I make this pine bowl. The lathe produces a lot of vibration with this piece, i think this is the limit to make something safe in this lathe. I hope you like it. Instagram: bunkerTools
That tool looks like a spindle roughing gouge and should never be used on bowls, emd grain can snap that tool easily... due to the metal made from flat bar not solid round steel like bowl gouges!
@@bunkerTools That's really important safety advice - I'm sure you would hate it if someone got hurt by copying what you show. Please pin the original comment to the top of the comments thread so any newbie turners will see it and learn better, so they stay safe.
Nice! I have begun to see that Parkside tools can be of use to us happy amateurs. If I had the space for it, I’d consider adding one of these lathes. Turning looks like a good deal of fun.
Aldi in Australia has sold this lathe under the Ferrex brand. Thanks for providing an example of something that can be done with this lathe. Note that it doesn't come with any wood turning chisels. Also, as others have mentioned it comes with an unusual M18x1.5mm headstock thread.
El día que pilles un torno en condiciones lo flipas es con ese y haces virgerias, yo me quiero poner a hacerme uno casero con lo.poco que tengo por el taller, esta semana pondré video pero me voy a centrar en hacerle el torno y descansar una temporadillas de hacer videos, un saludo compañero
Buah pues si haces un torno casero espero que hagas vídeo de él! me encantaría. Te recomiendo encarecidamente que te lo hagas porque tornear madera es muy satisfactorio. Lo que pienso yo es que con un torno en condiciones igual me daba mas respeto según que cosas, este al ser poco potente se frena con las enganchadas y eso te da seguridad, pero bueno en algún momento daré el paso a un torno decente. Gracias compañero! Saludos
Es que tornear madera es muy satisfactorio!! Está dando de sí el tornito este.. Te animo a que pruebes el torneado de madera seguro que te gusta. Gracias compañero un abrazo!!
As a newbie to wood turning, I bought one of these lathes, knowing that it's little more than a toy. I tried some practice cuts on apple branch stock and was immediately disappointed by the motor power. Anything more than maybe a 1mm cut and it stalls out. :-(
It is true that this lathe is not very powerful, but something can be done with it. I recommend that you increase the speed, this lathe has more power at more speed.
Lo tienes amortizado el torno pero hace lo menos 4 vídeos, jajaja. Te falta hacer una maza de madera y tienes un conjunto de mortero y maza que lo flipas, ahí te dejo la idea para el siguiente vídeo.
jajaja es que es de pino y como mortero no creo que sirva ya que es madera blanda. Me va bien para guardar algunas piezas del torno. Pero la idea es buena para cuando tenga la madera adecuada. Gracias Juanjo!
Para eso mejor madera de olivo aunque supongo que el pino no tiene porque ser una mala opción. En todo caso habría que tratarlo con algún tipo de vidriante para ser de consumo humano y poder lavarse con agua.
That looks very good, would you say that it is worth buying one for light work and how can I get hold of one . I live in Almeria Spain 🇪🇸. Thank you . 👍🏻😎👍🏻
Thank you dude! For small jobs I recommend it, you can buy it on lidl website for 79€. Keep in mind that the part where the gouge rests will break at some point, you have to be able to make one for yourself. For the rest, buy it!👍👍
hi.I bought it for 44eur reduced sale.the rest broke instantly,motor staled due moving of cooling fan inside,i also broke bearing in tailstock(this was completely my fault ) ,motor on low rev has no power at all.I still belive is good for that price ,so can learn basic thing .i recommend it for really smaller diameters too.
No! I'm a beginner wood turner in Cz who bought one. It's an under powered piece of s**t. Don't waste your money. I hope I'm not too late with my comment!
@@bunkerTools Im really surprised that something that cheap from lidl did not stall under that load, I have a Record Coronet herald that will handle almost anything that you can put on it but a lidl lathe with a truck that big was amazing, I live in spsain and last week that was 79.99, my coronet was 1400 with all the chucks and bits etc.....
