Thank You, Thank You, Thank You! I almost brought my Mackie DL32R to a service centre. Thanks to your post I had my (huge) problem solved within a few minutes!
Thank you so much for putting up this wonderful video. My Macke dl32r had a major output failure at the gig on Sunday and I was able to isolate and fix the problem with your advice. You rock and you’re keeping us playing, too! Thanks again!
Michael, thank you very much for taking the time to make and post this video. We were able to fix the same issue on the input side with one of our channels. All is working as it should now. Many thanks.
aaaaah this may explain the issue Ive been having with some of my outputs where it sounds like there is a gate on them where they cut in an out with the volume of the output
So I have a 16 and opened it up hoping to see the same layout sans channels etc. Well its nothing like the 32. Can you do a video on doing the 16. Thanks
I think it depends on a few factors, like humidity where you live, where the mixer is stored, how often it is transported. I'm in relatively dry Colorado, and have reseated and cleaned the ribbons twice since 2015.
@@WoodlawnSound I bought new last week and it had problems with ribbon A. I saw your video and avoid to send to guarantee cause I live far away from Buenos Aires in Argentina. It works excellent now!
I only asked because I’m having the same issue. All my devices connect and operate fine but my Wi-Fi led stays red. Contacted Mackie and tried all their suggestions but still the same. Please let me know if you find a fix. Great video and thanks for doing what you do. Really appreciate it.
Hey Michael, I just wanted to say Thank you. I took the time to look into my DL32R and followed your instructions and BOOM I got my headphone output back, my 13L and 14R main output back and all outputs sound the same. Once again Thank you very much!!!
Thank you Mike! I probably wouldn't have dared to take a look inside, and instead sent to Mackie- this video saved us downtime, much appreciated!
Thanks so much for watching!
Thanks - that’s my job for today! Nice to have a quick guide to talk me through it and show me the correct ribbon cable.
Thank You, Thank You, Thank You! I almost brought my Mackie DL32R to a service centre. Thanks to your post I had my (huge) problem solved within a few minutes!
It's may 2022 and this video just saved the day. Thank you so much from NC. Well done
Great to hear!
My headphone output on my dl32s stopped working. You wouldn't know how to fix that one would you?😉
Thank you so much for putting up this wonderful video. My Macke dl32r had a major output failure at the gig on Sunday and I was able to isolate and fix the problem with your advice. You rock and you’re keeping us playing, too! Thanks again!
Great to hear!
Michael, thank you very much for taking the time to make and post this video. We were able to fix the same issue on the input side with one of our channels. All is working as it should now. Many thanks.
Excellent! And thanks for letting me know it helped!
THanks, Michael - we appreciate your tips! CJ @ Mackie
gracias amigo! me empezaron a fallar varios canales, pero los logre solucionar con un poco de aire!
Te fallaban canales o auxiliares?
Late to the party, but thanks so much for this. It helped me greatly!
Glad it helped!
aaaaah this may explain the issue Ive been having with some of my outputs where it sounds like there is a gate on them where they cut in an out with the volume of the output
Gracias por el consejo, de casualidad se podrá hacer lo mismo con las entradas de micrófono?
Si!
Michael you the best man
Is the product used called "Precision contact cleaner" by "sprayaway" brand?
Yes, that's what I had onhand. I'm told DeoxIT works very well.
So I have a 16 and opened it up hoping to see the same layout sans channels etc. Well its nothing like the 32. Can you do a video on doing the 16. Thanks
So, my DL32R is having this issue as well. What is spray you used??
Nevermind, I saw the comments. My mixer is probably what.....7 years old now. It's time to clean it and reseat stuff. Have some DeoxIT coming.
Thank YOU Michael!
What would cause the 2 1/4 monitor outputs to go out completely?
Hi Michael. Thank you for then info. Do you know often this happens? I mean I clean it now, when would Appear again? Approximately
The idea is to make periodic maintenance
I think it depends on a few factors, like humidity where you live, where the mixer is stored, how often it is transported.
I'm in relatively dry Colorado, and have reseated and cleaned the ribbons twice since 2015.
@@WoodlawnSound I understand, thank you very much
@@WoodlawnSound I bought new last week and it had problems with ribbon A. I saw your video and avoid to send to guarantee cause I live far away from Buenos Aires in Argentina. It works excellent now!
Hi, network led is red in the video, is it supposed to turn green when a device is connected? Like your ipad
Good eye, yes that is correct. Maybe it was red because my cover was off (?)
But as you can see in the video, the iPad was connected OK.
I only asked because I’m having the same issue. All my devices connect and operate fine but my Wi-Fi led stays red. Contacted Mackie and tried all their suggestions but still the same. Please let me know if you find a fix. Great video and thanks for doing what you do. Really appreciate it.
Hey Michael, I just wanted to say Thank you. I took the time to look into my DL32R and followed your instructions and BOOM I got my headphone output back, my 13L and 14R main output back and all outputs sound the same. Once again Thank you very much!!!
Are they becoming unseated or is it corrosion on the pins ? 🧐
They become unseated. It sure would be great if someone could offer a fix for this. It's the one and only issue I have with the DL32R.
Thank you Thank you!
You are so welcome!
Thanks!!
please which cleaner did you use?
I had some industrial cleaner on hand; but most people use DeoxIT.
Best of luck to you!