Your ISP must have removed that screen. You need the root log in to see it all. But that looks very complicated to do..: thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
I have the same issue with port forwarding not working but I don't think I have a static public-IP. I setup my own webserver and I want to access it via the internet but Port Forwarding doesn't work. I logged a ticket with the ISP.
Have you tried replacing the network cable between the router and the wall box? Sometimes some cables are faulty or only have 4 wires instead of the required 8.
@@freename Thank you. I have discussed it with the Hyperoptic tech support team and they are completely clueless. I will see if I can get hold of a previous version of the firmware or buy a different router. Let me know if you have any further ideas.
hi, i have a problem connecting my Epson E 2850 ecotank printer, i have the same router all my other devices are connected except my printer i can't conncet it, it show a error message saying security key/password check.......Fail anny fix for that please.
Hi, do you know if it's possible to update the router's firmware? And if it is, where to find and updated version (I've searched the whole internet but can't find one), and how to upload it to the router? For info, my interface looks exactly the same as yours, except the "User Configuration Management" tab on the System Management option in Management & Diagnosis is missing.
It's likely your ISP has hidden those sections to "stop you breaking stuff" and causing their support team more cost and time. For example Hyperoptic hide the VoIP section too. A bit like Technicolor and the ISP only Zyxels; it's likely you can only get the firmware if you are the ISP and must deploy the firmware as the ISP via remote rather than send the file to the customer. There is a way to hack this router but it is very complex: thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
It might be under some of the pages hidden by your ISP (if your ISP has hidden pages): thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
@@LalanDesai It looks like they might use CGNAT (Carrier Grade NAT) where you share an IP address with tens or hundreds of customers. You can't port forward because the IP address is on their equipment and not on your router. Providers in the UK often allow you to pay extra for a static public IP address (not CGNAT) which would then allow you to do port forwarding. See if your provider offers a similar service.
@@LalanDesai Your only option is a VPN service which gives you a public IP then. One example (though in the UK so might not work well for where you are) is Andrews & Arnold who do an L2TP VPN with a static IP. You'd need a router supporting L2TP to run and route the traffic and fairly complex to setup too.
Hi man, sorry I'm asking very late on the video, but does this model of the router not have an option to view users internet search history? I'm looking for it so far nothing
Hi I’m trying to open some UDP ports for my Xbox NAT type connection but it’s saying it’s invalid when I put in all the parameters like you have done (obviously using my own ports and IP). Can you help please?
Are you on Hyperoptic? What does it show on the router for your WAN IP? Does it start 100. ? (Just want to check if port forwarding will even work for you due to the quite high chance you are on CGNAT [Carrier Grade NAT] if you are a Hyperoptic customer).
@@freename yes I’m on hyperoptic. The WAN starts with 100 too. I noticed UPnP was turned off so I turned that on then it let me add UDP 88 for my Xbox which is one that I need and that helped significantly. However it won’t let me add any other ports
@@rosswalker8177 No matter what you do port forwarding and UPNP won't work. You are on CGNAT with a 100. IP address which means you share a public IP address with tens or hundreds of other customers. Inbound ports don't work in that setup. Only outbound works.
What are some settings I change to enhance gaming? Idk why but I’m a second behind on online games and the router test in management says 100% packet loss pls help :(
Unless you pay for a static IP with Hyperoptic, Hyperoptic use CGNAT which means you can never have open NAT. You share a public IP address with hundreds of other people. However, that shouldn't affect your ping. If you use a computer to ping 208.67.222.222 what ms do you get? E.g. I get 4.5ms Also, don't use WiFi for games! Wire in.
13:45 - If you can't find that same section it is possible your ISP has hidden that page. Check that the firmware version of the router is the same or higher than the one I show in the video, if it is - speak to your ISP and ask why you can't see or set the UPnP option.
Yes but you would probably need to "root" the router if you can't see the settings. It doesn't look like it is an easy task.. but someone's got instructions here: thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
It isn't the last item on the sticker on the underneath right side. Below "WiFi PASSWORD" ? See ua-cam.com/video/X_Ou0lH85AQ/v-deo.html for what my router looked like.