I was looking at buying one of these lathes and to be honest having seen your video its really put me off! It appears really under powered, it wobbles about a lot and the motor sounds like its got a loose bag of bolts in it! Nicely made pot though!
@@kriugeris12345 That depends on the space you have. I am not an expert, but I can recommend the lathe that I purchased, it is a big lathe with a very good quality-price ratio ( ua-cam.com/video/EpZwYuDS8NQ/v-deo.html ) If you are looking for a smaller lathe, there are many options, I would tell you not to spend too much money on it, do not worry, whatever you buy will be better than the parkside
@@alanmumford8806 It is true that this lathe is bad quality, but I encourage you to try to do something with it! please increase the r.p.m for best results. If you try to turn at low speed it will be impossible because it has no power.
Lo tengo, para iniciarse al torno y su acceso a más bolsillos, vale la pena a pesar de sus limitaciones. Sin embargo, para proyectos más ambiciosos tipo Rocha KRG, ya hay que pensar en maquinarias más sofisticadas.
@@bunkerTools Le choix du bois est déterminant pas de nœuds et le sapin n'est pas le meilleur comme le chêne, prendre du hêtre pour bien commencé et avoir des outils qui coupe et pas un seul outil et apprendre a talonné pour éviter les désagréments de petits trous dans le bois enfin suivre un stage avant de ce lancer dans le tournage.
Please tell me about the lathe, size and where can you get one. My choices where to buy in my area are Harbor Freight or Harbor Freight, lol. Thanks and keep up the cool videos
I bought this lathe on lidl, also it is available online in lidl web site. The lathe is 1m long aprox. and weights 7 kg. For small and inaccurate projects it is a good option. Thanks for your positive feedback!
I have the same one. You might want to know beforehand, the threadsize of the aluminum plate is M18x1.5, not a standard 2.5 thread. So jaw chucks are not readily available. I designed a 3d part, and printed it in RVS. I will share the file on thingiverse when I'm behind my computer.
Vásároltam èn is egy esztergát nekem nem jótt be akéstamasz alacsony arögzitö menetek gyengék a forgocsúcs mozog rögzitett álapotban is aforrdulatszabályzá is gyenge már én átalakitottam mos már bátran tudom használni
That tool looks like a spindle roughing gouge and should never be used on bowls, emd grain can snap that tool easily... due to the metal made from flat bar not solid round steel like bowl gouges!
True
@@bunkerTools That's really important safety advice - I'm sure you would hate it if someone got hurt by copying what you show. Please pin the original comment to the top of the comments thread so any newbie turners will see it and learn better, so they stay safe.
Psp
With a proper lathe I would agree. But with this lathe I doubt it could brake a finger nail it is so under powered 😂
quite possibly the motor would just stop turning. It sounds like it is bogged down.
You are the greatest " Lidl - Woodturner " !!!
🤣🤣 Thank you!
Nice! I have begun to see that Parkside tools can be of use to us happy amateurs. If I had the space for it, I’d consider adding one of these lathes. Turning looks like a good deal of fun.
I think you've done a great job with this lathe
Really nice looking piece on what's essentially a starter tool
Thank you very much!
@@bunkerTools I just bought one on the strength of your video for 60 quid so Parkside owe you commission 😉
Cuuuute...😍. Make an object like that with a Lidl lathe is great. Good job!
Hahaha😂 Thank you very much dude 👍👍
@@bunkerTools o
Le estás sacando partido al torno de parkside 💪🏻💪🏻💪🏻, muy bonito el cuenco y desde luego se ve robusto 👍🏻, un abrazo Aarón! 😊
Muchas gracias Juanma. Si, lo estoy amortizando jeje. Un abrazo!
Aldi in Australia has sold this lathe under the Ferrex brand. Thanks for providing an example of something that can be done with this lathe. Note that it doesn't come with any wood turning chisels. Also, as others have mentioned it comes with an unusual M18x1.5mm headstock thread.
