Aquafysh ELF08 robotic pool cleaner repair video.

Поділитися
Вставка
  • Опубліковано 1 чер 2023

КОМЕНТАРІ • 20

  • @donaldbollman1049
    @donaldbollman1049 Місяць тому

    Thank you for the content. My problem wasn't the same, but you gave me an entry point. It's a key. Thanks again.
    Edit: the motor was frozen. Some pliers just loosened it up.

  • @JOSEPHUSJORDAN
    @JOSEPHUSJORDAN Рік тому +2

    Thanks. The video was a big help. The motor mechanisms probably got dislodged during handling. I didn’t see any obvious internal issue. It worked like it was as soon as I put it back in the pool.

  • @adelinalujan5670
    @adelinalujan5670 11 місяців тому +1

    Thanks for the video! It worked ! I had the exact same problem. It worked most of summer and then just stopped working. I followed this video step by step and threw it back in the pool and it worked! So happy to at least use it for the rest of summer! Thank you 👌🏽

  • @nathangreen3118
    @nathangreen3118 Рік тому +2

    I faced almost the exact same issue. I bought it last year, it worked like a champ. I used it a few times this year, then I had problems. I took mine apart and found that the coupler where the flat side of the motor shaft goes in, was wallered out. I was able to drill and tap the coupler for a 10-32 set screw to get a bite on the motor shaft. It works now but is moving slower in one direction than is normal. I'm thinking of taking everything back apart and inspecting the gears and putting more white lithium grease all over them.

    • @robertmedeiros5563
      @robertmedeiros5563  11 місяців тому

      After the repair mine also moves a bit slower. I think the motor must have partially failed due to the lockup. It still works but is definitely slower.

  • @billgolliher5117
    @billgolliher5117 Рік тому +3

    My elf 08 turned itself on while charging on dry land last night. Luckily it was blocked in so it couldn't crawl away. It was in a dry area. Hope this won't be a reoccurring problem. It continued to run after unplugging it so I dropped it in the pool until it ran out of power.

    • @Buckysbarn
      @Buckysbarn Рік тому

      Had same issue afraid to plug back in. Did your work after that happened

    • @connieh.1679
      @connieh.1679 11 місяців тому

      We are having the same issue. It turned itself on when we had it plugged in. Let it run out in the pool and then let it dry out, plugged in and it did it again. Have either of you found the cause of this.

    • @billgolliher5117
      @billgolliher5117 11 місяців тому +1

      No clue on the problem. I had bought mine aftermarket so no warranty. Bought a new one and returned the old one. Maybe a little underhanded, but didn't want to be out the whole amount for such a faulty product. So far so good with the new one.

    • @connieh.1679
      @connieh.1679 11 місяців тому

      @@billgolliher5117 .. yep.. don't blame you. hubby was looking for the receipt- . Only had it a month and of course didn't buy the insurance but not been able to find a fix for it.

    • @NaturePaganWitch
      @NaturePaganWitch 5 місяців тому

      We had the same issue, but only once. It was very strange! It worked all last year perfectly otherwise. This year put in and this problem occurred. I'm going to go try your fix now & will try to remember to report back. I didn't see your video telling us if yours worked after your repair?

  • @NaturePaganWitch
    @NaturePaganWitch 5 місяців тому

    I cleaned everything but now what do I lubricate all the gears you repaired that interlocked. I had to take off the lubrication because there was so much gunk that built up & prevented the gear from moving it appears so it had to be removed. Can I spray with WD40 before reassembling?

  • @travisnealy8365
    @travisnealy8365 5 місяців тому +1

    Mine worked great for a few months. I charged it up the other day, I put it in the pool, it started cleaning and then just stopped. I pulled it out of the pool and none of the lights were turning on. No lights when I plug it into the charger. It's just dead. Any suggestions? Great video by the way. Very detailed and straight to the point.

  • @NaturePaganWitch
    @NaturePaganWitch 5 місяців тому

    This did not resolve my issue unfortunately... After starting to work on it I found that the front right wheel that has the little thing that is attached to it is not moving at all and is damaged a bit in one place, but I don't know if that's normal when not turned on or if the slight damaged area could cause it to not move? Anyone know?

  • @eddygeeevents2327
    @eddygeeevents2327 11 місяців тому +1

    Hi
    Did you get your cleaner repaired? I’m thinking I’m out $200. Bought this cleaner in a resale shop!

    • @robertmedeiros5563
      @robertmedeiros5563  11 місяців тому

      This worked for mine but not sure If it is the same scenario with yours.

  • @sterlingtv5680
    @sterlingtv5680 Рік тому +2

    So did it work ??

  • @MrCnardozzi
    @MrCnardozzi Рік тому +1

    a piece of S#$%, on the 2nd unit that died like the first one. Aquafish has no phone number only technical support email which they never answer you back! DONT BUY

    • @robertmedeiros5563
      @robertmedeiros5563  11 місяців тому

      The only way I was able to communicate with them was via email. I needed to have proof of purchase from an authorized retailer, which evidently is walmart, Sam's maybe another. Mine was bought on Amazon so I had no help.