Hi , Do you know if the ZTE ZXHN H298A router admin interface allows for the admin to check visited websites or urls? And if so can you please tell me how?
Almost no router supports this. Or it's unlikely to be of any use if they do due to the sheer number of requests every computer and device sends even if they are not in use. The router doesn't know the difference between you browsing to a site vs. the machine or device downloading updates, checking for new notifications, refreshing authentication tokens etc.
@@aidhynnayak713 I don't know of any consumer / residential router provided by an ISP where this is a function. But.. there are many ways you can monitor a network unrelated to the router. If your router or computer is set to use OpenDNS then OpenDNS provides reporting on what has been accessed.
@freename I've just switched to Hyperoptic from Sky and I have a WD MyCloud EX2 Ultra NAS that was working like a treat on Sky, but won't connect now I've moved to Hyperoptic. Any thoughts? WD don't seem to know ... Hyperoptic are less than useless. WD tell me that the NAS needs access to ports 443, 8443 and 40000-49999 to work, which I read somewhere is reserved for Hyperoptic service access.
As in the function to access your NAS when you are away from home? If those are port forwards on the router then it won't work on Hyperoptic as they use CGNAT (Carrier Grade NAT) where tens, if not hundreds of customers share a public IP address. The only way around it is to either pay for a static IP address or grumble enough that they give one to you free (no idea if they do this, but CGNAT is a terrible idea so making Hyperoptic's life annoying over it is a good plan).
Yes but I don't have the router any more to test with :( I'd suggest looking at F12/Developer tools in your browser to see how it logs in, what cookies you need to store and repeat for the device list page. Also see if you can SSH in? Command line ssh to the router, if it supports it, might be easier for what you need.
@@freename hi, could you make a video how to configure the router so I can access a drive over the internet for the life of me I can't figure it out... 😔
If you can't see the settings then your ISP has probably locked the settings down. The hack is complicated but someone's done it: thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
If you don't pay Hyperoptic the extra £5 per month for a static IP you won't be able to have inbound ports forwarded. Non static customers are on CGNAT / Carrier Grade NAT where you share an IP with multiple other customers.
I have the same issue I tried to put my webserver on the DMZ and I opened every Port to make sure but it I still can't access my website over the internet , I just logged a ticket with Hyperoptic and waiting for them to reply
The router in my video (ZTE ZXHN H298A) is an Ethernet router not a DSL router so doesn't support VDSL profiles at all. More info and pictures of the outside of the router are here: ua-cam.com/video/X_Ou0lH85AQ/v-deo.html
The ISP has the option to restrict or hide settings. I'd recommend swapping the router for your own if that is possible. Or you could try google for "full root hyperoptic zte" for very geeky complicated trick to take full control of the router.
Hi, Is someone who tried to do minecraft server on this router? I got it a few days ago and cant figure out how to setup port forwarding etc to launch minecraft server on my pc so I could play it with friends
Come hai ottenuto la possibilità di fare tutte le modifiche? Io ho un zxhn h3600 ma quando faccio 192.168.1.1 non posso fare tutte queste modifiche solo le password e guardare i dispositivi connessi..
It is likely that your ISP lock down the settings so you cannot change them. If you are very technical someone has found a hack to reset the root password (all the settings!): thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/ Google Translate: È probabile che il tuo ISP blocchi le impostazioni in modo da non poterle modificare. Se sei molto tecnico qualcuno ha trovato un trucco per reimpostare la password di root (tutte le impostazioni!): thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
Set LAN IP address to something not already in use. Turn off DHCP server and IPv6, plug lan port to lan port of your existing router. Should do the trick.
So If I know the MAC address and would like to block that device (without changing wifi's name), I should add that device as a new item and that's it? or need to touch something in the Black/White list config? I was a little confused in this part. For the rest, it was a great explanation of this router. Thank you!
If it is a wireless connected device 10:43 select blacklist for the SSID(s) and then enter the MAC and SSID to block on in the section below. You could also try the Parental Controls at 6:30 if it is a wired device or if the wireless MAC control doesn't appear to be working the way you need.
