This is terrible. I work for an equipment rental company and we have a safety huddle every morning. Sometimes I think it's stupid because of the things they come up with. But they are right, We all need to be reminded of the situations we can encounter on the yard while checking a unit out and are not any different on the job site, Just different circumstances to deal with. Do a 360 degree evaluation up and down before beginning any type of work. At least that's the way we do it. Be Safe!
One time, when my family and I were helping a friend move, we accidentally hit the overhead service line to her apartment. The line grounded itself through the moving truck, and so, we had to wait in the cab for the energy company to de-energize the line and lift it off the truck so we could leave. We were very lucky that was just a low-voltage service line. Bottom line, before you start working, always identify where your utilities are, whether in the ground or above you. It just might save your life.
You would think that they would have a red zone painted on the ground prohibiting the raising of lifts or anything else that could get in danger range of the lines. In addition signs everywhere in that area as well.
@@artemiserectus They already had signs in place though. I don't think adding some more signs will cut it, if there is such lacking guidance for the new workers.
My father worked in the railway industry and in that year when they distributed flyers in schools teaching them about the dangers of train voltage lines, significantly more teenagers climbed onto parked trains (and sometimes died)...
I am working with scissor lifts and articulating booms and one of the main rule what we learn at the start of of the job, is to always check your surroundings. For example, our rental yards have no power cable or any cable going through above
Retired lineman 33 years and saw the after math of numerous accidents like these, a well driller putting his rig into a 7.6 -13.2 kv line killing him, company building fire trucks, operator put boom into 69kv transmission line killed instantly and numerous other burned severely or killed under estimating those overhead lines.
During the big freeze up in 2007?? in North Vancouver the power lines stretched. Four weeks later they started dropping onto the lawns and sidewalks right around Lion Gate Hospital, burning their way right into the ground. It was the first time a BMW driver paid attention when I told her she WASN'T going to go to her car. I stepped out and controlled traffic until the response team could get to the LIVE downed lines. I had photos those lines burning into the lawns, in front of the apts!!!
Electrocution is a portmanteau of Electric and Execution. Hence, the term Electro-cution means execution (or death) by electricity. The man did not die as a direct result of electrocution... something to keep in mind WorkSafeBC.
Wow, just awful. I almost felt sick when I saw his tennis shoe. What a tragic waste of life! Everybody thinks it won't happen to them until one day it does!!! My heart goes out to all who knew him. I can't imagine how crushing the feelings must be, of wishing you could go back and undo this, but knowing full well that you can't.
what about power utility companies that work right beside live lines? I saw one time they were working with live lines and didn’t actually see what started the event, but there was an enormous flash and the heat and light was incredible. Guy in the basket was ok but wow what a scare for me who doesn’t work around electric lines like that. the power of electricity is no joke.
Not a problem here in Denmark as most power lines are buried. Expensive to do but pays off after time due to savings on lack of weather related power outages , accidents and the attendant costs involved in those two scenarios.
might've been alive nearly dead tho. cause of death might be his skin burnt so badly that respiration failed, and suffocated. apparently, this happens when a person falls into molten metal/lava, it doesn't instantly kill you i heard.
We provide downloadable copies of our videos for educational, non-commercial use. To request permission, send details of your request to: copyright [at] worksafebc.com
Why would you ever lift your hand up near a power line? I'm GenX and we were stupid and did dangerous crap but one of thr very first things I learned was stay away from power lines.
These BC-recommended distances from high voltage lines are there for a reason! You do not follow these rules - you get electrocuted or die! Also - there is the static electricity theory involving flashover and being too close to the lines. Next time on a very dry, winter day, touch your fingertip to any metallic object. The voltage from any static electricity shock in this case has much lower amperage than that of the power lines with high voltage, so getting even close to, say, a metallic doorknob - say, 1/16 of an inch without touching it, and the flashover results - you see a spark and then you get the jolt from it - which is the shock. So a good rule of thumb is to stay away from at least 1/8 inch from all metallic objects whenever RH is extremely low and it is very cold, which will create perfect conditions for static electricity shocks - until you can find a way to discharge them safely. So use these static electricity shocks to send you a warning of a shocking electrocution that will happen if you disobey minimum clearances from high voltage lines.
