Hello Troy, the steel bracket is required and mounts to the underside of the max mount with the included hardware, then the plastic shad base mount mounts to that which allows you to clip and lock the top case in place. Thank you!
Yes, you'll still need to remove the factory plastic splash guard so that you can mount the rack to the underside of the max mount with the included hardware. The reason we offer replacement aluminum splash guards for the "rally" models is because the rally fender is much smaller and water can spray the driver's booty in wet conditions. If you have the standard 900 you should have the full-length fender and water spray should not be an issue.
Can you adjust the suspension so you don't have to worry about bottoming out with a passenger or do you need to get new suspension? I know I can adjust the stock suspension with a tool.
The Rally Models have adjustable suspension. For the Non-Rally models we two products to address that issue here: www.slingmods.com/canam-ryker-lift-kits
if I have the ryker sport that includes the max mount already and I don't have the passenger seat installed, what will I need in addition to the Shad case to install it?
Hello Kim, this mounts to the underside of the Max Mount.. so nothing else is needed in addition to the Shad Bag Kit for installation. If you however would like a passenger seat down the road, you can either purchase one from Can-Am or upgrade to our Ultimate Seat here: www.slingmods.com/canam-ryker-custom-aftermarket-seats-ultimate?search=ultimate%20ryker Thank you!
Hello, yes you can keep your passenger seat on with this setup and it actually includes a backrest for your passenger. Here's more pics and info: www.slingmods.com/canam-ryker-top-case-luggage-system-shad
It is yes.. because you need access to the mounting holes underneath the max mount. We do have aftermarket splash guards here: www.slingmods.com/canam-ryker-water-shield-spyderextras
No, because you don't want plastic in between. It's imperative that it's metal to metal when fastening the bolts. We do however offer aftermarket splash guards here: www.slingmods.com/canam-ryker-water-shield-spyderextras
@@Slingmods Hi! I noticed the installation instructions for this item on your web site does not mention having to remove the splash guard. Is that a mistake?
@@jeancomeau8032 Hello Jean, the instructions provided on our website were provided by the MFG of the product, which is Spyder Extras. Their instructions start presuming that you've already removed the factory splash guard under the max mount. We do our videos as a guide to help people through the process of installing mods as the MFG instructions are generally quite vague. We go over the removal of the factory splash guard and the installation of the aftermarket metal splash guard by SpyderExtras in our video. Thank You!
Hello George, that is kinda silly we don't have that posted online. I hit up the MFG and should have an answer for you by tomorrow on the internal dimensions. The "external" dimensions appear to be: Width: 57cm / 22.44 inches Height: 31cm / 12.20 inches Depth: 42cm / 16.53 inches
❗❗Please note that due to popular demand the Shad Top Case Reflectors have been upgraded from Clear to Red. 🛒Can-Am Ryker Shad Top Case Luggage Kit available here: www.slingmods.com/canam-ryker-top-case-luggage-system-shad
Does this work with the side shad saddle bag?
I had the same question
Yes
hi there does this mount directly to the max mount with out using the supplied bracket.cheers troy
Hello Troy, the steel bracket is required and mounts to the underside of the max mount with the included hardware, then the plastic shad base mount mounts to that which allows you to clip and lock the top case in place. Thank you!
Would this work with out a second set
so if on the regular 900 classic do you still need to remove the splash guard?
Yes, you'll still need to remove the factory plastic splash guard so that you can mount the rack to the underside of the max mount with the included hardware. The reason we offer replacement aluminum splash guards for the "rally" models is because the rally fender is much smaller and water can spray the driver's booty in wet conditions. If you have the standard 900 you should have the full-length fender and water spray should not be an issue.
Can you adjust the suspension so you don't have to worry about bottoming out with a passenger or do you need to get new suspension? I know I can adjust the stock suspension with a tool.
The Rally Models have adjustable suspension. For the Non-Rally models we two products to address that issue here: www.slingmods.com/canam-ryker-lift-kits
if I have the ryker sport that includes the max mount already and I don't have the passenger seat installed, what will I need in addition to the Shad case to install it?
Hello Kim, this mounts to the underside of the Max Mount.. so nothing else is needed in addition to the Shad Bag Kit for installation. If you however would like a passenger seat down the road, you can either purchase one from Can-Am or upgrade to our Ultimate Seat here: www.slingmods.com/canam-ryker-custom-aftermarket-seats-ultimate?search=ultimate%20ryker Thank you!
I don't have or want a passenger seat does it just mount onto the max mount itself ?
Hello Wendy, the Shad Rack mounts to the underside of the "max mount". You don't have to run a passenger seat if you don't want to.
Does this shad bag work with the ultimate seat?
Yes it does. There's a pic here showing compatibility: www.slingmods.com/canam-ryker-top-case-luggage-system-shad
Do you sell just the luggage bracket separately? I already have a Shad case and mount plate from my old bike.
Hello John, these are sold as a kit only. My apologies.
Hey could I still keep my passenger back seat on with this or do I have to remove it?
Hello, yes you can keep your passenger seat on with this setup and it actually includes a backrest for your passenger. Here's more pics and info: www.slingmods.com/canam-ryker-top-case-luggage-system-shad
Is it totally necessary to remove the original splash guard?
It is yes.. because you need access to the mounting holes underneath the max mount. We do have aftermarket splash guards here: www.slingmods.com/canam-ryker-water-shield-spyderextras
Hi is it waterproof? I may have missed that Information.
Hello Susan, yes. These cases are rated for all weather conditions.
Could you pull down the splash guard, Mount the plate sandwiched with the splash guard? That way you still have the splash guard.
No, because you don't want plastic in between. It's imperative that it's metal to metal when fastening the bolts. We do however offer aftermarket splash guards here: www.slingmods.com/canam-ryker-water-shield-spyderextras
@@Slingmods Hi! I noticed the installation instructions for this item on your web site does not mention having to remove the splash guard. Is that a mistake?
@@jeancomeau8032 Hello Jean, the instructions provided on our website were provided by the MFG of the product, which is Spyder Extras. Their instructions start presuming that you've already removed the factory splash guard under the max mount. We do our videos as a guide to help people through the process of installing mods as the MFG instructions are generally quite vague. We go over the removal of the factory splash guard and the installation of the aftermarket metal splash guard by SpyderExtras in our video. Thank You!
What are the actual inside dimensions? Carry a laptop plus. The liter thing never helps me lol
Hello George, that is kinda silly we don't have that posted online. I hit up the MFG and should have an answer for you by tomorrow on the internal dimensions. The "external" dimensions appear to be:
Width: 57cm / 22.44 inches
Height: 31cm / 12.20 inches
Depth: 42cm / 16.53 inches
Hello George, the inside dimensions are 21.5" Width x 14" Depth. Thank you!
❗❗Please note that due to popular demand the Shad Top Case Reflectors have been upgraded from Clear to Red.
🛒Can-Am Ryker Shad Top Case Luggage Kit available here: www.slingmods.com/canam-ryker-top-case-luggage-system-shad
🤟❤️🌍👍👍🙂👋👋🇨🇵