Great job, that is awesome. Only problem is when I watch your videos my wallet gets lighter and lighter. I’m still waiting for the air ride system to come in. Thanks again!
Hey Bruce...haha thats great man..youre going to love that air ride. Takes a few trips out to get used to where you need it but after that its like second nature.
I just add the latitude light and I have watched a lot of video but I am sticking to sikk baggers because they take the time to get most of the information and the little thing mentioned. thank you so much
Awesome video, while I was installing Ciro bag blades a friend installed this taillight. I have more respect for his work helping me, like you said not hard just takes time. No lift here just a gravel driveway on the jiffy stand. You will get a lot of comments as it really completes the back of the bike. Thank again
Hey Jeff...been there buddy. I still use my jacks quite a bit and man my old back lets me know it too. Hurts for days after laying on the ground lol. I dont know how many of those refelctors Ive pulled by just laying in the gravel or on the concrete and reaching up in there and taking those 2 bolts out lol
nice! 3 hours ain't bad on a kickstand man...those 2 bolts on the plate kinda suck to get to even on a lift..I've done many "reflector removals" on kickstands...which still require you to remove the whole assembly ..glad you got it knocked out!
Damnit Steve... You're costing me money. I already ordered the Ciro filler panel lights, now I was this one too. Anything to make my black SGS just look a little bit different.
Another great vid Steve! I am really liking the way the Whiskey Project is coming together! That light/plate combo looks awesome. Totally changes the look on the rear. Definitely doing this! Thanks again brother and keep ‘em coming.
Great content. I love the new wrapped look, and the brake/ blinker assembly matches the style of the bike.(maybe HD should take note and install it from the factory.
As usual a helpful Video I think it could work with Electra glide standard and Ultra if you hook it up to custom dynamics triple play I’m not sure but I think. Thanks Steve
Great video Steve as always ,on day I'll have a street glide. I have a Fatboy at the moment. I have made lots of changes ,I love saving money to do it. Summer will be here soon . Mark (in London)
Hey Marc!! I sold my fatboy for my first bagger a few years ago..man I miss that thing to. I thought it was a big heavy bike before I got the Street Glide lol Man I wish I had that back. Summer is right around the corner my friend! Were in the home stretch now! Be safe man.
@@sikbaggers I'll send you a picture on FB found you on there. I'm going to at some point lower the back and put better boxes on. Try and make the back end look like a bagger. Being 6'7 and 20 stone I'm never going to be comfortable lol
Hi Steve. The fitment from Ciro3d includes 2022 Road/Street Glide ST models, which have center tail light. Not sure if these are different from older models with center tail light that you mentioned as not fit?
yeah they have a few relocation kits on the market but man they are pricey. Not a fan of the price tag at all. But thats about the only way I have seen the ultras flipping the plate to under the lights.
Thanks for the reply. I’m thinking of just drilling a couple holes under the tail light and mounting a curved or lay down tag mount. Thanks again for the reply. Enjoy all the video content.
Hey Nick...cool man...pretty easy fix on the 14 up bikes...installed some load caps on the older bikes and its not too bad but not as easy as running the hazards lol
If you raise the bike all the way up on the air ride or center stand on the lift you have way more room to work to get the old light off ! I took me to different installs to realize this !
agreed....in the video it is raised up all the way but I have 1 inch lowering blocks on there so that didnt help lol ...I cant count how many of these ive pulled that light bar off just laying on the ground with no jack just to get that reflector off ,...suuuucks!
Hey Steve, thanks for all your videos, sincerely! If you have mentioned this already my apologies, what pipes are on the road glide you’re working on? Thanks
Hey Marc...I put Vance & Hines dresser dual headers and Rush Racing Big Louie 4" slip ons on this one. I ran the rash racing pipes on my SG with cobra powerport headers for along time and loved the low end rumble before I switched to No cut out bags and custom turn down exhaust. I had no doubt what slip ons I was going with on this build ...the rush racing pipes sound awesome.
