Great build, very impressive! You have really picked the hobby up quick... Love that you are able to cut your own frames with Carbon Fiber. I would love to get one of those setups. Nice build and nice flying!
I been follow you since my LDO V0.1 build and I really like the FPV content. Printed some drones a couple of years ago but stopped flying after our move to Spain and the new EU regulations. Will taket the A1/A3 +A2 in January and start flying again.
I find these tiny quads interesting but I like the other end of the scale. I'm considering a 7" long-range quad and will probably build a 10" octo next spring to do some lift tests.
Hey Nero, I noticed that when you had the 3d gyro model up on BF that it was twitching a lot. That can be a sign of a bad gyro. If you can, set your quad down, and while connected to BF and having your quad staying still, if the model is twitching, you may want to look into getting replacment fc. Love to see other people coming from 3d printing into fpv, because thats what I did.
Change your camera to PAL mode if it supports it, you will get a much better image. Some people obsess over latency and use NTSC because its 60Hz refresh vs 50Hz for PAL, but I suspect it will make zero difference.
@@CanuckCreator I saw them in a few of your vids and stream, but today I saw it’s cool as hell. Too bad they’re coming in March. I’ll forget and it’ll be a birthday present 😂
excellent work only you have made small drone 2" I have been looking for it for some time can you share the file CNC cut carbon fiber to create me one greetings
It really depends on what your looking to get You can get cheap all you need to fly packages for like 2-300 but usually they come with a headset/controller you would be replacing quickly if you stick with it budgeting 3-500 and getting some good googles/transmitter/charger/quad/batteries to start is probably a better idea (i use a used set of DJI v1 goggles with analog adapter and a taranis x-lite with elrs module for reference)
they finally have these in stock
Welcome to the FPV life 🤗
I love that you do FPV now, my YT time was always like 50 50 between you and bardwell.
Great build, very impressive! You have really picked the hobby up quick... Love that you are able to cut your own frames with Carbon Fiber. I would love to get one of those setups. Nice build and nice flying!
Omg crossover episode
Great video, I'm getting the itch to build an FPV drone, I may have to make a purchase soon.
Do it, it's so fun and a good use for 3d printing!
Nice build.
welcome to the Odonata fanbase!
Amazing! This is so cool man, thanks for sharing
good 4 U nero breath! looks fun! good luck..
I been follow you since my LDO V0.1 build and I really like the FPV content. Printed some drones a couple of years ago but stopped flying after our move to Spain and the new EU regulations. Will taket the A1/A3 +A2 in January and start flying again.
ExpressLRS on it, great choice! 😃
lovely video lets get 3d printed frame on the go
soon
I find these tiny quads interesting but I like the other end of the scale. I'm considering a 7" long-range quad and will probably build a 10" octo next spring to do some lift tests.
Love it! 🙌
Hey Nero, I noticed that when you had the 3d gyro model up on BF that it was twitching a lot. That can be a sign of a bad gyro. If you can, set your quad down, and while connected to BF and having your quad staying still, if the model is twitching, you may want to look into getting replacment fc. Love to see other people coming from 3d printing into fpv, because thats what I did.
Gyro is fine, i was holding it the while filming thats why it was kinda flipping out, its rock steady when sitting on the table
@@CanuckCreator Ok, I was just asking in case something was awry. Thanks for responding.
Love it
Change your camera to PAL mode if it supports it, you will get a much better image. Some people obsess over latency and use NTSC because its 60Hz refresh vs 50Hz for PAL, but I suspect it will make zero difference.
Yup, I run PAL when the cameras support it
I just preorder an Omnifixo 😂😂
They are awesome
I did a few days ago too.
@@CanuckCreator I saw them in a few of your vids and stream, but today I saw it’s cool as hell. Too bad they’re coming in March. I’ll forget and it’ll be a birthday present 😂
I’ll have to look for an STL of something similar because I don’t have the patience for a 3 month wait lol.
The Omnifixo is worth every penny. Best helping hands ever made in my humble opinion!
Hi Friend, would you please kindly tell the heights of the standoff that you use in this buil? Thanks
excellent work only you have made small drone 2" I have been looking for it for some time can you share the file CNC cut carbon fiber to create me one greetings
Maybe I missed it but why don’t you print the frame?
Have you tried the new dji o3 air unit?
Nope, my goggles are the V1`s and dont really have a quad that I could use it on either (mine are all mostly sub 250`s)
What’s something like this roughly cost with controller and headset?
It really depends on what your looking to get
You can get cheap all you need to fly packages for like 2-300 but usually they come with a headset/controller you would be replacing quickly if you stick with it
budgeting 3-500 and getting some good googles/transmitter/charger/quad/batteries to start is probably a better idea
(i use a used set of DJI v1 goggles with analog adapter and a taranis x-lite with elrs module for reference)
think you gave me a new project
🤣