I remember seeing a video in my EMT class of a fire dept captain (i beleive was a captain) making contact with overhead wires, while in a snorkel basket. He survived, but it was pretty bad. lost some body parts. This guy was just careless, not paying attention.
There was a news reporter out here in Los Angeles - Adrienne Alpert who was seriously injured when her news van raised the antenna ( incompetent technician ) and touched an overhead power line in 2000.
I’ve made a living from a scissor lift. They are dangerous and should be respected at any skill level. I won’t even drive under a power line let alone raise my lift near one. this person was not thinking.
The metal ground straps on the bottom are for discharging static electricity picked up by the tires when in motion. Unfortunately they were the cause of death in this case.If those ground straps had not been there this guy would in all likely hood still be alive.
Yeah the ground on the lift was essentially the negative pole...the wire dangling was the positive pole....the poor man essentially became a human dielectric capacitor with a lot of conductive ions to store the energy of the 2 poles...it was a tesla coil set up waiting to zap
As the video explained, high voltages such as these, can jump a fairly large air gap. The wheel rims and the lift frame are just inches away from ground, so it could easily jump that small gap, and much farther.
srm323srm Rubber straps? For what purpose exactly? I mean, what possible purpose could they serve if they were made of rubber (like the tyres)? Are you American by any chance? I've noticed Americans like to talk a lot - make pronouncements about things they know absolutely nothing about. A bit like the president there.
We cut trees and we don't work around power lines. I know a climber that got electrocuted when he leaned back into a line when he was up in a tree. The current went through his body and blew a hole through his boot. He was completely incapacitated and a rescue had to be performed to lower him to the ground. He ended up living, but he has permanent injuries. He still does tree work, but rarely gets in a tree now.
Two big flaws. When his cab got too high, instead of just switching off the lever for vertical movement, he pannicked and defensively put his hand up. That was a fatal mistake. Also, if you ever need to use any kind of lift device or crane under power lines, never deploy the ground straps. Those are only needed when fueling the vehicle to drain static electricity (a static spark can light gasoline). If this lift truck had been ungrounded, the current from the power lines would have no reason to travel through him to reach ground, because there would be no ground to reach. The rubber tires would have insulated the vehicle.
A lot of people don't understand that electricity can arc through the air. You don't always have to touch a line to be electrocuted. Btw, he was fatally injured, not just seriously injured. Very tragic accident that should not have happened.
"While job shadowing of more senior workers is essential, don't rely on that alone for training" Yeah, maybe don't rely on it alone, but you damn sure better pay attention!
WHY DID THE EMPLOYER EVEN ALLOW EQUIPMENT INTO THAT AREA?? HOW ABOUT A GUARDRAIL TO LIMIT ACCESS?? POOR TRAINING>>> POOR SUPERVISION>>>NO SAFEGUARDS>>>POWER COMPANY ALLOWING HIGH REACH EQUIPMENT ON THEIR EASEMENT.
I am not normally one to comment on these types of things, however if you could try to put yourself in the place of the Mom, Dad, siblings and other loved ones before you start typing. Hopefully it would change the way some of the comments are written. How would you feel reading some of these if it was your son that was killed? With all due respect and sincere condolences to the family. Secondly, I notice over one million views. I think Worksafe BC has done a great job of public education here. Thank you.
The worker in this video as well as any kid who ever climbed an electrical tower or pole and got electrocuted had any intention of touching the line, they were simply never informed by anyone that electricity can jump through the air. If you already knew this.. have you ever shared it?
Ever hear of lightning, that is electricity jumping through the air! The neutral ground wire runs below the primarys, if the boom was to close it would also jump to it .
also, it pays to get the right facts and not just "assume" if you're confronting a risk with technical/engineering aspects. Utility companies are generally willing to give technical/informational type help when asked. We can't all know everything. Sometimes is really pays to ask someone who really knows.
Ground insulated equipment is an option. in most cases lifesaving. Ground potential up there on a platform is the cause for such tragedies. and dry weather. Never do powerline maintenance in rain, snow, storm or otherwise damp / wet / humid / unsettled weather of course.
I don't know about you, but I'd stay a whole lot more than 3 meters or 10 feet from high power lines. More like about 30 or 40 feet! Seriously!! Take ZERO chances!