@@harley1793 Hey Marc..I thought I replied to this so if it shows up later sorry lol but I got them from revzilla. Ive ordered off and on from them and no issues and pretty standard pricing across the board.
I put these on my 2019 street glide and followed your instructions for resetting the ecm for hyper flashing and it did not reset, I tried several times could it because I also put Ciro tail lights and the vertical lights on the fender?
Thank you sir! I picked this seat up from a buddy. Its actually the 2018 Harley CVO seat with orange stitching. Ive ordered the matching backrest 2 times from HD now and both time they have came in with crooked stitching on them. Can you believe that...crooked from HD lol twice! Soooo I am on my third order now and waiting.
I've been debating installing this Latitude with the filler and bag blades.... curious how it would work with the led strobe module like Custom Dynamics Magic Strobe....
I have it hooked up with this combo, however the bag blades, because they are sequential need to be plugged in after the strobe box...the strobe and sequential do not work together.
I’m putting Ciro 3 Fangs on the rear of my 2020 Road glide.Is it ok to install them on the rear while I still use the stock bulbs on the front signals. Eventually I would like to do Ciro on the front signals and headlight..thx
Steve, I already have the Ciro taillight which I didn't install. I need to just replace my plate because I ordered a personified. The little nut at the bottom, will it allow me remove the cover and plate?
Steve Great video definitely like the look of that lite it looks awesome had a question for you on the air ride is there a way for a normal installation with the compressor with my filler lights on my 16 classic thank you for all you do for us brother
@@michaelterry885 hhmm thats a touch one man...the bracket that goes in there is very thin but I dont know how much room you have to work with in there. I would call DIRTY AIR and see what they say..Im sure you are not the first to ask and maybe they have actually tried to do it. They are pretty cool and can answer your question better than i can on something like that.
Hi Steve, can we fit the license plate without the outside frame? If not, is it possible to adapt the straight original license holder to this tail light? Thks, Kev
yeah short answer is you cant ...this replace the dogbone style bullet blinker system on the bike now..the dominator rear fender is not drilled out for that and the wire harness cannot support this light
basically the strobe is already built into this light. A magic strobe simply turns the light off and on in patterns...so if you plug this in before the magic strobe it will work like its designed and the rest of your lights will strobe. If you plug it in after it will not work correctly as its designed
Yes watch the part here at 2:41 and youll see there will be a foam plug that goes in there and the you put your plastic cover back on your tribar light and that holds it in. If you dont have the plastic cover just clean the light really good and stick black gorilla tape over the hole to keep water and debris out.
When I hook my latitude light into the connector for my custom dynamics bag blades. The right turn signal on the tail light doesn’t work. Any idea why?
sounds like a default light...did you try it without the CD blades just to see if it worked correctly then? Id start there and eliminate potential issues as you go...ive had a mix of ciro and CD and had no issues...it all works fof the same molex connectors so im not sure what would cause this.
SIK Baggers yea, I’ve tried just the bag blades and just the tail light. When it’s just one or the other, everything works great. But, both together and the right turn signal stops working.
There are none on thre market for the extended fencer. If you want vertical lights check out custom dynamics plasma rods...they fit between the bag and the extension.
Great job, that is awesome. Only problem is when I watch your videos my wallet gets lighter and lighter. I’m still waiting for the air ride system to come in. Thanks again!
Hey Bruce...haha thats great man..youre going to love that air ride. Takes a few trips out to get used to where you need it but after that its like second nature.
I just add the latitude light and I have watched a lot of video but I am sticking to sikk baggers because they take the time to get most of the information and the little thing mentioned. thank you so much
Awesome video, while I was installing Ciro bag blades a friend installed this taillight. I have more respect for his work helping me, like you said not hard just takes time. No lift here just a gravel driveway on the jiffy stand. You will get a lot of comments as it really completes the back of the bike. Thank again
Hey Jeff...been there buddy. I still use my jacks quite a bit and man my old back lets me know it too. Hurts for days after laying on the ground lol. I dont know how many of those refelctors Ive pulled by just laying in the gravel or on the concrete and reaching up in there and taking those 2 bolts out lol
Great video steve I would like to buy one sometime in the in the next few months take care an god bless
Thank you Ben! Yes sir really cleans up the back of the bike..nice and sleek and man its bright!
