Such a refreshing channel , I watch many motorbike channels on UA-cam . They all seem to start off humble then before you know it they are all big time Charley's out of touch with normal bikers. Keep up the good down to earth work .
Eyup Baz I can't get my head round how futuristic that design was all those years ago it really stood out from the crowd . You're doing a great job in saving an important piece of motorcycling history can't be that many left now , really looking forward to the first rideout si de next time pal 👍👍👍
Another cracking video mate, she’s not a million miles away from being done, it’s a credit to you !! I must admit I was secretly pleased the rear tyre wouldn’t go back on as I just know you’d have set off to Scotland with it on, having ‘pretended not to see the cracks’….. keep up the great work and thanks for the mention, you’re not so bad yourself… 😉
😂 I was just clowning about mate I wouldn't have ridden on that tyre haha. Great tip with the brake cleaner deserved a shout out. 👍👋 See you soon chief.
@@SpecialisedMotorcycleTransport same headlight motor ( with the exception of built in relays) Mazda mx5 miata. Dodge stealth , and Mitsubishi 3000gt. But they have made a left and right motor strangely for each side of the car ,depending on which side of the road u drive.
Also Baz be wary when you first start to corner with the pdf units - it’s a little strange the feeling of pdf unit as normal bikes u brake hard prior to corner and get the satisfying dip of the front end. It’s not so apparent with the pdf and very unnerving braking in a corner. It’s ok when you know the bike. Make sure pdf on same setting cheers Shane
This motorbike is in the right place your time and patience and the cash your spending is worth it we'll done baz im from Irvine near Glasgow i will meet up with you and Billy to work on your Scottish accent 😅😅😅
Go go go, looking extra good. I was trying to remember what piqued my memory so much about this bike and it came eventually - Jack Shit and his ‘crew’ from Bike magazine in the early 80’s (in place of Ogri) I still have some of the t shirts and a silver ‘shithead’ pin 😁
A up mate my neck of the woods Newark on Trent I live as the crow flies 1/2 mile from the show ground great vid mate if it was me an old oil rag and just ride it
Great content this dude! Properly come into you own with it now. I dont watch cos I'm supporting my bestest uncle anymore I just watch cos its good! PS who's the country band? Smiley ivy should get them on tour with them 🤣
Here you go buddy. He's away at the moment though. www.ebay.co.uk/itm/256444604412?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=mJRIYEO8SGe&sssrc=4429486&ssuid=BC4hdwO3QmW&var=&widget_ver=artemis&media=COPY
Good day sir. All the way from South Africa. Where can I talk to you about spares? Building a Suzuki Katana Pop-up myself. Need light control unit and the duck tail for number plate light. I don't have a light unit control box at all so need one even if it is broken just to see how it is made and wired. Do you have any spares for sale maybe? Love the channel. Thanks Leon From Capetown South africa.
Thank you sir. We don't have a light control module spare but I do have the plans you need to build one of your own. If you send us an email through our website link in description I'll forward the plans to you when I'm at the pc next. 👍
@@shanerobertson6267 Good day sir. I have 8 wires. Do not have the unite at all on the bike and never got it with the bike. But there is 8 wires going to the plug or light direction. But thank you for the information sir. Much appreciated.
Such a refreshing channel , I watch many motorbike channels on UA-cam . They all seem to start off humble then before you know it they are all big time Charley's out of touch with normal bikers. Keep up the good down to earth work .
Thank you for the lovely comment. 😁
That means a lot to me. 👌
Loving the wry smile and little love tap when you know she's coming together..keep it up lads.
Eyup Baz I can't get my head round how futuristic that design was all those years ago it really stood out from the crowd . You're doing a great job in saving an important piece of motorcycling history can't be that many left now , really looking forward to the first rideout si de next time pal 👍👍👍
I agree mate they really wanted it to look like it was from space eh?
Thanks buddy. 😁
@@SpecialisedMotorcycleTransport Fit for any superhero 😎imo !
Another cracking video mate, she’s not a million miles away from being done, it’s a credit to you !! I must admit I was secretly pleased the rear tyre wouldn’t go back on as I just know you’d have set off to Scotland with it on, having ‘pretended not to see the cracks’….. keep up the great work and thanks for the mention, you’re not so bad yourself… 😉
😂 I was just clowning about mate I wouldn't have ridden on that tyre haha.
Great tip with the brake cleaner deserved a shout out. 👍👋
See you soon chief.
The smile on your face ayery time you operate the flip light is priceless
That's the child in me .. I actually want to giggle like a girl.. 😆
@@SpecialisedMotorcycleTransport same headlight motor ( with the exception of built in relays) Mazda mx5 miata. Dodge stealth , and Mitsubishi 3000gt. But they have made a left and right motor strangely for each side of the car ,depending on which side of the road u drive.