Voltage determines the flash-over distance. As of amperage, in power lines it’s always more than enough to fry someone and start a fire, be it 100 or 10000 amps.
I definitely would have thought that within the first 5 minutes of your first day working here somebody would have said.... “So obviously don’t be lifting under them power lines!” ☝️😌
Saying someone was electrocuted automatically means they died from the incident. A result in injury would be an electric shock injury, not electrocution. Something to look for in the future.
+Harry Balzak i have had this discussion w many non electricians. Electrocution.. execution.. notice similarities? Electrocution = death via electric shock. I know.. how many no electricians say "i got electrocuted". my response is "really? how are you still talking to me? am I talking to my first ghost?"
Vance Ogden Being a carpenter I know several electricians very well. One I have known since high school. All of them, and my carpenter associates, say "i got electrocuted", or "I got shocked" interchangeably. Colloquially they mean the same thing and many dictionaries have '*injury or* death from electric shock' as the definition.
+Harry Balzak i dont care how many "electricians you know" as a carpenter. They aren"t knowledgable electricians if they say "i got electrocuted". Again. IBEW electrician 《《《 28 years. I probably said same thing before I got in the trade. I stopped sometime as a first year greenhorn.
How many times does this need to be said - it's not the voltage that will kill you it's the amperage!!! When it comes to amperage 0.1 to 0.2 amps is enough to be fatal, any energized power line you will ever see carries far more than this.
If I hadn't seen this, I'd have assumed I'm safe around power lines as long as I can ensure I don't touch them. But that wouldn't have been a big deal, because I'm not a construction worker.
BC is HUGE on safety especially around the lower mainland and Vancouver. I can't imagine the concept of safety in "freedom fry" areas like Alberta, Texas, and Florida.
+hovnanian no he didnt touch the line, electricity at that high level of voltage can jump like 13cm from a line to other object through air. so you better dont get close to one.
hovnanian Only if the line have less than 150000 volts, electricity can jump like 1mm in the air per 1000 volts so if the line have 100000v you should stay more than 10cm away. It depends on the humidity and temperature of air also.
Safe working distances must alway be maintained. 132 kv it’s about. 9 feet 275 kv it’s about 12 ft. 275 kv about 18 ft Closer than that you are in high risk areas & not permitted , Damp or high humidity weather makes it more dangerous
Why don't power companies run a low voltage bottom wire below the high voltage lines? Any contact with this lower wire by machinery would set off a flashing light and audible siren at the nearest pole warning the worker.
Most people do not come into contact with power-lines. I would say those that do either work in some related field or construction in general, and should pay better attention to there surroundings. It is common knowledge that power-lines are dangerous so the vast majority stay clear, although accidents happen. I don't disagree that in some instances it "makes the most sense" to put more into safety measures, I just don't think this is one of them. The cost greatly outweighs the benefit.
Ghost The cost would actually be that of a thin aluminum wire [or two] stretching from pole to pole, and an alarm box which is next to nothing in cost considering most of us can visit our local Home Dipshit and purchase a cheap China-made door alarm for approximately the same cost. I'm not saying, "Let's go elaborate." but just have something there that safeguards the less informed people. It could be cost effective, and if dispersed over a large number of customers, the rise in utility rates to pay for such a safety device would be miniscule. You do know that the life of just one individual is priceless, right? There's no "millions" or "billions" of dollars to measure against the value of a human life. So why not advance the entire electrical network towards better safety? To save one life would have the system pay for itself, but I have a feeling it will save hundreds of lives over time. Enough of the defeatism! People should drop the low mentality of implementing improved safety measures only after accidents occur and instead seek the higher mentality of preemptive action. Common sense sees the problem and accident before it happens. Common sense acts upon and prevents the accident before it happens. Does power company management and their employees lack common sense?
When working with powerlines you must always treat them as if they have no insulation, it the same principal and when you are handling a gun, treat every gun as if it is loaded
They should of had flags on those lines to begin with, having equipment that could potentially come in contact with those lines. No one took a few minutes to do a risk assessment. What a shame
I thought those lines above had a rubber insulation over them. I guess it depends cause I know that Three-phase electric power transmission lines do not have insulation.