In the UK (this year) from Lidl, it does come with two basic chisels. One flat angled one and a curved one.
Brilliant! I shall have to get one now.
Thank you!
Keep your tools sharp, and use the right ones.
Estas hecho un artista del torno. Muy guapo te ha quedado. Un saludo
Muchas gracias compañero, ahi seguimos aprendiendo. Un saludo
That's a better job compared to the other bowl maker with the same lathe
Thank you I appreciate it
Al principio pensaba que seria un mortero, pero te a quedado chulo chulo el cuenco, un abrazo amigo!
Si por la forma podría ser un mortero, ha salido así jeje. Era para probar. Gracias mapache un abrazo!!
Интересный токарный станочек! Успехов мастеру!
Esta genial, hazle un mango y tienes un mortero de cocina de lujo😋👌
Gracias compañero. Al ser de pino para mortero no vale 🤣. Saludos
Wow, Parkside made lathe? I didn't expect that.
Yes. It is low quality but also low price
Wich wood you have used
Grande!!!!!
Con in tornio giocattolo fai delle cose bellissime!!!!
molte grazie!!
El día que pilles un torno en condiciones lo flipas es con ese y haces virgerias, yo me quiero poner a hacerme uno casero con lo.poco que tengo por el taller, esta semana pondré video pero me voy a centrar en hacerle el torno y descansar una temporadillas de hacer videos, un saludo compañero
Buah pues si haces un torno casero espero que hagas vídeo de él! me encantaría. Te recomiendo encarecidamente que te lo hagas porque tornear madera es muy satisfactorio. Lo que pienso yo es que con un torno en condiciones igual me daba mas respeto según que cosas, este al ser poco potente se frena con las enganchadas y eso te da seguridad, pero bueno en algún momento daré el paso a un torno decente. Gracias compañero! Saludos
@@bunkerTools Del torno si haré vídeo 📹 pero me lo iré haciendo tranquilo y sin prisa jejeje
Pues si que le estas sacando partido al torno compañero. Te ha quedado un buen cuenco amigo. Un abrazo.
Es que tornear madera es muy satisfactorio!! Está dando de sí el tornito este.. Te animo a que pruebes el torneado de madera seguro que te gusta. Gracias compañero un abrazo!!
simple and tasteful. well done!👏
Thank you very much buddy!👍
Te ha quedado de maravilla!!!
Me estoy arrepintiendo de haberlo dejado en el Lidl...
Un saludo!!!
Muchas gracias amigo. Bueno la verdad es que pese a ser de baja calidad, por el precio que tiene no esta nada mal. Saludos
Amigo en qué líder está este torno para madera gracias
good job!
thank you! this fcking shitt flowing yeeeesss🎶
Nice video ! At 0:59 the metal piece that you screw in the wood to hold the pice to the finalization is in the Parkside package ? Thanks
Yes, it is included. Thanks!
Great video! I just bought this lathe and was hoping to turn some pens is it possible on this lathe.
Pens are doable just buy the correct chucks etc
I use uk pen blanks for my pen stuff
Anything is possible on this lathe........
Como siempre un 10 amigo!!!
Como siempre muchas gracias Juanma!! 😘😘
As a newbie to wood turning, I bought one of these lathes, knowing that it's little more than a toy. I tried some practice cuts on apple branch stock and was immediately disappointed by the motor power. Anything more than maybe a 1mm cut and it stalls out. :-(
It is true that this lathe is not very powerful, but something can be done with it. I recommend that you increase the speed, this lathe has more power at more speed.
@@bunkerTools Thanks for the suggestion. I've only had two learning sessions so far. When I feel a bit more comfortable, I'll crank it up a bit...