Set it to an IP not in use on your network. Turn off IPv6 if you find any settings for that. Set the WiFi name and password to what you want. Turn off the DHCP server. Plug the yellow lan port into your LAN.. should work as an access point only!
Hi - thanks for taking the time to make and share the video. The problem I have is that my ZTE ZXHN H298A router (V1.0 V1.0.25_HOP.1T11) no longer shows the Samba Service option. It used to but now it is not on the list under Status when I am in the Local Network menu. It just shows: WLAN; LAN; FTP; UPnP; DMS and DNS. if anyone can help it would be much appreciated.
Hey there bro, I've been struggling for about a week now, and I really need your help, man. The thing is, I've got this ZTE router with the same admin panel as yours, and I've been trying to play games remotely using Moonlight and Sunshine. They're supposed to work together smoothly, but I've hit a major roadblock. I've done everything I can think of, bro. I disabled Windows Defender, checked the ports with a port checker, tried port forwarding, messed around with DMZ, and even set the host IP multiple times. But here's the kicker: when I test my ports, it keeps telling me that ports 47984, 47989, and even port 80 are closed. It's driving me crazy, man! I'm reaching out to you with a desperate plea, bro. Can you please, pretty please, help me out? I'll be forever in your debt if you can figure this out for me. I'm counting on you, man. Desperately seeking your assistance,
What IP does the router claim it has for WAN and what IP do you see if you go to www.ip4.me ? What ISP are you with (I wonder if your ISP uses Carrier Grade NAT (CGNAT)).
Not a clue and I suspect ZTE are the kind of vendor who won't give out firmware to the public, I expect your ISP have to get it and then send it to you.
Holy, cow you don't know how happy you made me! This is one of the best videos on the interface I have seen. It seems to be such a niche thing but god are you helpful.
Maybe 10:43 - MAC address filtering. but thats a bad way of blocking stuff and easy to get around. Sensible way: Change the wifi name and password to something they don't know.
Hi, thanks for the video. Is it possible to block internet access for some wifi connected devices between certain times of day? (Yes, I've got kids 😖😂)
It's not configured by default unless you have their phone service. Google the router model and tr-069, there is a wordpress.com site on hacking the router to access all the settings.
The hundreds of networks I support and the ISP I run the DHCP server for beg to differ. What do you feel is wrong? If you have time and would like to, you might want to look at my active directory setup tutorial videos too. It may reveal more about what I know (or do not know).
@@freename No issue. It's probably a moot point anyway, as for some reason even when I turn DHCP off on mine I can't use it as an AP. It registeres a new IP address, but nothing else. Maybe you could help expand on this?
My zte portal, security tab is showing these settings. Please help me 4:01
I don't understand the question.
@@freename in the security section, Mac and ip filter isn't showing
Your ISP must have removed that screen. You need the root log in to see it all. But that looks very complicated to do..:
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
I have the above router with a static IP £5.00 but the port forwarding still does not work
I have the same issue with port forwarding not working but I don't think I have a static public-IP. I setup my own webserver and I want to access it via the internet but Port Forwarding doesn't work. I logged a ticket with the ISP.
@@Giancarlo_Sforza have they fixed it? I´m trying for simple Remote desktoping and no access either.
@@celiosilva1910 you need to contact your ISP and ask them to assign you a Static IP Address.
They charged me an additional £5/month
my router WAN setting stock in 100m full duplex and I need to know how can i change it to 1000m full duplex
Have you tried replacing the network cable between the router and the wall box? Sometimes some cables are faulty or only have 4 wires instead of the required 8.
Any ideas on the question below: why is Samba Service no longer showing on the list of Local Network options:
Very likely a firmware update removed the function or Hyperoptic restricted the function.
@@freename Thank you. I have discussed it with the Hyperoptic tech support team and they are completely clueless. I will see if I can get hold of a previous version of the firmware or buy a different router. Let me know if you have any further ideas.