Its very sad.i am sure that engineers must working together with other countries.In belgium and the netherlands and germany and other modern european countries they have very good trained people about electricity.and of course i have the greatest respect for these guys.A simple question.How is it possible that in the states so many people died? Is the problem the gouvernement.Is there enough money for a better structure and solutions? And also the cables underground until 12 kV.
The whole lift rental should be located elsewhere, where there is now powerlines overhead! The warning signs won't help and there is a great likelyhood for this to happen again!
Alternating current (AC) Electricity flows through any conductive path to earth ground , it also flows from phase to phase . The top wires are the energized phases , the wire several feet below them is the neutral ground wire. Flow can be phase to phase ,and or phase to neutral ground wire or direct to earth ! These wires are not insulated! The service drop to the customer is insulated, but never touch it ,as it could have bare spots!
I drive trucks AND operate heavy equipment. Before that, I was an electrician. I can tell you that noting mixes with electricity, especially high voltage!
Learn more about working safely around electricity: www.worksafebc.com/electricity
And don’t use your tape measure to check if your ten feet
Lol
@IAMTOPWRENCH1 metal or not it could potentially jump as well
🤣🤣🤣🤣
Holy shit hahaha. That's unfortunately necessary to actually mention cause someones gunna do that shit
This is terrible. I work for an equipment rental company and we have a safety huddle every morning. Sometimes I think it's stupid because of the things they come up with. But they are right, We all need to be reminded of the situations we can encounter on the yard while checking a unit out and are not any different on the job site, Just different circumstances to deal with. Do a 360 degree evaluation up and down before beginning any type of work. At least that's the way we do it. Be Safe!
yard needed to delineate where lifts were not allowed. perhaps with a substantial speed bump.
I'm gonna guess it's there now.
Well they do it because somebody has done it at one point
0:52 I don't think most people understand that just getting relatively close is a problem.
One time, when my family and I were helping a friend move, we accidentally hit the overhead service line to her apartment. The line grounded itself through the moving truck, and so, we had to wait in the cab for the energy company to de-energize the line and lift it off the truck so we could leave. We were very lucky that was just a low-voltage service line. Bottom line, before you start working, always identify where your utilities are, whether in the ground or above you. It just might save your life.
My uncle died when a truck caught overhead lines which fell on him.
Someone was smart enough to know you STAY in the cab??
by low voltage you mean 120v AC instead of 240v AC yeah still enough to stop your heart
You would think a lift rental place located under power lines would have taken precautions against lifting in that area?
You are giving to much intellectual credit to society.
You would think that they would have a red zone painted on the ground prohibiting the raising of lifts or anything else that could get in danger range of the lines. In addition signs everywhere in that area as well.
They put up a couple signs afterwards. Lesson learned.
@@artemiserectus They already had signs in place though. I don't think adding some more signs will cut it, if there is such lacking guidance for the new workers.
My father worked in the railway industry and in that year when they distributed flyers in schools teaching them about the dangers of train voltage lines, significantly more teenagers climbed onto parked trains (and sometimes died)...
Everytime someone idiot proofs something, the universe creates better idiots.
I am working with scissor lifts and articulating booms and one of the main rule what we learn at the start of of the job, is to always check your surroundings. For example, our rental yards have no power cable or any cable going through above
Great video it teaches people at how dangerous electricity is.
Retired lineman 33 years and saw the after math of numerous accidents like these, a well driller putting his rig into a 7.6 -13.2 kv line killing him, company building fire trucks, operator put boom into 69kv transmission line killed instantly and numerous other burned severely or killed under estimating those overhead lines.
During the big freeze up in 2007?? in North Vancouver the power lines stretched. Four weeks later they started dropping onto the lawns and sidewalks right around Lion Gate Hospital, burning their way right into the ground. It was the first time a BMW driver paid attention when I told her she WASN'T going to go to her car. I stepped out and controlled traffic until the response team could get to the LIVE downed lines. I had photos those lines burning into the lawns, in front of the apts!!!
Electrocution is a portmanteau of Electric and Execution. Hence, the term Electro-cution means execution (or death) by electricity. The man did not die as a direct result of electrocution... something to keep in mind WorkSafeBC.
they should make voltage sensors on lifts if it gets within couple feet it disables the lift.
