GOPR0115on board Glen Tanners Ducati 998s in race 4 of the shorai international meeting

Поділитися
Вставка
  • Опубліковано 9 лис 2015
  • Hampton downs October 2015

КОМЕНТАРІ • 29

  • @kostasevia
    @kostasevia 4 місяці тому +1

    Epic bike …!!!
    For real rider..!!!
    I think new rider can no get start this beauty…!!!!

  • @shamwarrie
    @shamwarrie 6 років тому +5

    I had an adrenaline rush watching that. Great stuff mate. I need to get the 900SS or 996S out on the track now.

    • @glentanner7100
      @glentanner7100  6 років тому +1

      shamwarrie please you enjoyed it. More to come soon. Going to the dyno tomorrow with a race built engine in the same bike.

    • @shamwarrie
      @shamwarrie 6 років тому

      I need some ideas for the 900SS. I have 41mm Keihin flatslides fitted and Ohlins in the rear as the original was no good at all. It drove wide coming out of corners as the ass end was squatting, not enough rebound, but the ohlins fixed it. Just need more hp and besides doing major engine mods don't really know what else. Maybe rebore to 944cc. Thanks mate.

    • @glentanner7100
      @glentanner7100  6 років тому +2

      shamwarrie bolt a 1000ds in there. There the best 2 valver. Custom front fork internals will do wonders for your bike and possibly more than the rear shock did. Enjoy!

  • @bikeartchannel
    @bikeartchannel 3 роки тому +3

    nice old ducati...i like classic bike, nice post

  • @robertharrold4214
    @robertharrold4214 6 років тому +2

    A plate of olives for you sir.

  • @glentanner7100
    @glentanner7100  7 років тому +2

    Just a play day and usually run a minimum plus 2L

  • @petritis-
    @petritis- 11 місяців тому +1

    💥❤🌹💥👋

  • @belvedere98
    @belvedere98 2 місяці тому

    Nice riding, is this a stock 998S? Have you done any work on the engine?

    • @glentanner7100
      @glentanner7100  2 місяці тому +1

      Was stock then. You can hear the main bearings wining in the video. Full race rebuild done now, and one day perhaps another video!

  • @doca8792
    @doca8792 4 роки тому

    Hardly even 500 rpm between the gears? Is that tach accurate?

    • @glentanner7100
      @glentanner7100  4 роки тому +2

      Tach was standard. Got a stack one on now so next vid will have that. Perhaps a little slow to respond but the quick shifter definitely speeds up the changes

    • @GGXjimmy
      @GGXjimmy 3 роки тому +1

      short ratio box in the sport models

  • @paoloporcelli5575
    @paoloporcelli5575 3 роки тому

    Quanti muri ci sono in questa pista?

  • @glentanner7100
    @glentanner7100  6 років тому

    Mmmmm olives!

  • @robertharrold4214
    @robertharrold4214 4 роки тому

    most of these types of ducatis have 15 or 23,ooo miles on the clock. Other bikes 33000.

  • @08halit
    @08halit 5 років тому

    have seen ppl do a 2 way hayabusa engine to a v8 would loove to se 4 of these smashed to gether to make a v8 with flatplane crank

  • @earljava5014
    @earljava5014 4 роки тому

    should be much higher up the revs in the corners - lazy gears .....

    • @375GTB
      @375GTB 11 місяців тому +1

      FAHRT!

  • @sve2727
    @sve2727 4 роки тому +1

    Effortless

  • @shaneweightman
    @shaneweightman 5 років тому

    How boring is track racing, open the throttle change 2 gears ram on the brakes open the throttle change two gears ram on the brakes ,,, makes me wanna fall asleep ,,,, road racing circuits that’s the place

    • @Mattdpayme
      @Mattdpayme 5 років тому

      shaneweightman to practice cornering .... 🤔