@@alanmumford8806
I think you are on the right track, you will improve quickly you will see
@@bunkerTools that’s momentum not power. Just saying. 😉
Nice job
Bonjour
Vu comme vous tenez les outils Il ne sera pas étonnant que vous vous blessiez
Lo tienes amortizado el torno pero hace lo menos 4 vídeos, jajaja. Te falta hacer una maza de madera y tienes un conjunto de mortero y maza que lo flipas, ahí te dejo la idea para el siguiente vídeo.
jajaja es que es de pino y como mortero no creo que sirva ya que es madera blanda. Me va bien para guardar algunas piezas del torno. Pero la idea es buena para cuando tenga la madera adecuada. Gracias Juanjo!
Para eso mejor madera de olivo aunque supongo que el pino no tiene porque ser una mala opción. En todo caso habría que tratarlo con algún tipo de vidriante para ser de consumo humano y poder lavarse con agua.
That looks very good, would you say that it is worth buying one for light work and how can I get hold of one . I live in Almeria Spain 🇪🇸. Thank you . 👍🏻😎👍🏻
Thank you dude! For small jobs I recommend it, you can buy it on lidl website for 79€. Keep in mind that the part where the gouge rests will break at some point, you have to be able to make one for yourself. For the rest, buy it!👍👍
hi.I bought it for 44eur reduced sale.the rest broke instantly,motor staled due moving of cooling fan inside,i also broke bearing in tailstock(this was completely my fault ) ,motor on low rev has no power at all.I still belive is good for that price ,so can learn basic thing .i recommend it for really smaller diameters too.
No! I'm a beginner wood turner in Cz who bought one. It's an under powered piece of s**t. Don't waste your money. I hope I'm not too late with my comment!
Muchas tralla al torno, a ver si llega a navidad 😄👍
🤣🤣🤣👍
Is it me or does it sound like it’s bogging down when you cutting into the wood
It is true. It is because this lathe is not very powerful.
Also, he's working at low revs at that time and has even less power. Thanks for watching
bunkerTools your welcome I love watching your comment it’s really cool 👍🔥
Guapísimo el bol y encima es jodido de trabajar el pino
Muchas gracias Alex, en efecto, tu bien lo sabes que el pino y el torno no son muy amigos. Saludos
Muy buen trabajo. El torno admite platos de garras? un saludo
Muchas gracias amigo. Si, hay platos de garras para este torno.
Podrías decirnos dónde poder comprar plato de garras?
I am surprised that is does not catch fire with a piece of wood that big!! Im amazed it will fit!!
hahaha yes.. it was too big for that lathe..
I have bought a new one a little bigger..😁
@@bunkerTools Im really surprised that something that cheap from lidl did not stall under that load, I have a Record Coronet herald that will handle almost anything that you can put on it but a lidl lathe with a truck that big was amazing, I live in spsain and last week that was 79.99, my coronet was 1400 with all the chucks and bits etc.....
Almost bought this same lathe last week, almost because by 13:00 when i had the time they were all gone...
I got to my store first thing and managed to get one, by the time I’d finished my shop (about 20 mins later) the shelf was empty!!!
Qué guapo el cuenco. Un saludo.
Muchas gracias!! Un saludo.
Hola, que modelo de Parkside es? Gracias.
Thanks for sharing
Thanks to you for watching and comment 👍
time for a new lathe
The new lathe is already here.
I was looking at buying one of these lathes and to be honest having seen your video its really put me off! It appears really under powered, it wobbles about a lot and the motor sounds like its got a loose bag of bolts in it! Nicely made pot though!
Yes, better spend a little more money and buy something better.. Thank you!!
@@bunkerTools any recomendacions on what brand and model would be better?
Yeah, don't buy it. It's weak. And the tool rest is s**t, even for a beginner like me. I'm thinking of turning mine into a sander.
@@kriugeris12345 That depends on the space you have. I am not an expert, but I can recommend the lathe that I purchased, it is a big lathe with a very good quality-price ratio ( ua-cam.com/video/EpZwYuDS8NQ/v-deo.html )
If you are looking for a smaller lathe, there are many options, I would tell you not to spend too much money on it, do not worry, whatever you buy will be better than the parkside
@@alanmumford8806
It is true that this lathe is bad quality, but I encourage you to try to do something with it! please increase the r.p.m for best results. If you try to turn at low speed it will be impossible because it has no power.