+Rudy c It'd make more sence to re-enable and go down.
+Rudy c That is not a bad idea.
Far easier to get into the habit of looking up first
Or at least an Alarm or something lol
great idea !
Wow, just awful. I almost felt sick when I saw his tennis shoe. What a tragic waste of life! Everybody thinks it won't happen to them until one day it does!!! My heart goes out to all who knew him. I can't imagine how crushing the feelings must be, of wishing you could go back and undo this, but knowing full well that you can't.
so true what if he had kids and a wife it would be so horrible
Not a tennis shoe. It was a work boot.
go find the video of the 4 guys pushing scaffolding around and bumping a line.
I have seen that. It sucks.
what about power utility companies that work right beside live lines? I saw one time they were working with live lines and didn’t actually see what started the event, but there was an enormous flash and the heat and light was incredible. Guy in the basket was ok but wow what a scare for me who doesn’t work around electric lines like that. the power of electricity is no joke.
Not a problem here in Denmark as most power lines are buried. Expensive to do but pays off after time due to savings on lack of weather related power outages , accidents and the attendant costs involved in those two scenarios.
"The worker, seriously injured, did not survive." I guess being killed is being seriously injured.
Great catch there! That's like being killed to death!
he might have died in hospital
might've been alive nearly dead tho. cause of death might be his skin burnt so badly that respiration failed, and suffocated. apparently, this happens when a person falls into molten metal/lava, it doesn't instantly kill you i heard.
Sod Alfredsod yeah. He was seriously injured. Bad enough he didnt survive. He must not have died instantly.
I think mortally injured would be the correct term.
wondering if I can get a copy of this video to use in an ehap course,,,, Thanks
We provide downloadable copies of our videos for educational, non-commercial use. To request permission, send details of your request to: copyright [at] worksafebc.com
Why would you ever lift your hand up near a power line? I'm GenX and we were stupid and did dangerous crap but one of thr very first things I learned was stay away from power lines.
Prayers to family 🙏🏻
My son wants to do scissor lift safety training after watching this uh uh no way am I letting my son on that death trap he'll take up a more safe job
These BC-recommended distances from high voltage lines are there for a reason! You do not follow these rules - you get electrocuted or die! Also - there is the static electricity theory involving flashover and being too close to the lines. Next time on a very dry, winter day, touch your fingertip to any metallic object. The voltage from any static electricity shock in this case has much lower amperage than that of the power lines with high voltage, so getting even close to, say, a metallic doorknob - say, 1/16 of an inch without touching it, and the flashover results - you see a spark and then you get the jolt from it - which is the shock. So a good rule of thumb is to stay away from at least 1/8 inch from all metallic objects whenever RH is extremely low and it is very cold, which will create perfect conditions for static electricity shocks - until you can find a way to discharge them safely. So use these static electricity shocks to send you a warning of a shocking electrocution that will happen if you disobey minimum clearances from high voltage lines.
I remember seeing a video in my EMT class of a fire dept captain (i beleive was a captain) making contact with overhead wires, while in a snorkel basket. He survived, but it was pretty bad. lost some body parts. This guy was just careless, not paying attention.
So after someone gets killed they decide to put up signs of warning of the power lines
There was a news reporter out here in Los Angeles - Adrienne Alpert who was seriously injured when her news van raised the antenna ( incompetent technician ) and touched an overhead power line in 2000.
She wasn’t injured until she opened the door to exit the van and her foot touched the ground.
Can anyone explain why the worker would have raised his hand "defensively"? Do you get some warning of this, like your hair standing up or something?
Good animation, I thought he got vaporized for a second, until i noticed the hand sticking up, lol!
Dude dont laugh wtf
I’ve made a living from a scissor lift. They are dangerous and should be respected at any skill level. I won’t even drive under a power line let alone raise my lift near one. this person was not thinking.
The metal ground straps on the bottom are for discharging static electricity picked up by the tires when in motion. Unfortunately they were the cause of death in this case.If those ground straps had not been there this guy would in all likely hood still be alive.