Also Baz be wary when you first start to corner with the pdf units - it’s a little strange the feeling of pdf unit as normal bikes u brake hard prior to corner and get the satisfying dip of the front end. It’s not so apparent with the pdf and very unnerving braking in a corner. It’s ok when you know the bike. Make sure pdf on same setting cheers Shane
Looking great . You're on the home straight.
Super interesting to see you rebuild the old Katana". I look forward to seeing it run.
Good to hear the great story develop. Looking forward to the road test 👌
Great job on the bike baz 👍
Fantastic watching you restoring that bike on a budget.
I used to have one of those. The only bike I didn't sell. It was stolen 😢 I loved that bike. So different.
That looks well. Can't wait to see it finished. Well baz not an easy job. 👌❤️
That song u were singing the them sing it. 😂
Only if you leave me some brake cleaner 😂
Getting there now! 👌I wondered who they were……Smiling Ivy 😉 Awesome
Their new single is linked in the description Chris.
Give them a like and comment please and mention us. 😁
Another great video 👍👍 Not far off now, looking forward to seeing you up in Scotland on it 🏍🤞
Top quality channel, great work as usual fella👏🏻👍🏻🇮🇪
great job baz gettin there keep up the great work next video please
This motorbike is in the right place your time and patience and the cash your spending is worth it we'll done baz im from Irvine near Glasgow i will meet up with you and Billy to work on your Scottish accent 😅😅😅
Thanks Richard.. You mean Billys accent? 😉😂
Coming on nicely. 👍🏻
It’s me again get some fine wet and dry on the screen then buff up with the polisher
Go go go, looking extra good. I was trying to remember what piqued my memory so much about this bike and it came eventually - Jack Shit and his ‘crew’ from Bike magazine in the early 80’s (in place of Ogri) I still have some of the t shirts and a silver ‘shithead’ pin 😁
He sounds like a classy guy. 😂
You'll have to send us pics of the t shirt mate..
Your mug is on its way by the way Kevin. 👍😁
KEEP THEM COMING BLOODY GREAT WATCHING THE KATANA COMING ALONG WELL DONE BUD PETE NORTH WALES
Been looking out for this post
A up mate my neck of the woods Newark on Trent I live as the crow flies 1/2 mile from the show ground great vid mate if it was me an old oil rag and just ride it
Get some mequirs ultimate compound for the drill polishing, it’s good and easy to use 👍🏻
Great work 👍👍👍👍👍👍
Its getting there 😊😊😊😊😊😊
Nearly there and it’s looking epic
Fingers crossed it'll run OK?
Did you like the clip at the beginning?
@@SpecialisedMotorcycleTransport yea I hope it runs but it’s looking absolutely amazing I know why he wanted that bike now
Great content this dude! Properly come into you own with it now. I dont watch cos I'm supporting my bestest uncle anymore I just watch cos its good!
PS who's the country band? Smiley ivy should get them on tour with them 🤣
Ah thanks dude that means a lot to me. ❤️👌
Ohhh top tip with the Wurth cleaner. I'm fed up with the muc-off bottles packing up! Do you have a link for the Wurth stuff?
Here you go buddy.
He's away at the moment though.
www.ebay.co.uk/itm/256444604412?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=mJRIYEO8SGe&sssrc=4429486&ssuid=BC4hdwO3QmW&var=&widget_ver=artemis&media=COPY
@@SpecialisedMotorcycleTransport Great stuff, thanks.
Top watch again Baz,By the way when did you learn to sing🤔🤔🤔🤣see ya soon Buddy 👍👍
I think it's obvious I never learned. 😂
Subbed
Good day sir. All the way from South Africa. Where can I talk to you about spares? Building a Suzuki Katana Pop-up myself. Need light control unit and the duck tail for number plate light. I don't have a light unit control box at all so need one even if it is broken just to see how it is made and wired. Do you have any spares for sale maybe? Love the channel. Thanks Leon From Capetown South africa.
Thank you sir.
We don't have a light control module spare but I do have the plans you need to build one of your own.
If you send us an email through our website link in description I'll forward the plans to you when I'm at the pc next. 👍
EBay see if you have 8 pins or 9 pins module usually 9 pins white bike 84 and . 8 pins silver 85 generally . Search Gsx750se or gsx750sf pop up katana
@@shanerobertson6267 Good day sir. I have 8 wires. Do not have the unite at all on the bike and never got it with the bike. But there is 8 wires going to the plug or light direction. But thank you for the information sir. Much appreciated.