Otophone

Поділитися
Вставка
  • Опубліковано 4 лис 2024

КОМЕНТАРІ • 12

  • @mistermurtad2831
    @mistermurtad2831 2 роки тому +2

    I have turned this into a 10M delta loop. I used the plate, two coils, two CB solid whips, a jumper of 13 feet with two mueller 20amp clamps and a 2:1 balun. It works great.

  • @jayleeper379
    @jayleeper379 13 днів тому

    Nothing was shown about how to fine tune coils and antennas… and how about using this as a center fed dipole? Does height above ground. make a difference?

  • @johnpeterson7264
    @johnpeterson7264 2 роки тому

    I’m thinking I could use these to make a tunable loop - connecting the top ends of the whips with a line across the center to form a closed triangle -.

    • @mistermurtad2831
      @mistermurtad2831 2 роки тому

      I did this to create a 10M Delta Loop. I used 2 coils, two CB whips, a 13 foot jumper with Mueler 20 amp clips and a 2:1 Balun. Works well.

  • @samhanie
    @samhanie 4 роки тому

    Can the Otophone Base be grounded to earth?

  • @haydenfoy3
    @haydenfoy3 3 роки тому

    Do you have to use the mini coils or can you use the bigger ones?

  • @AndrewMurphy8383
    @AndrewMurphy8383 3 роки тому

    JUST A THOUGHT YOU MIGHT WANT TO SALE THE WIPS BY THEM SELF TO

  • @thomastaylor6687
    @thomastaylor6687 6 років тому +1

    Do both coils have to set at the same length? Which one first? Antenna meter needed? Little more about the whips? Came away with a lot of unanswered issues.

  • @gsansoucie
    @gsansoucie 5 років тому

    Wow, I could mount this on my chimney and almost get a 40m antenna, I noticed it was a little short for the CW portion which is the only mode I use. Would I need longer whips? Or was there more taps in the coils that you didn’t show?

  • @elkhartcountyskywarn2879
    @elkhartcountyskywarn2879 4 роки тому

    I sent you an email to see what you would recommend for my situation.
    Thanks. Rick kd9fct