Absolutely Love it!!! Its on the list to go on my Road Glide thanks for the great video!!! you make it all look so easy lol
That list never ends LOL
I've had this on my bike for a year now and I absolutely love it. I always get complemented on it
Yo Steven I finally installed mine. It looks great and it only took me three hours in the driveway on the kickstand at midnight lol
nice! 3 hours ain't bad on a kickstand man...those 2 bolts on the plate kinda suck to get to even on a lift..I've done many "reflector removals" on kickstands...which still require you to remove the whole assembly ..glad you got it knocked out!
Damnit Steve... You're costing me money. I already ordered the Ciro filler panel lights, now I was this one too. Anything to make my black SGS just look a little bit different.
LOL I get that a lot Michael! This combo does look pretty awesome...had this set up on both bikes until I switched rear fenders
Installed this last week I used a 5gal propane tank to do the bend in the license plate but the way you did it also works nice.
haha thanks man...im working on getting a bigger torch but this works for now
Thanks Steve vid was a big help to install this light .
I'm from uk
Thank you Alan for the kind words sir. Im glad the video helped you!
Another great vid Steve! I am really liking the way the Whiskey Project is coming together! That light/plate combo looks awesome. Totally changes the look on the rear. Definitely doing this! Thanks again brother and keep ‘em coming.
Hey Kevin..yes sir agreed! The nice sleek look with a curved plate...had to beat man.
Great content. I love the new wrapped look, and the brake/ blinker assembly matches the style of the bike.(maybe HD should take note and install it from the factory.
Yeah I agree..the old bullet or flat style blinkers are getting old...found on every HD model these days
As usual a helpful Video
I think it could work with Electra glide standard and Ultra if you hook it up to custom dynamics triple play
I’m not sure but I think.
Thanks Steve
yeah im not sure either but when we get some bikes like that in here we will test it for sure
Need this for my 2023 chieftain
I think ciro has some lights for the indians...may check their website
Great video Steve as always ,on day I'll have a street glide.
I have a Fatboy at the moment.
I have made lots of changes ,I love saving money to do it.
Summer will be here soon .
Mark (in London)
Hey Marc!! I sold my fatboy for my first bagger a few years ago..man I miss that thing to. I thought it was a big heavy bike before I got the Street Glide lol Man I wish I had that back. Summer is right around the corner my friend! Were in the home stretch now! Be safe man.
@@sikbaggers yes I no what you mean,I have problems with my back so wouldn't be the best idea.
I would send you a picture but can't do it on FB
@@sikbaggers I'll send you a picture on FB found you on there.
I'm going to at some point lower the back and put better boxes on.
Try and make the back end look like a bagger.
Being 6'7 and 20 stone I'm never going to be comfortable lol
Great video I’m getting that and filler lights and bag blades I hope I can do it that looked pretty hard I have a 2016 Street Glide.
All u need now is the ciro3d filler panel lights I have them too and WOW
Yes I like those but I cannot run with the extended fender as they dont match the lines.
Awesome video Steve!!! Looks great!!
thank you Maurice!
Hi Steve.
The fitment from Ciro3d includes 2022 Road/Street Glide ST models, which have center tail light. Not sure if these are different from older models with center tail light that you mentioned as not fit?
Another great video thank you again, going to get my ordered.
Awesome video and having the same color and model bike, I believe I'm going to have to purchase one of these now since it does look slick!
