Відео

Hi Lindsaytemple5645, Thanks for the enquiry regarding the PMS-714, with this model, 0.0% is dry and 50% is saturated. On this meter, you cannot store readings, you can only hold a reading, or store and display a maximum or minimum reading. I hope this helps answer your enquiry.

Thanks for the enquiry, on this, yes this is correct, it is on the automatic setting and in calibration mode will recognise the solution it is in.

Thank you for your question on your Testo 405i, on this, this would likely indicate it is trying to establish a Bluetooth connection. Can you send a photo through to Scientists@instrumentchoice.com.au and the team will assist here in getting this working for you.

Hi Carlosbenjaminpaez2268, Unfortunately we don't know of such a tutorial.

Hi BMEHasanMahmud, thank you for your enquiry, on this, can you confirm which meter you are referring to here? The value of 100% is more relevant than the 9.1mg/l value as this is adjusted for our barometric pressure.

Hi huynh4880, Thank you for your enquiry, and on this, it will largely depend on what you are measuring. What sample are you testing? As in general rinsing in distilled water, or a detergent/water mix can suffice for most applications. There are some applications where electrode cleaning solution would be vital, so if you can confirm that would be great.

Hi, Jackson2108 thanks for your query. In general we recommend avoiding touching the circuit board as much as possible due to the amount of sensitive electronics found on the circuit board. This is mainly in regards to the components rather than the board itself. I hope this helps answer your question.

Hi, thanks for the feedback. Don't forget if you ever need any assistance our team is available to help at scientists@instrumentchoice.com.au.

Great to hear.

Thanks for your query. In regards to calibrating the BOD, this is calculated from the DO reading. As long as the DO is calibrated, then the BOD reading will be accurate.

Hi sorry to hear of your trouble, hopefully we can help. The first thing we can recommend is follow the below instructions, 1) Have the unit powered OFF. 2) Press the ON/OFF, Meas and Cal button simultaneously, and “Init” should appear. 3) Once it does, press “CAL” and the meter will turn off. Now turn the meter back on and try and recalibrate again. If this still doesn't work, please send a photo of your meter and error through to scientists@instrumentchoice.com.au the team will be happy to help you through this error. I hope this helps your question.

Hi Garyroach8624, thanks for the enquiry, on this AP normally means “Access Point” and correlates to a WiFi setup, however, this station doesn’t offer this. Can you confirm you definitely have the XC0432 here?

@@instrumentchoice Sorry its a 440, I did manage to get them paired, I disconnected and removed all batteries and began the normal set up as at the firs power up. Thanks for you reply.

Hi thanks for your question. In regards to your query we can recommend having a look at the following link this may help you out. shop.humle.se/en/equipment/measuring/oxygen/zero-oxygen-calibration-25-g#:~:text=Prepare%20a%20solution%20of%204,be%20prepared%20shortly%20before%20usage.&text=Produces%20approximately%20500%20ml%20solution I hope this helps to answer your question.

Hi @ThingsthatBling-fi7qp, The Weatherlink Live is only compatible with the newer Vantage Pro2 Sensor suites and as such, it won’t be able to be used with the original Vantage Pro.

Hi @ngside9580, the IC0400WS has no internal memory or ability to communicate with a PC etc. You can only see conditions on the console.

Go into the mode you want to reset, either the Maximum or Minimum mode using the “Max/Min” button, and then hit “Max/Min” for 2 seconds, this will reset it to the current reading. I hope this helps answer your question.

Hi @luckypiston, thank you for your enquiry, on this the App may only be able to display velocity, not a flow measurement in graph form. We will flag this with Testo and will see what can be done.

​@@instrumentchoice Thank you, Yeah it would be nice if that option became available simply on a firmware update Personally myself and i think customers too can more easily relate to volume flow than velocity, i think its easier to imagine cubes of air moving through a duct rather than air ripping along at xxxx# of feet per minute. Now if u can show that with a graph that would be awesome but u know what , if u could lay the two graphs over each other that would b even better ! then u could show the effects of transitions and bends in the system simultaneously and make comparisons , could be a even better troubleshooting tool !

Hi, LuckyPiston, Thanks for your query. On this, IC-0560-1405 will only measure in feet per minute (fpm) to a maximum of 5,900 feet per minute. If you would like to see more Anemometer's there may be something on our website more suited for your application.

@@instrumentchoice I'm considering it for use in a cylinder head flow test bench, typical peak flow rates there are between 200 and 300 cfm with a 4 inch bore pipe , my calculation (actually i used ChatGpt) is 300 cfm = velocity 3435 fpm or 17.46 M/s , so it looks like the 405i could easily be a viable option.

Hi @@luckyPiston, on this, as this falls within the range, it would definitely appear that this unit would suit your requirements. Just make sure it is also within the temperature tolerance of the device to ensure it will suit. If you would like anymore information it may be easier to contact our team at scientists@instrumentchoice.com.au :)

Hi @rabiyashah3882, Thanks for your question, on this, TDS is a factor of conductivity, it applies a factor to the conductivity reading to produce its TDS reading. In general if you are specifically looking at TDS and want to ensure accuracy, it would be advisable to calibrate TDS as well. For TDS you would do a manual calibration using a standard of your choosing from 0-10ppt. What sort of level are you measuring?

I want to check pH, ec, and tds in soil samples but this instrument is showing me pH readings different readings every time?

Also can i use standard sol of 0.01M of KCl for EC

To find out the price of the Wile-500 Hay and Silage Moisture Meter it would be best to check out our website for updated pricing. Here's a link through to the Wile-500, www.instrumentchoice.com.au/hay-and-silage-moisture-meter-wile-500. I hope this helps answer your query.

