Reading & Programming BMW CAS4 CAS4+ With VVDI2 By OBD Cable

For any question, do not hesitate to contact us through:
Email: [e-mail]
WhatsApp: + [phone]
Skype: [e-mail]
Or visit us:
www.mk3.com/
/ emirateskeys
/ emirateskeys

[@bobbaxter952]

Where did the key in position 7 appear from?The video cut for a second at that point? :-)Also,when you read key info if there are only the two original keys in position one and two then you know you have to unlock it?
And if you see 3,4 keys you 'know' it's been unlocked before by someone else??Is that correct?

[@emirateskeys]

For further information, please contact us on WhatsApp: [phone]

[@bobbaxter952]

Why do you have to put new key to sensing area to start the car?

[@emirateskeys]

For further information, please contact us on WhatsApp: [phone]

[@youssoufdiallo6755]

Merci beaucoup pour le vidéo ce vrement intéressant

[@emirateskeys]

Thank you .

[@linasvilciauskas8738]

Hi. Like this video. Got VVDI2 but done only 1 key for e90 cas3+. Key was aftermarket not oem. After making dealer key got immo light on the dashboard, - key works 100% but how to reset immo light? I am gonna try to make cas4 key for 5 series bmw - wd aftermarket key work? I will follow your video step by step - I hope it will work... Thanks for your answers in advance!!!

[@dashtyATG]

Hy bro what year you have done with it so far?

[@otoanahtar8368]

Kodlama bittikten sonra kumandanın bagaj tuşu ve araç içerisinde kitleme açma tuşu kodu siliniyor Yani tam başarılı değil Yapmak isteyenlere duyurulur

[@emirateskeys]

mükemmel çalışıyor
problem yok

[@dankey9095]

Perfect job Thanks.

[@Saqib.S]

That only works for virginized keys or used ones also?

[@buildindian8169]

Can you do key programming all keys lost on my bmw f80 using team viewer ?i already have the isn

[@emirateskeys]

please contact technical support team for help
[phone]
[e-mail]

[@abdulnoor1859]

I have done same now remote not working car only start when key near steering column

[@davidprochnow6658]

I had the same problem, anybody have an answer?

[@bimmerhacks]

@@markoscarelectrician5466 Make sure the frequency of the new remote is same as the old one. You also need to sync the Key with different procedure for different models. If you are talking about the Comfort access and keyless start, then its because you need to disable one of the comfort access keys so that the new key gets the priority to open with comfort access. Disable the keys that you no longer use or which has been lost. You can Re-enable it when you find it later on.
Too old post but it might help some one !!!!

[@mcdlol6]

@@bimmerhacks this is helpful brother thanks!

[@dashtyATG]

@@bimmerhacks very good answer thank you.
I had a few customers came to me with the exact same issue whil some of the remote had to be hold near the ignition button for few min.
How can i get in tuch?

[@jqhsbdbldoofsh]

HI
please 12 hours or 12 minutes ??

[@legitlocksmith7361]

Is it safe to do on vehicle via obd? 100% no risk?

[@igorsemenov8834]

Risk 50/50 :)))

[@motosystemltd]

Depends on the soft in cas, from cas 3+ upwards bench method recommended (soldering into chip)

[@notinrange7002]

What about all keys lost ?

[@emirateskeys]

you need VVDI PROG to read ISN

[@angkeyobd4395]

@@emirateskeys Thanks for video , yes abaut all key lost ???

[@emirateskeys]

you need VVDI PROG to read ISN

[@fuckfak7988]

@@emirateskeys read isn by obd or must ecu put out on table?

[@dashtyATG]

Good to see that I'm also on my way soon to smash it.

[@buyan_off]

Do you need additional power to the car?

[@emirateskeys]

Hello Dear,
it doesn't need a power .

[@angkeyobd4395]

@@emirateskeys Thanks for video , abaut all key lost ???

[@fazbari3187]

Do you think AVDI is better than this

[@emirateskeys]

Abrites is more professional .

[@angkeyobd4395]

@@emirateskeys Thanks for video is very clear add key cas4 thanks again , yes i have vvdi prog , I also have AVDI BMW and I look forward to the next update read ISN directly on obd and maybe next keys programing . Thanks . abrites.com/en/news/news-about-our-products/ABRITES-DIAGNOSTICS-FOR-BMW

[@stevesimkins3918]

For spare CAS3 keys AVDI great . But doesn't have this feature and i gave up doing F series and bought autohex

[@dashtyATG]

@@angkeyobd4395 hy brother nice.
is it available right now

[@DFWAuto_Hack]

@@stevesimkins3918 how is autohex. Where did you buy it?

[@hussam_electronic6392]

Hello dear this programming is lost or added and thank you

[@allkeylost9347]

To program the BMW key you need isn. Isn is stored in the working key and dme / dde. Vvdi on obd cannot read dme / dde.

[@mcdlol6]

@@allkeylost9347 so what’s the best way to do akl?

[@dashtyATG]

@@allkeylost9347 good info thanks

[@lacletronikelectronik3858]

hello, totally lost key on serie f it works?

[@emirateskeys]

you need VVDI PROG to read ISN

[@myjohnplatt]

Does it work with all CAS4?

[@abdeladimehssaini6664]

Wich car ? f20 2012 ?

[@emirateskeys]

For more details, you can contact us via WhatsApp.

[@stevesimkins3918]

The clock shows it taking hours ? Surely not

[@ionutdanica]

12min

[@stevesimkins3918]

@@ionutdanica that's great but still do backup 1st

[@mb0782]

Hello broo.., not safe make cas4 from obd2 ;D

[@emirateskeys]

Adding key is safe.
Just make sure that the device is stable and the battery is also stable.

[@romankahun2764]

12 hour ?

[@ionutdanica]

12min