Yeah the ground on the lift was essentially the negative pole...the wire dangling was the positive pole....the poor man essentially became a human dielectric capacitor with a lot of conductive ions to store the energy of the 2 poles...it was a tesla coil set up waiting to zap
The straps are rubber, just like the tires.
As the video explained, high voltages such as these, can jump a fairly large air gap. The wheel rims and the lift frame are just inches away from ground, so it could easily jump that small gap, and much farther.
Really? When did rubber start to be a path way for electricity, Never. They are metal.
srm323srm Rubber straps? For what purpose exactly? I mean, what possible purpose could they serve if they were made of rubber (like the tyres)? Are you American by any chance? I've noticed Americans like to talk a lot - make pronouncements about things they know absolutely nothing about. A bit like the president there.
We cut trees and we don't work around power lines. I know a climber that got electrocuted when he leaned back into a line when he was up in a tree. The current went through his body and blew a hole through his boot. He was completely incapacitated and a rescue had to be performed to lower him to the ground. He ended up living, but he has permanent injuries. He still does tree work, but rarely gets in a tree now.
Two big flaws. When his cab got too high, instead of just switching off the lever for vertical movement, he pannicked and defensively put his hand up. That was a fatal mistake.
Also, if you ever need to use any kind of lift device or crane under power lines, never deploy the ground straps. Those are only needed when fueling the vehicle to drain static electricity (a static spark can light gasoline). If this lift truck had been ungrounded, the current from the power lines would have no reason to travel through him to reach ground, because there would be no ground to reach. The rubber tires would have insulated the vehicle.
A lot of people don't understand that electricity can arc through the air. You don't always have to touch a line to be electrocuted.
Btw, he was fatally injured, not just seriously injured. Very tragic accident that should not have happened.
Good warning. This reports help people to understand the danger
Situational awareness is the first and last protection
When you think about it, it's really kinda crazy how we have thousands and thousands of volts hanging all over the place, everywhere we go.
Maybe if everyone just stopped using them.
in reality,they should go underground,not above our heads...
Real Scary
@@euneadventure3112 then all the worms would die and you wouldn't have bait for fish. Would exterminate termites; that's a plus.
"While job shadowing of more senior workers is essential, don't rely on that alone for training"
Yeah, maybe don't rely on it alone, but you damn sure better pay attention!
RIP young man
Reading is fundamental as in read the warnings on the lift!
WHY DID THE EMPLOYER EVEN ALLOW EQUIPMENT INTO THAT AREA?? HOW ABOUT A GUARDRAIL TO LIMIT ACCESS?? POOR TRAINING>>> POOR SUPERVISION>>>NO SAFEGUARDS>>>POWER COMPANY ALLOWING HIGH REACH EQUIPMENT ON THEIR EASEMENT.
He wasn't seriously injured, he was fatally injured.
learned - DEATH is a serious injury
The young lady caused the accident.
He threw up his hand to say “Sup, babe?” and got lit up.
I am not normally one to comment on these types of things, however if you could try to put yourself in the place of the Mom, Dad, siblings and other loved ones before you start typing. Hopefully it would change the way some of the comments are written. How would you feel reading some of these if it was your son that was killed? With all due respect and sincere condolences to the family. Secondly, I notice over one million views. I think Worksafe BC has done a great job of public education here.
Thank you.
As an Electrical student ., I must agree 👍
10 feet hell no, stay 30 feet away just for good measure.
Yes. It's like "you are technically okay if you are just 10 feet away but I am not sure if you have the gut to walk on the edge of death"
The worker in this video as well as any kid who ever climbed an electrical tower or pole and got electrocuted had any intention of touching the line, they were simply never informed by anyone that electricity can jump through the air. If you already knew this.. have you ever shared it?
Ever hear of lightning, that is electricity jumping through the air! The neutral ground wire runs below the primarys, if the boom was to close it would also jump to it .
Why did he put his hand up
also, it pays to get the right facts and not just "assume" if you're confronting a risk with technical/engineering aspects. Utility companies are generally willing to give technical/informational type help when asked. We can't all know everything. Sometimes is really pays to ask someone who really knows.
Was the lift damaged?
The lift got a free recharge!
Actually every joint the electricity passed through would have been welded at least slightly.
Isnt the dude who voices the narrator the owner of some youtube channel that covers crimes and fatal accidents.???