Hi, sorry to hear about your troubles. It may be best to email your issue directly to our team at scientists@instrumentchoice.com.au. They will be able to help you sort out your issue.

Hi, thanks for your question. HI98129 can be calibrated in a normal ambient room temperature environment. As long as this is below 50c room temperature won't effect the calibration of the meter. I hope this helps answer your question.

Hi Derekkchung, IC-435-0007-03 features a charging indicator light that will blink green while charging, when charged the LED will remain continuously on. I hope this answers your question

Hi Peaaah4069, thanks for your query. Hopefully we can help sort this out for you. On this it will be easier if you send in a photo of your device to our team on scientists@instrumentchoice.com.au the team are aware of your situation and are ready to help.

Hi micman4278, Thanks for the enquiry, at present, we are only able to offer the meters that can facilitate measuring High RF and High EMF, but are unable to offer medical advice. For this, I would recommend reviewing ARPANSA which is a Government website, or utilise peer reviewed journal articles from Medical bodies.

Yes, the Hanna HI98193 can measure BOD (Biochemical Oxygen Demand). It is specifically designed for measuring dissolved oxygen (DO) and BOD. It does this by calculating the difference between the initial and final DO concentration readings in a water sample. I hope this helps answer your question.

Hi, sorry to hear you are having issues connecting your weather station. Just to confirm, are you trying to connect to 2.4 GHz WIFI network? If you are still having issues it may be easier to contact our team directly via scientists@instrumentchoice.com.au I hope this helps resolve your issue.

Hi dobidob38, On this, an IR thermometer can only measure reflected surface energy and as such cannot measure ambient temperature unless it is a surface temperature.

Thank you very much 😊

Hi Jacob, thank you for bring this error to our attention. We will make the relevant changes to the description. For the latest software from Jaycar please see the link below. This should download the software automatically. www.jaycar.com.au/medias/sys_master/images/images/10130614321182/QM1598-softwareMain.zip Please reach out if there are any further issues.

There is a reset button near the battery compartment for the outdoor weather station. Are you able to press that? If you are still having issues, feel free to reach out to the team at scientists@instrumentchoice.com.au or reply to this comment. Hope this helps.

Thanks. That worked. 🙂

Hi dslthug, thank you for your question, on this, is this occurring with brand new batteries? When was the unit purchased from us?

Thanks for your comment on this we do have another video on the Vantage Vue that may be more helpful, ua-cam.com/video/70C35ivPSDM/v-deo.html

Hi, thank you for your question. The IC-HI981035 uses a flat sensor tip, that can't be used to penetrate a meat or a fish sample. If you would like to find a more suitable meter we have plenty to choose from on our website. www.instrumentchoice.com.au/instrument-choice/meters/water-quality-meters/ph-meters-2

Hi thanks for your comment. Can you please confirm the type of surface you are trying to measure the temperature of?

Glad you enjoyed it 👍

Thanks for your comment Rusty Rusty, we appreciate the feedback we will be sure to take this note to the rest of our upcoming videos. Feel free to have a look through another Davis support video we have made ua-cam.com/video/70C35ivPSDM/v-deo.html. If you are having issues with your weather station, feel free to contact the instrument choice team we’re here to help.

Hi A1, thank you for your enquiry. Sorry to hear about the SC-TN100-IR error. We would need to confirm the error code that comes up while calibrating. Feel free to respond here or contact us here, www.instrumentchoice.com.au/contact-us/

Thank you for your enquiry. The IC-Wile-78 is priced at $699+GST AUD. Please note we are based in Australia. For the latest pricing check out, www.instrumentchoice.com.au/grain-moisture-meter-measures-over-20-grains-and-seeds-the-crusher

Hi Chung, Thank you for your enquiry, on the Fluke 62 it will give a low battery warning alert in the top right of the screen. When that is displayed you will need to looking at replacing batteries.

Thank you.@@instrumentchoice

Good morning hygroeasylog Iot5, Thank you for your enquiry regarding your EL-WIFI-TH. With regards to this, this can be an issue with a number of things, such as firewall settings, bands that your router is running on along with encryption settings. The below link is a very useful guide that will take you through the most common problems here; www.lascarelectronics.com/media/7663/troubleshoot-common-connection-and-network-problems.pdf If you need any further assistance please reach out to our team at customer-service@instrumentchoice.com.au

Hi Pavan, Thank you for your query, on this, the only way is to download through the USB cable to a PC or Mac. There is no way around this, as this is the only communication method. If you have any further questions please feel free to reach out.

Thanks for your question, on this it will depend on where you are located, however within Australia the required levels are related to the standard below; AS/NZS 1680.2.4:1997 Interior lighting - Industrial tasks and processes It would also be worth touching base with your local Government body or Work Safety body to confirm what standard you are required to meet.

Thanks for getting in touch. It is possible this is an issue in the cloud account, can you please contact us on 1300 737 871 or emailing scientists@instrumentchoice.com.au and we can help you fix this up.

Thank you for replying to my question, I actually found the clock wa manually set, once I put in a time zone it went to the correct time@@instrumentchoice​

Great to hear@@ddugan64!

Thank you for your question, on this video the Electrolyte solution used is the HI7041S. This can be viewed on our website here; www.instrumentchoice.com.au/polarographic-dissolved-oxygen-electrolyte-solution-30-ml Then if you also require replacement membrane caps these can be viewed here; www.instrumentchoice.com.au/spare-dissolved-oxygen-screw-cap-membranes If you have any further questions please feel free to reach out.