How to use your Automatic Wire Stripper and Cutter || VCELINK 2 in 1 Wire Stripper
Вставка
- Опубліковано 12 вер 2024
- This UA-cam video will show you how to use your VCELINK Automatic Wire Stripper and Cutter correctly.
🔥VCELINK Automatic Wire Stripper
👉𝐒𝐇𝐎𝐏 𝐍𝐎𝐖:bit.ly/45vUbAK
✅VCELINK 2 in 1 wire stripper strips accurately and cleanly on both solid core and stranded wires from 10-24AWG(0.2mm² -5.5mm² ).
✅VCELINK automatic wire stripper really makes stripping wires vastly easier and faster than traditional strippers.
✅Eagle nose pliers design can be used in narrow spaces. Automatic wire stripping pliers, adjust the cable length up to 20mm.
✅VCELINK 2 in 1 wire stripper works perfectly in audio and video electrical cables work also for automotive machine repair work and so on. Perfect for DIYers, engineers, and electricians.
FOLLOW US:
👉Facebook: / vcelinkofficial
👉Ins: / vcelink_official
👉Twitter: / vcelink
👉TikTok: / vcelinkofficial
Check out our shop!
► www.vcelink.com
#vcelink #wirestripper #wirecutter
If you have any questions or concerns, please feel free to make comment below!
If you think it's a useful tutorial, please LIKE and SUBSCRIBE to us!
😍Thanks for watching, see you next time!
▼What else is Worth Watching?▼
RJ45 crimping How to Install CAT6 Pass thru Ends || RJ45 Ethernet Cable Crimping Tutorial VCELINK
• How to Install CAT6 pa...
How to Use Punch Down Tool? (Only 8 Steps)|Detailed Instruction|Step by Step| VCELINK
• How to Use Punch Down ...
How To Terminate CAT 7 Category Cables - Easy Guide / Tutorial || VCELINK
• How To Terminate CAT 7...
The Most Detailed Brush Wall Plate Installation Tutorial |VCELINK
• The Most Detailed Brus...
How to Punch Down an RJ45 Cat6 Keystone Jack VCELINK
• How to Punch Down a RJ...
How to Make Ethernet Cable(Only 8 Steps!!) Work by Crimping Tool (2020) via VCELINK
• How to Make Ethernet C...
This is, without a doubt, one of the coolest gadgets I've ever come across. I consider myself to be an audiophile and have been fooling around with speakers over 60 years and this little tool is something. Just bought 2 more for Christmas gifts to friends. Highly recommended.
Thanks for loving our products. 🥰
Thanks! I just purchased one and wasn’t sure of the other features besides stripping. 👍
Glad the video helps you!
How to repair this@@vcelink1671
@@vcelink1671how to fix it if it gets damaged
How to adjust bite force without damaging the twisted-pair cable?
Got da same tool works well wid a certain gauge upwards but cable like alarm wire that's thin it tends to cut a lota copper strands out.
Hi, could you please check the red length adjustment button? This button can be adjusted to strip consistent stripping length.
Very helpful us thank you so much
Glad that you like it!
I bought one but it broke can you help me to fix it
Well, it can be very difficult to fix it once it's broken, because the repairing process can be complicated.
Can be use in utp cable?
Yes, it can be used for UTP cables.
I bought this. Actually i have to peel thin strip wire from middle. Every time i try to peel it from middle Many times it get break. Is there any setting of this gadget to peel thin wire from middle without getting break
Hi, please check if your wire is between 12 and 24 AWG. Then you can adjust the length limiter to strip the fixed wire and adjust the back tension adjustment button to increase the stripping force.
How to adjust bite force without damaging the twisted-pair?mine got damage
You can adjust the back tension adjustment button to increase or decrease the stripping force.
If u use 23 AWG like utp how to adjust bite force it is clock wise or counter clockwise?
@@eliseovdev2129 Turn clockwise to increase the stripping force. It depends on the current position. You can have a try for both directions.
Hi thank for your video. I am looking for repair video actually. I accidentally dropped a similar wire striper, and the top adjustor and 1 steel rod/cylinder came out.
I just couldn't fit them back. Could you show me how to, please.
TIA
Well, once the adjuster and steel cylinder came out, it can be very difficult to fix them as the repairing process can be complicated. And it may have differences from one brand to another brand. You'd better contact the supplier of your tool for help or just buy a new one.
I had the same problem, please help
I'll fix em for $25