To adjust the result If the measured material is different from your reference. You can adjust the result shown by the meter to match this value. To adjust the value to a higher moisture: When the measurement result is displayed press twice on the “F-“ button. Three bars will appear on the upper edge of the display. Wait for a moment and the result appears on the display again. Now each time you press the “F-“ button, +0.1 moisture % will be added to the result. To adjust the value to a lower moisture: When the measurement result is displayed, press the “F-“ button three times. Three bars will appear on the lower edge of the display. Wait for a moment and the result appears on the display again. Now each time you press the “F-“, -0.1 moisture % will be deducted from the result. Note! This adjustment is specific to the used scale. In other words there may be defined specific adjustment for each scale.
Thank you for your enquiry regarding the Wile-65 for Quinoa. With regards to this, we would need to request a calibration curve from Wile and could send you this as soon as it is available. Please reach out to our email address scientists@instrumentchoice.com.au if you need a calibration curve or further assistance.
Thank you for your question, with this model, you cannot do Coffee moisture readings. To achieve this you would need to look at the COCOMoist which can be viewed below; www.instrumentchoice.com.au/wile-coffee-and-cocoa-moisture-meter-ic-cocomoist
Thanks for your comment, you can find our current price on the Instrument Choice website at this link - www.instrumentchoice.com.au/wile-55-grain-and-seed-moisture-meter
Bagaimana cara setting ulang, untuk menaikan hasil kadar air nya
To adjust the result If the measured material is different from your reference. You can adjust the result shown by the meter to match this value.
To adjust the value to a higher moisture:
When the measurement result is displayed press twice on the “F-“ button. Three bars will appear on the upper edge of the display. Wait for a moment and the result appears on the display again. Now each time you press the “F-“ button, +0.1 moisture % will be added to the result.
To adjust the value to a lower moisture:
When the measurement result is displayed, press the “F-“ button three times. Three bars will appear on the lower edge of the display. Wait for a moment and the result appears on the display again. Now each time you press the “F-“, -0.1 moisture % will be deducted from the result. Note! This adjustment is specific to the used scale. In other words there may be defined specific adjustment for each scale.
Quinoa is not on the list, how can we measure it?
Thank you for your enquiry regarding the Wile-65 for Quinoa.
With regards to this, we would need to request a calibration curve from Wile and could send you this as soon as it is available. Please reach out to our email address scientists@instrumentchoice.com.au if you need a calibration curve or further assistance.
Sorry, we have checked and on the Wile-55 there is not a curve for Quinoa. You can use a manual curve using the attached on scale -0-.
How this can use coffee moisture?
Thank you for your question, with this model, you cannot do Coffee moisture readings. To achieve this you would need to look at the COCOMoist which can be viewed below;
www.instrumentchoice.com.au/wile-coffee-and-cocoa-moisture-meter-ic-cocomoist
How much price?
Thanks for your comment, you can find our current price on the Instrument Choice website at this link - www.instrumentchoice.com.au/wile-55-grain-and-seed-moisture-meter
105000 Price in Pakistan