Video skips the critical detail: The wire that goes into the hole in the plate: Look at the other end of that wire. That short bit of wire that comes off the coil is what holds down the spring loaded parts.
DAmn,. and Thank You!!! I completely missed that and was cussin up a storm at this thing! ALSO: you should travel the short end of the wire catch around the outer perimeter on the side which does not have the bent metal fastener (strap) that holds the piercing arm in. This will help a lot when getting it in place. Note that there is also a little tiny groove there to set clip of the short end in place. Thank you again!!
Both the instruction video and instructions that come with the traps suck!! This video finally helped me set some traps: ua-cam.com/video/2GSfT6DxHZM/v-deo.html.
If the printing and pictures on the back of the box weren't so small and faint, I could have saved about 20 minutes of squinting and guessing. Who does your graphics... someone with 18 year old eyes?
Hey just wanted to mention that this video is way to fast and skips many details. It's as if this video was only made for people who already know where and what the parts and pieces are.
This video needs to be redone, as it puts the focus of the mechanism in the wrong place. The most important part is the tiny hook opposite from the metal plate. It hooks over the front end of trap.
Thank you very much for the tutorial. Early this morning I set a trap because the gopher was eating the root of an orange tree. Not even a minute passed and the trap caught it. THANK YOU For the video
Video skips the critical detail: The wire that goes into the hole in the plate: Look at the other end of that wire. That short bit of wire that comes off the coil is what holds down the spring loaded parts.
DAmn,. and Thank You!!! I completely missed that and was cussin up a storm at this thing!
ALSO: you should travel the short end of the wire catch around the outer perimeter on the side which does not have the bent metal fastener (strap) that holds the piercing arm in. This will help a lot when getting it in place.
Note that there is also a little tiny groove there to set clip of the short end in place.
Thank you again!!
What am I missing? I can’t get mine to work and these instructions and the ones on the box suck...
Made guess where!? China!
Both the instruction video and instructions that come with the traps suck!! This video finally helped me set some traps: ua-cam.com/video/2GSfT6DxHZM/v-deo.html.
I’m so lost, why is this so hard
Poor design and instructions
Seriously!
You don't say which end of the trap to put into the hole first and you put it in the hole so quickly I can't tell which end you put in first.
If the printing and pictures on the back of the box weren't so small and faint, I could have saved about 20 minutes of squinting and guessing. Who does your graphics... someone with 18 year old eyes?
Terrible instructions
Hey just wanted to mention that this video is way to fast and skips many details. It's as if this video was only made for people who already know where and what the parts and pieces are.
exactly! Completely missed showing the groove of the catch
bruh those written and picture instructions still suck! 😂
Pay attention. This is a video. Use common sense. This video answered all of my questions. Good job.
Set these a few times b4 years ago...forgot about the trigger wire hook part which is the key to setting which wasnt mentioned here
This video needs to be redone, as it puts the focus of the mechanism in the wrong place. The most important part is the tiny hook opposite from the metal plate. It hooks over the front end of trap.
Thank you very much for the tutorial. Early this morning I set a trap because the gopher was eating the root of an orange tree. Not even a minute passed and the trap caught it. THANK YOU For the video
Victor makes a far superior trap.
More Help Here: ua-cam.com/video/2GSfT6DxHZM/v-deo.html