installed mine and was told by the dealer that it would void it for anything related to air intake (so, yes, ultimately). This is easy enough to install/uninstall that if you don't do your own maintenance you can just take it off and return it to factory for maintenance and then replace it once done.
No. Only if something gets damaged and they can prove that the modified part was what caused it. Overall having this on there doesn't void it unless something gets damaged that's caused by this particular part.
Any CEL codes?
TFiPW none that we seen
Is Any performance improved with this intake? How does it compare to Toyota’s TRD intake ?
we have not compaired and injens website will show claimed power gains.
@@Speedindustry neither will trd haha
anybody know if this was done on a manual or auto transmission?
Will this fit a 2021 Toyota Corolla Se Hatchback?
yes
I have to wait so i dont brake the warranty :/
Just put the trd filter in place of the stock filter. The trd filter allows for more air flow and is basically the same as adding a CAI. In case you wanted the filter look up info TOYOTA PTR03-1C161
You could just reinstall the stock cold air intake when you bring it back in for warranty work. It’s not like you did an Ecu flash on the car where the dealership techs can see you modified it.
@Thor Odin son hahaha damn dude. I have a 2019 corolla hatchback. Im thinking about doing the trd cai. Also my friend said id get better gas mileage with cai. I thought it would get worse gas mileage?
@@8djd trd intake is mostly cosmetic. Don't waste your money.
@@masterlogray thanks man I didnt get it
How freaking lazy or dumb do you need to be to pay someone to install this intake? Make sure you charge him the extra labor for the removal and reinstall of the dealership add-on, flux capacitor. 😅
That zip tie instantly turned me away from this one sorry but nah lol
I have the AEM intake on mine and it’s dopeboyfreshbruh#
Shout out to @that_frostie_210
will this fit a 2020 Corolla HB?
yea
Will this fit a 2022 HB ?