Definitely go the route of using your own router :)
hi, i have a problem connecting my Epson E 2850 ecotank printer, i have the same router all my other devices are connected except my printer i can't conncet it, it show a error message saying security key/password check.......Fail anny fix for that please.
Can you use WPS to connect instead rather than typing in the WiFi password?
@@freename no i have jut the wifi-password option
yes i have it i found it
@@freename thank you very much it worked with the WPS connection
Hi, do you know if it's possible to update the router's firmware? And if it is, where to find and updated version (I've searched the whole internet but can't find one), and how to upload it to the router? For info, my interface looks exactly the same as yours, except the "User Configuration Management" tab on the System Management option in Management & Diagnosis is missing.
It's likely your ISP has hidden those sections to "stop you breaking stuff" and causing their support team more cost and time. For example Hyperoptic hide the VoIP section too.
A bit like Technicolor and the ISP only Zyxels; it's likely you can only get the firmware if you are the ISP and must deploy the firmware as the ISP via remote rather than send the file to the customer.
There is a way to hack this router but it is very complex:
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
Hi I have the ZXHN H298A V1.0 is there anyway to change mtu settings? Thanks
It might be under some of the pages hidden by your ISP (if your ISP has hidden pages):
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
I tried port forwarding but didn't work. I wonder if ESET internet security interfere and I removed it temporarily but same problem.
Do you pay hyperopic for a static IP? If no, you will be on CGNAT where you share an IP with tens of other customers and port forwarding won't work!
Port forwarding is not working. Any help?
Which ISP?
@@freename Gtpl Broadband Pvt. Ltd
@@LalanDesai It looks like they might use CGNAT (Carrier Grade NAT) where you share an IP address with tens or hundreds of customers. You can't port forward because the IP address is on their equipment and not on your router. Providers in the UK often allow you to pay extra for a static public IP address (not CGNAT) which would then allow you to do port forwarding. See if your provider offers a similar service.
@@freename no it doesn't.
@@LalanDesai Your only option is a VPN service which gives you a public IP then. One example (though in the UK so might not work well for where you are) is Andrews & Arnold who do an L2TP VPN with a static IP. You'd need a router supporting L2TP to run and route the traffic and fairly complex to setup too.
Hi man, sorry I'm asking very late on the video, but does this model of the router not have an option to view users internet search history? I'm looking for it so far nothing
Hi I’m trying to open some UDP ports for my Xbox NAT type connection but it’s saying it’s invalid when I put in all the parameters like you have done (obviously using my own ports and IP). Can you help please?
Are you on Hyperoptic? What does it show on the router for your WAN IP? Does it start 100. ?
(Just want to check if port forwarding will even work for you due to the quite high chance you are on CGNAT [Carrier Grade NAT] if you are a Hyperoptic customer).
@@freename yes I’m on hyperoptic. The WAN starts with 100 too. I noticed UPnP was turned off so I turned that on then it let me add UDP 88 for my Xbox which is one that I need and that helped significantly. However it won’t let me add any other ports
Just seen that hyperoptic do use CGN and that I need to pay £5/month for a static IPv4
@@rosswalker8177 No matter what you do port forwarding and UPNP won't work. You are on CGNAT with a 100. IP address which means you share a public IP address with tens or hundreds of other customers. Inbound ports don't work in that setup. Only outbound works.
@@freename very frustrating as bought hyperoptic for their super fast wifi. Had BT before and had no NAT problems with them
What are some settings I change to enhance gaming? Idk why but I’m a second behind on online games and the router test in management says 100% packet loss pls help :(
Somehow also gives me a moderate nat on my pc which I find weird but I’m a noob
Unless you pay for a static IP with Hyperoptic, Hyperoptic use CGNAT which means you can never have open NAT. You share a public IP address with hundreds of other people.
However, that shouldn't affect your ping. If you use a computer to ping 208.67.222.222 what ms do you get? E.g. I get 4.5ms
Also, don't use WiFi for games! Wire in.
Hello, in my router i cant find uPnP i looked everywhere... can you help me?