What was he doing up there?
Ground insulated equipment is an option. in most cases lifesaving. Ground potential up there on a platform is the cause for such tragedies. and dry weather. Never do powerline maintenance in rain, snow, storm or otherwise damp / wet / humid / unsettled weather of course.
Thank you Joe Pera
" The worker- seriously injured" could have and should have been easily avoided. Yet another tragedy.
I don't know about you, but I'd stay a whole lot more than 3 meters or 10 feet from high power lines. More like about 30 or 40 feet! Seriously!! Take ZERO chances!
Isn't voltage irrelevant? Shouldn't they give the amperage?
Voltage determines the flash-over distance.
As of amperage, in power lines it’s always more than enough to fry someone and start a fire, be it 100 or 10000 amps.
I definitely would have thought that within the first 5 minutes of your first day working here somebody would have said.... “So obviously don’t be lifting under them power lines!” ☝️😌
They said young worker. Teenagers brains don't fully develop untill age 25.
Saying someone was electrocuted automatically means they died from the incident. A result in injury would be an electric shock injury, not electrocution. Something to look for in the future.
What? No.
www.merriam-webster.com/dictionary/electrocute. You are welcome.
+Harry Balzak i have had this discussion w many non electricians. Electrocution.. execution.. notice similarities? Electrocution = death via electric shock. I know.. how many no electricians say "i got electrocuted". my response is "really? how are you still talking to me? am I talking to my first ghost?"
Vance Ogden
Being a carpenter I know several electricians very well. One I have known since high school. All of them, and my carpenter associates, say "i got electrocuted", or "I got shocked" interchangeably.
Colloquially they mean the same thing and many dictionaries have '*injury or* death from electric shock' as the definition.
+Harry Balzak i dont care how many "electricians you know" as a carpenter. They aren"t knowledgable electricians if they say "i got electrocuted". Again. IBEW electrician 《《《 28 years. I probably said same thing before I got in the trade. I stopped sometime as a first year greenhorn.
MAYBE I´M WRONG (SORRY IN THAT CASE) BUT I THINK THAT P.LINES ARE 13,8 KV = 13800 V ... NOT 138KV
Never mind ten feet...just don't go anywhere near them
How many times does this need to be said - it's not the voltage that will kill you it's the amperage!!!
When it comes to amperage 0.1 to 0.2 amps is enough to be fatal, any energized power line you will ever see carries far more than this.
It is possible the grounding straps that touch the ground on the scissor lift enabled the flashover.
People don't know, that voltage will find a way to ground. It came thru a t40 and blew the tire out where I worked
If I hadn't seen this, I'd have assumed I'm safe around power lines as long as I can ensure I don't touch them. But that wouldn't have been a big deal, because I'm not a construction worker.
BC is HUGE on safety especially around the lower mainland and Vancouver. I can't imagine the concept of safety in "freedom fry" areas like Alberta, Texas, and Florida.
Supervision, training, mentoring, instruction etc. What did the company get fined for this corporate manslaughter?
Did he take the powerline with his hand, why ?
+hovnanian no he didnt touch the line, electricity at that high level of voltage can jump like 13cm from a line to other object through air. so you better dont get close to one.
Euphorium Inc Im ok if I am 15 cm then ?
hovnanian Only if the line have less than 150000 volts, electricity can jump like 1mm in the air per 1000 volts so if the line have 100000v you should stay more than 10cm away. It depends on the humidity and temperature of air also.
hovnanian That's a wired recharging when touching cable.
Wireless mode is at 10'/3meters close to wires in some cases.
Be safe.
Isn’t there plastic coating over wires?! 😐
Safe working distances must alway be maintained. 132 kv it’s about. 9 feet 275 kv it’s about 12 ft. 275 kv about 18 ft Closer than that you are in high risk areas & not permitted , Damp or high humidity weather makes it more dangerous
Tell me what flashover is.
great place to put a rental yard!
😂😂😂😂💯💯🙆🏽♂️
We need to give our power line repairmen more respect, cuz this is just cold..
Why don't power companies run a low voltage bottom wire below the high voltage lines? Any contact with this lower wire by machinery would set off a flashing light and audible siren at the nearest pole warning the worker.
