The Tuya integration is great. It cannot however work with Google as the Google integration has not been programmed. So in Google home, it doesn't have any operation or information. On the app, would love some more info: - change the colour of the pump on and element on blocks so that they light up when active - show a history/graph of geyser/collector temps when you click the temperature tiles - error status section to see if clear or say E8 error etc But this is a great 1st step and sorts out many issues I had with overheating, indicators when the element is on so I don't forget, etc Great work Geyserwise!
Hey folks - so we have one of these units which is now flashing E8 on the display. Is there a video or information on the various error codes and how to resolve them?
Thank you for the video and for doing the Tuya integration! Would the Tuya Home Assistant integration work with Geyserwise as well? A demo video of the Geyserwise functionality in the Tuya app would be great.
Yes, it works quite well in HA. The official Tuya integration has limited control and there is a bit of a delay since it works through the cloud, but you can control the important bits (power on/off, and current temp). The LocalTuya integration has instantaneous feedback and allows you to control everything except the built-in timers, which you arguably don't need since you can automate it via HA. I'll post the DPs here a bit later.
At the moment I need to set my GW-Delta-t to holiday mode in the evening if the temperature is around 70 deg at the end of the day. If I don't do this, then the temperature gets way too high the following day if it's very sunny. The problem with this is that if I set the holiday mode early in the evening (I go to bed early every day :) , then the temperature is down to 50 deg in the morning which is too cold for our morning showers. I would like the holiday mode or whatever other option there may be, not to cool the geyser below 60 deg. Will this new controller provide us with an option to achieve that?
Thanks a lot for making the switching from manual operation to wifi enabled operation possible and as easy as 1,2,3. I’m ready to start using it now and reap the benefits 😋 of being able to control it from within the comfort of my phone.
Can someone tell me what does it mean if the green spanner light is ON? I am struggling with heating my water when I press the red button and the geyser breaker is ON, does that effect the heating?
I’d assume it works perfectly fine … I use the tuya DB board switches (din rail), and tuya smart plugs on larger appliances - and they all work perfectly (6 devices). The tuya controller within the geyserwise is a simple wireless switch. The great thing is you can add each controller into a scene or groupings… so 1 click controls multiple switches.
The Tuya integration is great. It cannot however work with Google as the Google integration has not been programmed. So in Google home, it doesn't have any operation or information.
On the app, would love some more info:
- change the colour of the pump on and element on blocks so that they light up when active
- show a history/graph of geyser/collector temps when you click the temperature tiles
- error status section to see if clear or say E8 error etc
But this is a great 1st step and sorts out many issues I had with overheating, indicators when the element is on so I don't forget, etc
Great work Geyserwise!
Hey folks - so we have one of these units which is now flashing E8 on the display. Is there a video or information on the various error codes and how to resolve them?
Thank you for the video and for doing the Tuya integration! Would the Tuya Home Assistant integration work with Geyserwise as well? A demo video of the Geyserwise functionality in the Tuya app would be great.
Yes the Smartlife app. also works with the Geyserwise. Will try and make a few videos of the App.
Yes, it works quite well in HA.
The official Tuya integration has limited control and there is a bit of a delay since it works through the cloud, but you can control the important bits (power on/off, and current temp).
The LocalTuya integration has instantaneous feedback and allows you to control everything except the built-in timers, which you arguably don't need since you can automate it via HA. I'll post the DPs here a bit later.
At the moment I need to set my GW-Delta-t to holiday mode in the evening if the temperature is around 70 deg at the end of the day. If I don't do this, then the temperature gets way too high the following day if it's very sunny. The problem with this is that if I set the holiday mode early in the evening (I go to bed early every day :) , then the temperature is down to 50 deg in the morning which is too cold for our morning showers. I would like the holiday mode or whatever other option there may be, not to cool the geyser below 60 deg. Will this new controller provide us with an option to achieve that?
Where I can buy gyserwise products?
Thanks a lot for making the switching from manual operation to wifi enabled operation possible and as easy as 1,2,3. I’m ready to start using it now and reap the benefits 😋 of being able to control it from within the comfort of my phone.
What is the ptc temp adjustment for?
When you use the ptc element which can be both powered by DC from solar panels or AC from when the sun is not there or under heavy cloud cover.
Awesome, finally we have something that looks like it was made 30 years ago. Why is South Africa so far behind :(
If I turn it on with the app and someone manually turns it off,will I see that it was switched off on the app?
Should do - all my tuya wireless switches (smart plugs and DB smart board breakers) all have that feature
Can someone tell me what does it mean if the green spanner light is ON? I am struggling with heating my water when I press the red button and the geyser breaker is ON, does that effect the heating?
Hi is it already available for purchasing?
Yes it is. You can contact the team at geyserwise directly.
Where can buy one of there kits?
You can purchase from our offices in Centurion or Cape Town. If you need a closer distributor please email info@geyserwise.co.za
We have 4 geyserwise units, can we run all 4 on this Tuya app...please send a link an instructions how to do this
I’d assume it works perfectly fine … I use the tuya DB board switches (din rail), and tuya smart plugs on larger appliances - and they all work perfectly (6 devices). The tuya controller within the geyserwise is a simple wireless switch.
The great thing is you can add each controller into a scene or groupings… so 1 click controls multiple switches.
What does the on off toggle in the tuya app do?
Guessing it's just an indicator if the geyserwise device is powered on or not
Can you view the temperature from the app?
Yes you can
Yes you can