13:45 - If you can't find that same section it is possible your ISP has hidden that page. Check that the firmware version of the router is the same or higher than the one I show in the video, if it is - speak to your ISP and ask why you can't see or set the UPnP option.
hello is there a way to change the authentication/connection type from FTTP to PPPoE on this router type?
Yes but you would probably need to "root" the router if you can't see the settings. It doesn't look like it is an easy task.. but someone's got instructions here:
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
@@freename thank you for your help, a bit too difficult for me, but nice to know its possible👍
where's the user pass thing its not on my router sticker?
It isn't the last item on the sticker on the underneath right side. Below "WiFi PASSWORD" ?
See ua-cam.com/video/X_Ou0lH85AQ/v-deo.html for what my router looked like.
Hi , Do you know if the ZTE ZXHN H298A router admin interface allows for the admin to check visited websites or urls? And if so can you please tell me how?
Almost no router supports this. Or it's unlikely to be of any use if they do due to the sheer number of requests every computer and device sends even if they are not in use. The router doesn't know the difference between you browsing to a site vs. the machine or device downloading updates, checking for new notifications, refreshing authentication tokens etc.
@@freenameThanks for the quick reply Great video , very helpful
@@freename So this specific router is one that does not support this feature right?
@@aidhynnayak713 I don't know of any consumer / residential router provided by an ISP where this is a function. But.. there are many ways you can monitor a network unrelated to the router. If your router or computer is set to use OpenDNS then OpenDNS provides reporting on what has been accessed.
@@freename Ok thanks
@freename I've just switched to Hyperoptic from Sky and I have a WD MyCloud EX2 Ultra NAS that was working like a treat on Sky, but won't connect now I've moved to Hyperoptic. Any thoughts? WD don't seem to know ... Hyperoptic are less than useless. WD tell me that the NAS needs access to ports 443, 8443 and 40000-49999 to work, which I read somewhere is reserved for Hyperoptic service access.
As in the function to access your NAS when you are away from home?
If those are port forwards on the router then it won't work on Hyperoptic as they use CGNAT (Carrier Grade NAT) where tens, if not hundreds of customers share a public IP address.
The only way around it is to either pay for a static IP address or grumble enough that they give one to you free (no idea if they do this, but CGNAT is a terrible idea so making Hyperoptic's life annoying over it is a good plan).
hi is it possibe to create a batch or bash script to login into router with curl and extract connected devices list?
Yes but I don't have the router any more to test with :( I'd suggest looking at F12/Developer tools in your browser to see how it logs in, what cookies you need to store and repeat for the device list page. Also see if you can SSH in? Command line ssh to the router, if it supports it, might be easier for what you need.
hello! can i limit wi fi speed with this router?if yes how? for example if my speed is 100mbps to limit at 80 % for mobile-tv etc devices
Not possible with the router (or at least with the firmware I had on the router in the video).
@@freename hmmm,ok.thank you for your answer
@@freename hi, could you make a video how to configure the router so I can access a drive over the internet for the life of me I can't figure it out... 😔
Do you know if there is any way to check the logs of connections to the router and what was searched? Thanks for the video.
That's a no. Unless someone's made changes and directing your DNS or other traffic elsewhere.
@@freename ok thanks a lot!
Hi. how can i change VoIP Parameter on this device ?
If you can't see the settings then your ISP has probably locked the settings down. The hack is complicated but someone's done it: thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
can you share the html/css code of that login page
What are you after from it?
Can I use a usb stick as a network drive? If yes where I can go to setup this?
14:45 are the settings you need.
It doesnt have QoS service?
Not on the firmware I had.
Port forwarding doesn't seems to work for me on this one, any tips? I even used DMZ and Low Firewall and I got nothing.
If you don't pay Hyperoptic the extra £5 per month for a static IP you won't be able to have inbound ports forwarded. Non static customers are on CGNAT / Carrier Grade NAT where you share an IP with multiple other customers.
I have the same issue I tried to put my webserver on the DMZ and I opened every Port to make sure but it I still can't access my website over the internet , I just logged a ticket with Hyperoptic and waiting for them to reply
That support 35b profile? To receive more than 150mbs
The router in my video (ZTE ZXHN H298A) is an Ethernet router not a DSL router so doesn't support VDSL profiles at all.