This stuff costs enough already
Ghost Yes, I agree - money before saving human lives. That makes the most sense.
Most people do not come into contact with power-lines. I would say those that do either work in some related field or construction in general, and should pay better attention to there surroundings. It is common knowledge that power-lines are dangerous so the vast majority stay clear, although accidents happen. I don't disagree that in some instances it "makes the most sense" to put more into safety measures, I just don't think this is one of them. The cost greatly outweighs the benefit.
Ghost The cost would actually be that of a thin aluminum wire [or two] stretching from pole to pole, and an alarm box which is next to nothing in cost considering most of us can visit our local Home Dipshit and purchase a cheap China-made door alarm for approximately the same cost. I'm not saying, "Let's go elaborate." but just have something there that safeguards the less informed people. It could be cost effective, and if dispersed over a large number of customers, the rise in utility rates to pay for such a safety device would be miniscule.
You do know that the life of just one individual is priceless, right? There's no "millions" or "billions" of dollars to measure against the value of a human life. So why not advance the entire electrical network towards better safety? To save one life would have the system pay for itself, but I have a feeling it will save hundreds of lives over time.
Enough of the defeatism! People should drop the low mentality of implementing improved safety measures only after accidents occur and instead seek the higher mentality of preemptive action. Common sense sees the problem and accident before it happens. Common sense acts upon and prevents the accident before it happens. Does power company management and their employees lack common sense?
Why can't people just be smart enough to know what they are doing?
1:09
I thought it blew him up.
When working with powerlines you must always treat them as if they have no insulation, it the same principal and when you are handling a gun, treat every gun as if it is loaded
Power lifting company? Where was the training that teaches you to be aware of hazards, negligence
Why didn't they cut the power first? Don't they have breakers?
Not something you want to mess with.
Why the hell was the forklift grounded?
RIP young man.
Why are they servicing these near the power lines? Tha'ts just asking for trouble. It does seem like a possible suicide to me tbh.
They should of had flags on those lines to begin with, having equipment that could potentially come in contact with those lines. No one took a few minutes to do a risk assessment. What a shame
I thought those lines above had a rubber insulation over them. I guess it depends cause I know that Three-phase electric power transmission lines do not have insulation.
Very important video !! Thank you savings lives.
They are good at seriously understating the situation.
Rule #1: do not become a resistor or a ground.
"The worker began to raise his right arm, in what appeared to be a defensive manner". Uhh...
Did he survive
Giving is better than recieving!
in drizzly weather you can hear the BBZZZZZZHHH from very high voltage lines.
the arc will jump a gap, plain air is NOT a 100% insulator.
Its very sad.i am sure that engineers must working together with other countries.In belgium and the netherlands and germany and other modern european countries they have very good trained people about electricity.and of course i have the greatest respect for these guys.A simple question.How is it possible that in the states so many people died? Is the problem the gouvernement.Is there enough money for a better structure and solutions? And also the cables underground until 12 kV.
We're Americans. We're go getters. He was late for his coffee break.
The whole lift rental should be located elsewhere, where there is now powerlines overhead! The warning signs won't help and there is a great likelyhood for this to happen again!
I thought you only got electrocuted if you touched 2 of the lines?
Alternating current
(AC) Electricity flows through any conductive path to earth ground , it also flows from phase to phase . The top wires are the energized phases , the wire several feet below them is the neutral ground wire. Flow can be phase to phase ,and or phase to
neutral ground wire or direct to earth ! These wires are not insulated! The service drop to the customer is insulated, but never touch it ,as it could have bare spots!
Flash over ACTUALLY MEANS: traveling out through shortest path to the ground because of a greater or equal electro magnetic force
This is the first thing covered when I did my IPAF,
1:12
Being turned into dust is a serious injury 😂😂😂😂
Aren't power lines covered in a thick rubber or plastic so that won't hqppen
Emilio Martinez Nope
Why cant they insulate all lift equipment
Crona or magnetic field around power line, light breeze can elongate crona (taking from round to eggish shape). Tragic death for their family.
I drive trucks AND operate heavy equipment.
Before that, I was an electrician.
I can tell you that noting mixes with electricity, especially high voltage!
sad, but he didn't observe requirements on the lift.