Appreciate your review and overview of the changes. I bought a 2023 UForce 1000 XL in Aug 2023 and it has this same fitment challenge. Also the harness SuperATV provides doesn’t adapt to the 2023. No fault on SuperATV, they do not list this windshield as compatible with the 2023 but good to inform owners there are some significant changes between the 2019-22 and 2023 models.
This shield in the video is on a 2023, we had 0 issues with the wiring of the shield, not sure why they say the harness won't work, nothing different there, just the cross member. We have a video on this channel specific about the cross member change and what to look for. Thank you for watching!
I got mine installed and it works great, made the same modifications to the cross member as yours. Regrading the wiring harness, on mine the connector SuperATV's instructions reference in the instructions no longer exist (not on mine anyway) -- I just decided to tap into the 12V accessory power (cigarette lighter)@@HesterEdition
no it is a whole other shield. You want to either save the money and go manual, or spend the extra for the powerflip when deciding on which shield you wish at the time of purchase.
I just got my new 2024 CF Moto Uforce 1000 yesterday. Dealer was going to install my windshield, but it was going to be a week or so. So, being car guy with several classic cars I have rebuilt, I decided to just take the windshield and do it myself. Ran into this bracket issue last night. Called the dealer and they were unaware until now. Obviously, I have the windshield partially mounted with a need to cut these bracket notches. Not sure how easy it will be to cut them with a dremel blade. May have to find a friend with a plasma cutter or get a small rotary saw? It would be nice if that portion of the roof could be removed? I will check tonight. Any advice on cutting this would be great. Good video.
Yes, we also have a great video showing the frame changes. A Dremel will take a bit, a cutting wheel will make short work of it. Thank you for watching! ua-cam.com/video/Dh9xKegrcL8/v-deo.html
@@HesterEditionThanks I got it mounted after cutting it with a combination of small cutting wheel and jigsaw with a metal cutting blade. Now I can’t find a keyed power source other than the one under the hood against the firewall behind the fuse box? It works but it runs really slow. It must be low amperage there. I need at least 10 amps and the one loose two wire (red/white) under the dash by steering column is dead in every scenario, not hot not keyed nothing? I considered the heated seats plugs under the seats but those are hot and I need keyed power since the switch is illuminated. I saw the big plug under the hood, maybe for blinkers, but it has 6-8 wires and I kind of hated splicing into that one? Winch is workable but it’s hot too. I hate to keep asking for help, but where did you guys wire it. Pigtail they provided was useless fyi.
Fyi, I ended up tapping into that large plug with 10 wires mounted near front grill under the hood. I found that the brown wire port (top second from left) was keyed power and turned off instantly with the key. I just made a temporary blade cut with snips and inserted, worked. I grounded with ring connector they have to the winch ground. I had to take up the wire and plug which is not the best looking but until I figure a better place it will work I guess.
Sorry for delays, don't get every notification. Just give us a call Tuesday-Saturdays (575) 445-3558 for all your parts and accessory needs, we will get you a discounted to your door price.
Always enjoy your builds and videos
Thank you for watching, we greatly appreciate it!
Appreciate your review and overview of the changes. I bought a 2023 UForce 1000 XL in Aug 2023 and it has this same fitment challenge. Also the harness SuperATV provides doesn’t adapt to the 2023. No fault on SuperATV, they do not list this windshield as compatible with the 2023 but good to inform owners there are some significant changes between the 2019-22 and 2023 models.
This shield in the video is on a 2023, we had 0 issues with the wiring of the shield, not sure why they say the harness won't work, nothing different there, just the cross member. We have a video on this channel specific about the cross member change and what to look for. Thank you for watching!
I got mine installed and it works great, made the same modifications to the cross member as yours. Regrading the wiring harness, on mine the connector SuperATV's instructions reference in the instructions no longer exist (not on mine anyway) -- I just decided to tap into the 12V accessory power (cigarette lighter)@@HesterEdition
@@joshwilliams9122 Simple fix for ya :)
Can the power be added to the regular flip up windshield?
no it is a whole other shield. You want to either save the money and go manual, or spend the extra for the powerflip when deciding on which shield you wish at the time of purchase.
I just got my new 2024 CF Moto Uforce 1000 yesterday. Dealer was going to install my windshield, but it was going to be a week or so. So, being car guy with several classic cars I have rebuilt, I decided to just take the windshield and do it myself. Ran into this bracket issue last night. Called the dealer and they were unaware until now. Obviously, I have the windshield partially mounted with a need to cut these bracket notches. Not sure how easy it will be to cut them with a dremel blade. May have to find a friend with a plasma cutter or get a small rotary saw? It would be nice if that portion of the roof could be removed? I will check tonight. Any advice on cutting this would be great. Good video.
Yes, we also have a great video showing the frame changes. A Dremel will take a bit, a cutting wheel will make short work of it. Thank you for watching! ua-cam.com/video/Dh9xKegrcL8/v-deo.html
@@HesterEditionThanks I got it mounted after cutting it with a combination of small cutting wheel and jigsaw with a metal cutting blade. Now I can’t find a keyed power source other than the one under the hood against the firewall behind the fuse box? It works but it runs really slow. It must be low amperage there. I need at least 10 amps and the one loose two wire (red/white) under the dash by steering column is dead in every scenario, not hot not keyed nothing? I considered the heated seats plugs under the seats but those are hot and I need keyed power since the switch is illuminated. I saw the big plug under the hood, maybe for blinkers, but it has 6-8 wires and I kind of hated splicing into that one? Winch is workable but it’s hot too. I hate to keep asking for help, but where did you guys wire it. Pigtail they provided was useless fyi.
Fyi, I ended up tapping into that large plug with 10 wires mounted near front grill under the hood. I found that the brown wire port (top second from left) was keyed power and turned off instantly with the key. I just made a temporary blade cut with snips and inserted, worked. I grounded with ring connector they have to the winch ground. I had to take up the wire and plug which is not the best looking but until I figure a better place it will work I guess.
How much for the setup?
Sorry for delays, don't get every notification. Just give us a call Tuesday-Saturdays (575) 445-3558 for all your parts and accessory needs, we will get you a discounted to your door price.