More info and pictures of the outside of the router are here: ua-cam.com/video/X_Ou0lH85AQ/v-deo.html
@@freename thank u bro but i have a last question what is the difference between zyxel dx5401and zyxel vmg8825-b50b
@@abdallahnoaman5337 Looks the same, maybe one is for ISP sale only and the other is for retail ?
@@freename
Thank you so much❤
Hi! Thank you for the video! My question: can I istall a VPN on this router model? 😀
No.
How can I delete the router search history?
Routers can't tell what you search on google, bing, duckduckgo etc. They might be able to tell you visited google but not what you typed in.
I couldn't find DHCP binding on mine.
Not at 12:50 above Port Control? Who provided your router/what ISP are you with?
@@freename It's actually my Mexican friend's router. She uses MegaCable.
The ISP has the option to restrict or hide settings. I'd recommend swapping the router for your own if that is possible.
Or you could try google for "full root hyperoptic zte" for very geeky complicated trick to take full control of the router.
how can i change MTU cant find it anywhere
Which ISP provided it? They quite likely lock the settings screens down so you can't get to some items.
Does anyone know if there is a way to turn off the ipv6?
Which ISP?
And it looks like IPv6 either wasn't enabled or the options were hidden on the Hyperoptic provided one I used for recording this video!
Hi, Is someone who tried to do minecraft server on this router? I got it a few days ago and cant figure out how to setup port forwarding etc to launch minecraft server on my pc so I could play it with friends
Are you on Hyperoptic? What IP does the router report for the WAN IP? Does it start with 100. ?
@@freename Well Im not sure if I have it or not
@@rutex07 Who is your ISP?
well im from poland (and inea)@@freename
Come hai ottenuto la possibilità di fare tutte le modifiche? Io ho un zxhn h3600 ma quando faccio 192.168.1.1 non posso fare tutte queste modifiche solo le password e guardare i dispositivi connessi..
It is likely that your ISP lock down the settings so you cannot change them. If you are very technical someone has found a hack to reset the root password (all the settings!):
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
Google Translate:
È probabile che il tuo ISP blocchi le impostazioni in modo da non poterle modificare. Se sei molto tecnico qualcuno ha trovato un trucco per reimpostare la password di root (tutte le impostazioni!):
thecomputerperson.wordpress.com/2021/12/29/gaining-full-root-access-to-the-hyperoptic-zte-zxhn-h298a/
Any help about zte ZXNH H298Q ?
What help do you mean?
@@freename ppp to ip .i want to make it like access point
Set LAN IP address to something not already in use. Turn off DHCP server and IPv6, plug lan port to lan port of your existing router. Should do the trick.
@@freename im trying and it isnt working, if u can help id appreciate it
@@freename also i cant fin ipv6 maybe thats it
So If I know the MAC address and would like to block that device (without changing wifi's name), I should add that device as a new item and that's it? or need to touch something in the Black/White list config?
I was a little confused in this part. For the rest, it was a great explanation of this router. Thank you!
If it is a wireless connected device 10:43 select blacklist for the SSID(s) and then enter the MAC and SSID to block on in the section below.
You could also try the Parental Controls at 6:30 if it is a wired device or if the wireless MAC control doesn't appear to be working the way you need.
did you found a way to use it as a wifi repeater?
As a WiFi access point: Yes.
As a WiFi repeater (where the backhaul is not via a LAN cable): Not possible.
@@freename how do you use it as an access point? I would appreciate you helping
Set it to an IP not in use on your network. Turn off IPv6 if you find any settings for that. Set the WiFi name and password to what you want. Turn off the DHCP server. Plug the yellow lan port into your LAN.. should work as an access point only!
Hi - thanks for taking the time to make and share the video.
The problem I have is that my ZTE ZXHN H298A router (V1.0 V1.0.25_HOP.1T11) no longer shows the Samba Service option. It used to but now it is not on the list under Status when I am in the Local Network menu. It just shows: WLAN; LAN; FTP; UPnP; DMS and DNS.
if anyone can help it would be much appreciated.