Lo tengo, para iniciarse al torno y su acceso a más bolsillos, vale la pena a pesar de sus limitaciones. Sin embargo, para proyectos más ambiciosos tipo Rocha KRG, ya hay que pensar en maquinarias más sofisticadas.
Totalmente de acuerdo contigo. Yo ya di el paso a un torno en condiciones 🙂
@@bunkerTools Le choix du bois est déterminant pas de nœuds et le sapin n'est pas le meilleur comme le chêne, prendre du hêtre pour bien commencé et avoir des outils qui coupe et pas un seul outil et apprendre a talonné pour éviter les désagréments de petits trous dans le bois enfin suivre un stage avant de ce lancer dans le tournage.
@@bernardlegris8902 Merci pour tes conseils
Good
Thank you
I wish parkside make a metal lathe
Me too 😁
tengo un torno parkside y también vibra mucho en pieza gandes , que tipo de gubias utilizas
He cambiado de torno y he adquirido gubias nuevas
👍🏻
👍👍👍
How long did it take you to do it?
May be around 3 hours, but its because I'm a begginer and also I used this small lathe.. Thanks for watching
Does anyone know of a chuck to fit these lathes?
Por que te as hecho un soporte nuevo para las gubias?
Se me rompió el que venía de serie
Do you know what chuck will fit this lathe?
I'm sorry I don't know it
El torno no consume luz. Consume amperios pedroo
Her: oh no he isn't responding to my messages, he probably cheating on me
Him: 3:35
🤣🤣🤣🤣 Thank you
Please tell me about the lathe, size and where can you get one. My choices where to buy in my area are Harbor Freight or Harbor Freight, lol. Thanks and keep up the cool videos
I bought this lathe on lidl, also it is available online in lidl web site. The lathe is 1m long aprox. and weights 7 kg. For small and inaccurate projects it is a good option. Thanks for your positive feedback!
I have the same one.
You might want to know beforehand, the threadsize of the aluminum plate is M18x1.5, not a standard 2.5 thread.
So jaw chucks are not readily available.
I designed a 3d part, and printed it in RVS. I will share the file on thingiverse when I'm behind my computer.
Daedelus Im interested in the 3D file as well! Thanks for sharing!
@@daedelus_ Do you have a link for the files? Really thanks!
@@Mironscrafts www.thingiverse.com/thing:4358452
Schönes Video 👍würde mich freuen wenn ihr mir auf meinem Kanal vorbei schaut 😊😉
Danke Kumpel 👍
Un alemán guarda tornillos un español hace ajoaceite
🤣🤣🤣 Soy español, pero ese cuenco no es apto para hacer "all i oli"! Me ha hecho gracia tu comentario. Gracias por ver y comentar!
بسيط وجميل👍🇩🇿
شكرا جزيلا
Parkside 😂😂😂😂
Muito bom
Obrigado
you made the bowl wrong
Change video title to; I have no clue how to use turning tools :D
🤣 that's how my beginnings were..
Vásároltam èn is egy esztergát nekem nem jótt be akéstamasz alacsony arögzitö menetek gyengék a forgocsúcs mozog rögzitett álapotban is aforrdulatszabályzá is gyenge már én átalakitottam mos már bátran tudom használni
Igen, ez az eszterga gyenge minőségű
Szépen nyüszített a hajtás. Vége lesz hamar.
ques maco aket conc goita tu
M'alegra que t'agradi Doraemon. Set
Tanto trabajo para que sea un depósito de chucherías.??
Naaaaa...!!
Todo aquello que merece la pena conlleva un trabajo y esfuerzo, todo lo que consigas fácilmente sin esforzarte no te satisfará.
Nice toolrest, bro.
Did you make it yourself?
Yess its handmade, very easy to make👍