Thanks Stephen ...yeah im diggin it now that it installed. I was iffy at first but I like it
Great video. Any ideas for putting something like this on my Road Glide Ultra? Looking to place my tag under the light. Thanks .
yeah they have a few relocation kits on the market but man they are pricey. Not a fan of the price tag at all. But thats about the only way I have seen the ultras flipping the plate to under the lights.
Thanks for the reply. I’m thinking of just drilling a couple holes under the tail light and mounting a curved or lay down tag mount. Thanks again for the reply. Enjoy all the video content.
Fixed my hyper flash! Thanx buddy!😎👍🏻💪🏻
Hey Nick...cool man...pretty easy fix on the 14 up bikes...installed some load caps on the older bikes and its not too bad but not as easy as running the hazards lol
If you raise the bike all the way up on the air ride or center stand on the lift you have way more room to work to get the old light off ! I took me to different installs to realize this !
agreed....in the video it is raised up all the way but I have 1 inch lowering blocks on there so that didnt help lol ...I cant count how many of these ive pulled that light bar off just laying on the ground with no jack just to get that reflector off ,...suuuucks!
Hey Steve, thanks for all your videos, sincerely! If you have mentioned this already my apologies, what pipes are on the road glide you’re working on? Thanks
Hey Marc...I put Vance & Hines dresser dual headers and Rush Racing Big Louie 4" slip ons on this one. I ran the rash racing pipes on my SG with cobra powerport headers for along time and loved the low end rumble before I switched to No cut out bags and custom turn down exhaust. I had no doubt what slip ons I was going with on this build ...the rush racing pipes sound awesome.
Steven Housden thanks for getting back to me sir! Where do you suggest I buy them?
@@harley1793 Hey Marc..I thought I replied to this so if it shows up later sorry lol but I got them from revzilla. Ive ordered off and on from them and no issues and pretty standard pricing across the board.
just bought 2020 Road Glide special, black, whats my best bet to black out all the screws that are machined
I put these on my 2019 street glide and followed your instructions for resetting the ecm for hyper flashing and it did not reset, I tried several times could it because I also put Ciro tail lights and the vertical lights on the fender?
Definitely a great lookin product!..
Yes sir, agreed! Thank you for checking out the video Andrew. Be safe man.
Steve-o great video as usual. Boss have a quick question what seat are you running on the whiskey project?? Looks sik 😂 rsfm
Thank you sir! I picked this seat up from a buddy. Its actually the 2018 Harley CVO seat with orange stitching. Ive ordered the matching backrest 2 times from HD now and both time they have came in with crooked stitching on them. Can you believe that...crooked from HD lol twice! Soooo I am on my third order now and waiting.
Thanks for the reply may have to try and find one looks great. Maybe what I need to reach the ground on my 19RGU. Thanks 🙏 again boss.
I've been debating installing this Latitude with the filler and bag blades.... curious how it would work with the led strobe module like Custom Dynamics Magic Strobe....
I have it hooked up with this combo, however the bag blades, because they are sequential need to be plugged in after the strobe box...the strobe and sequential do not work together.
I’m putting Ciro 3 Fangs on the rear of my 2020 Road glide.Is it ok to install them on the rear while I still use the stock bulbs on the front signals. Eventually I would like to do Ciro on the front signals and headlight..thx
Definitely need to switch to this. Much cleaner more styling look. Should be stock on the bike.
Agreed! I love it and it is for sure a custom look that will make your bike stand out!
Steve, I already have the Ciro taillight which I didn't install. I need to just replace my plate because I ordered a personified. The little nut at the bottom, will it allow me remove the cover and plate?
yes...remove the screw and just tilt it up and off..replace your plate and put it back on. Super easy.
Nice job 👏👍👌
Steve Great video definitely like the look of that lite it looks awesome had a question for you on the air ride is there a way for a normal installation with the compressor with my filler lights on my 16 classic thank you for all you do for us brother
Hey Michael...not sure man...where to filler lights actually mount to?