Where/How I can setting up my VPN on this router?
VPN Client support (where the router connects) is rare. This router can't do it.
i cant find mtu on my zte h369a
Your provider might have hidden the option.
Hey there bro,
I've been struggling for about a week now, and I really need your help, man. The thing is, I've got this ZTE router with the same admin panel as yours, and I've been trying to play games remotely using Moonlight and Sunshine. They're supposed to work together smoothly, but I've hit a major roadblock.
I've done everything I can think of, bro. I disabled Windows Defender, checked the ports with a port checker, tried port forwarding, messed around with DMZ, and even set the host IP multiple times. But here's the kicker: when I test my ports, it keeps telling me that ports 47984, 47989, and even port 80 are closed. It's driving me crazy, man!
I'm reaching out to you with a desperate plea, bro. Can you please, pretty please, help me out? I'll be forever in your debt if you can figure this out for me. I'm counting on you, man.
Desperately seeking your assistance,
What IP does the router claim it has for WAN and what IP do you see if you go to www.ip4.me ?
What ISP are you with (I wonder if your ISP uses Carrier Grade NAT (CGNAT)).
Hi my friend I need the official firmware F680 V6 can you help me
Not a clue and I suspect ZTE are the kind of vendor who won't give out firmware to the public, I expect your ISP have to get it and then send it to you.
How change mac?
Not sure you can, sorry.
SSID isolation does not work on this router.
Holy, cow you don't know how happy you made me! This is one of the best videos on the interface I have seen. It seems to be such a niche thing but god are you helpful.
I know how frustrating it is to try and talk someone through a web interface you can't see or find screenshots for :)
How to change internet router name ?
The WiFi name? ( And password )¿
Bro how to disable qr code shared wifi
Qr code on a sticker on the router? Change the WiFi name and password(key). Then the sticker won't have the correct details.
Tiene qos?
Not in the firmware / configuration I had access to.
Thank you for making this video.
could you please send me the firmware file for the model in the video? H298A
I don't know where you can get the firmware. Sorry.
Highly educational. Big up man
Thanks :)
How to block someone ZTE modem
Maybe 10:43 - MAC address filtering. but thats a bad way of blocking stuff and easy to get around.
Sensible way: Change the wifi name and password to something they don't know.
Hi there, QoS?
I don't think there is.
@@freename thanks again for the speedy response
Hi, thanks for the video. Is it possible to block internet access for some wifi connected devices between certain times of day? (Yes, I've got kids 😖😂)
Try these video sections..
2:26 - Website blocking
6:30 - Parental Controls / Timed access to the internet.
Hello, password user admin please?
It's on the sticker on the router. They are all unique.
16:26 might be a good idea to connect the WAN to PC and see what Wireshark asking for VoIP :)
It's not configured by default unless you have their phone service. Google the router model and tr-069, there is a wordpress.com site on hacking the router to access all the settings.
what is password please helpp
It is unique to each router and is on the sticker. Listen to the instructions at 00:15 .
@@freename bro any password
Hello Jeff, I would like to request a lead meditation podcast by you. I have trouble sleeping. Thanks
Qr code stop
You want to stop the qr code on the router from connecting them to the WiFi? If so, log into the admin page and change WiFi name and password!
you have very little clue about networking and dhcp
The hundreds of networks I support and the ISP I run the DHCP server for beg to differ. What do you feel is wrong?
If you have time and would like to, you might want to look at my active directory setup tutorial videos too. It may reveal more about what I know (or do not know).
@@freename I don't think I agree that you know nothing about DHCP, but the option to turn it on and off was right there and you missed it.
@@jayneleennno That is very true :) I did. Right there, and I noticed about a week later; sadly no way to edit the video part of videos once posted :(
@@freename No issue. It's probably a moot point anyway, as for some reason even when I turn DHCP off on mine I can't use it as an AP. It registeres a new IP address, but nothing else. Maybe you could help expand on this?