They made new machines. They have an Easywash 60' now and a SteamBoost programm. These are also much better made and have an Inverter Motor. I have a new Zanussi for 6 months now, and I have to say they are very good.
We've got one of these machines, it's been great for a few years, but now not powering on. Think it might be a suppressor fault, but don't know where to look for it. Are you able to enlighten us?
Sometimes if you have a filter, in the same compartment there may be a manual switch to enable you to open the door. Also sometimes push the door hard as well before pulling as it can release the door catch. Good luck
The build quality now is not a patch on the machine you have at the moment. If you purchased a new Zanussi washer, you would certainly notice the difference, and it's not for the better.
These are not great at all. I had one and it was one of the worst I had. I got sold as I couldnt stand it. Too sensitive to loads and would take forever to balance the load and it was very whiny on spin. Sometimes wouldn't spin because it was so sensitive.
Alphaone99 I actually have this machine (not this particular model) for maybe 2 years its works perfectly, although I don’t use it often because It’s in my hometown house which I come here a few months per year.
Same replies to my sister's one, its so fuzzy on spins even if the load is the slightest bit unbalanced, cycles are drastically long (synthetics is the only cycle i'd use) even tho its doing well since 2015
They made new machines. They have an Easywash 60' now and a SteamBoost programm. These are also much better made and have an Inverter Motor. I have a new Zanussi for 6 months now, and I have to say they are very good.
You also forgot about the grey flap.
This machine is based on the Flexidoes range so the Flap is used for Your liquid detergent.
We've got one of these machines, it's been great for a few years, but now not powering on. Think it might be a suppressor fault, but don't know where to look for it. Are you able to enlighten us?
How to make the setting if i wash blengket thankyou if you want to answer from housmaid in hongkong i'm from Indonesia 🙏
thank you
Zanussi are rebranded electrolux/AEG machines. There are machines which are worse but the quality has been going downhill for the last 15 years.
I have zanussi and it is very good! I have the TimeCare model.
And the olders ones have very good quality.
Very I formative video
Anyone know how to open a stuck door that won’t open. I’ve done a spin and all water is out. I can hear the luck unlock but door still won’t open?
Sometimes if you have a filter, in the same compartment there may be a manual switch to enable you to open the door. Also sometimes push the door hard as well before pulling as it can release the door catch. Good luck
Where is the filter of this machine?
Where is the filter on this machine
What is wrong with the machine when it shows E50
This normally indicates there is an issue with the motor or an indidual component failure within the motor.
The models from other counties... Has better quality. This one is not that good.
There are models made in belgium and egypt? 😳
@@cosettapessa6417 Yup, but now models from the UK, Belgium etc... Are almost the same and all good :)
@@cosettapessa6417 Oh, no not made in these countries but just other models.
@@zanussi_and_aeg_fan which one is made in egypt?
@@cosettapessa6417 None are made in egypt.
Had my last zanussi for 12 years. This seems a lot cheaper looking and not anymore advanced than mine which is over a decade old. Strange.
The build quality now is not a patch on the machine you have at the moment. If you purchased a new Zanussi washer, you would certainly notice the difference, and it's not for the better.
@@lords-electrical think I'll go bosch. Can't trust any of the new washibg machines now.
@@Sweenece The Zanussi timecare models are very good!
Where is the filter please
Azəri dilində istəyirəm
These are not great at all. I had one and it was one of the worst I had. I got sold as I couldnt stand it. Too sensitive to loads and would take forever to balance the load and it was very whiny on spin. Sometimes wouldn't spin because it was so sensitive.
Thanks, I was ready to buy one. What do you recommend instead? Blomberg or Beko?
Alphaone99 I actually have this machine (not this particular model) for maybe 2 years its works perfectly, although I don’t use it often because It’s in my hometown house which I come here a few months per year.
Same replies to my sister's one, its so fuzzy on spins even if the load is the slightest bit unbalanced, cycles are drastically long (synthetics is the only cycle i'd use) even tho its doing well since 2015
Mine have short cycles and spin perfect!
Why don't this man answer questions?
Azəribaycan dilində danışsın başa duşmurəm
Azəri dilində
What is so hard about using a washing machine ehhh?!!
If a woman can use it in her Pyjamas, it's not hard 😀