Steven Housden the filler lights mount between the bag and fender inside the fender brackets same place as compressor mounts go
@@michaelterry885 hhmm thats a touch one man...the bracket that goes in there is very thin but I dont know how much room you have to work with in there. I would call DIRTY AIR and see what they say..Im sure you are not the first to ask and maybe they have actually tried to do it. They are pretty cool and can answer your question better than i can on something like that.
Steven Housden ok Steve thank you for the idea appreciate you as always will call dirty air and j n r thank you for your reply god bless
Hey Steve get them to make one with amber indicators for Australia.Ive been at them for 6 months trying but no luck.
Hey Leo...Ill ask if they plan on making any, I know some of the stiff they have do have red/ember in them...Ill ask and see what they say.
@@sikbaggers cheers.
Hi Steve,
can we fit the license plate without the outside frame? If not, is it possible to adapt the straight original license holder to this tail light? Thks, Kev
The outside frame does hold plate in ...kinda sandwiches it...you may get creative and not use it though.
looks awesome thx 4 the vid.
Thank you David!
Hi i can install that product in the cvo fender or not
Steve, I like to be difficult man if I wanted to run this light with the Advanblack dominator fender how would I accomplish that?
yeah short answer is you cant ...this replace the dogbone style bullet blinker system on the bike now..the dominator rear fender is not drilled out for that and the wire harness cannot support this light
@@sikbaggers thanks for the insight, I may see what I can come up with though... to be determined.
I have the custom dynamic magic strobe box, will this tail light work with the magic strobe?
basically the strobe is already built into this light. A magic strobe simply turns the light off and on in patterns...so if you plug this in before the magic strobe it will work like its designed and the rest of your lights will strobe. If you plug it in after it will not work correctly as its designed
Steve, after the install it leaves part of the tri bar light unplugged. Did you leave yours open or did you put something in it ?
Yes watch the part here at 2:41 and youll see there will be a foam plug that goes in there and the you put your plastic cover back on your tribar light and that holds it in. If you dont have the plastic cover just clean the light really good and stick black gorilla tape over the hole to keep water and debris out.
Perfect, thank you sir and keep up the great work
🔥🔥🔥🔥🔥🔥🔥🔥
yeeeeeeeeeeeeahbooooooooooooooooi! 😜
Can you buy just the tail light?
Hello. Will this work with the Probeam tribar without issue?
Im sure it would...Just follow the directions on this light...as the pro beam is the same as the hd version...shouldn't have any issues.
I like the license plate bracket but I care for the lights. Good video tho
Thank you sir, yes its definitely a different look.
Will this light work on my 14 ultra limited? Will it require drilling the fender?
no unfortunately it wont work on the ultra limited without drilling new holes and the wire connections arent the same.
Steven Housden damn already purchased it
When I hook my latitude light into the connector for my custom dynamics bag blades. The right turn signal on the tail light doesn’t work. Any idea why?
sounds like a default light...did you try it without the CD blades just to see if it worked correctly then? Id start there and eliminate potential issues as you go...ive had a mix of ciro and CD and had no issues...it all works fof the same molex connectors so im not sure what would cause this.
SIK Baggers yea, I’ve tried just the bag blades and just the tail light. When it’s just one or the other, everything works great. But, both together and the right turn signal stops working.
I have this light. i changed it cause i hate the stock bar but I dont love it, it looks a little to much like a victory light. Just my opinion.
Hey Paul...Its definitely different but yeah better than the stock lights for sure. Im liking the sleekness of it though.
@@sikbaggers yes sir. Love the channel 👍
Does anyone know if they make filler panel lights for advanblack extended fender. Either ciro 3D or Custom Dynamics?
There are none on thre market for the extended fencer. If you want vertical lights check out custom dynamics plasma rods...they fit between the bag and the extension.
Got any discount codes for ciro.3d?
Im sorry I dont
@@sikbaggers thank you for the reply! I ordered my black headlight bezel for my SG. Great looking parts.
Looks too much like a Victory ass end, I'll stick with stock!