You are arguably the best builder on the planet! I might have to try your fiberglass over 3d print technique someday. I hope you will take that to a proper runaway for the maiden, you are going to need a lot of runway for that weight.
love the plane! these are meant to go fast so dont turn to sharp and slow it to much or it will tip stall and not recover. i think that looks like what happened. just keep it fast it looks wonderful such a great job on this build! i do hope you fly it now and dont become a chicken! it is alot of work but no pressure! lol
Crazy nice! Especially with the stripes of red and reflective surface. And even the pilot turn his head. Couple on-board cameras on that plane and it will look super realistic. But you should have replaced Red Bull as sponsor with your logo.
Found your channel today as a recommendation from UA-cam. I like the Gee Bees and especially love the retro-futuristic R3, so I had to binge watch this build series. What a fantastic build! 😍 I sincerely hope it will fly as good as it looks! Fingers crossed for a successful maiden and many years of happy landings! 🤞❤️ Best regards from Sweden. 🇸🇪
@@AngelVenkov1 CG is located 147mm from the leading edge, i.e. 30% of the wing width. Fortunately, the heavy engine does all the work and you don't need to add extra weight
I like how you do most things just by eye. I’d have to measure everything 10 times and they still wouldn’t be right 😁 What do you do for work ? Hope it flys as good as it looks. Cheers Marko 🦘
Amazing job! trully state of art! Few questions: * Are you doing it for yourself? or is it some sort of unique order for somebody? * I started RC/FPV hobby recently mostly with electric motors, that petrol tank in the nose it can take a lot of petrol, how is CG affected during the flight when tank is depleted? * what vinil film are u using for covering? looks soo sleak and amazing * why don't you use some ELRS or TBS receivers? * and finally when is maiden flight?
Hello Many questions, I will try to answer: 1. I only make airplanes for myself. I don't do orders, it's just a hobby for me 2. The fuel tank and its state, full or empty, still counts for flying. But if you move the tank as close to CG as possible, the change is the least 3. Stickers made with 3M wrap film and wings- stabilizers covered with Oracover film 4. I only trust FUTABA electronics on expensive planes 5. Maiden flight is planned for May
@@markoroolaid Thank you for your detailed reply, dying to see how it will fly, though why May? more 3 months to go... maybe you meant March? Regarding receivers, as I know ELRS is top-notch industry standard these days, all race quads flying on them or on TBS Crossfire - which are somewhat similar. Losing control of the quad means a fatal crash, unlike a plane which can glide, so those protocols are super reliable. As I remember ELRS world record was around 50km range, so for your LOS flights, it should be more than enough. ELRS has PWM receivers as well as for Flight Controllers (SpeedyBee F405 is not bad at all). Also flying such amazing models just on LOS without FPV is just a crime :D I wish you would build an FPV plane for next time :) Happy to help and advice on modern electronics
![☀ Достойное сердце для серьезной птички [Speedybee F405 Wing Mini]](http://i.ytimg.com/vi/Ku9Na3thOuw/mqdefault.jpg)
These are some passionate builds. Attention to detail and patience. Awesome video, thanks for sharing these.
Vídeo del vuelo por favor. Buenos días.
all I got to say is WOW!
Absolutely beautiful can’t wait for the maiden. Bet she’s fast & smooth.
Wow what a beauty! You should be very proud of yourself. Well done!! Can't wait to see it fly!
thank you
It's Just Wonderfull, congratulations
thank you
Looking forward to the first flight!
this is absolutely amazing
thank you so much
Work of art, incredible build Marko!
You are arguably the best builder on the planet! I might have to try your fiberglass over 3d print technique someday. I hope you will take that to a proper runaway for the maiden, you are going to need a lot of runway for that weight.
Thank you so much
Absolutely beautiful work!!! Can't wait to see it fly. Looking forward to your next project. 😊
thank you so much
Immaculate, as always!
Brilliant love them Gee Bee right from the very start 👌.
👏👍👍👍Speechless... Wonderful job!!!
Perfecto eres un crack, para cuando lo veremos volando?
Muchas gracias, primer vuelo en mayo.
That airplane was a SPEED BEAST, but also a Death Trap. I like "Fortunate Son" ! Nice Tune, sir !!!
thanks
Magnifique , parfait , merci pour toutes ces videos
Bonjour
Je suis contente que mes vidéos vous plaisent, cela signifie beaucoup pour moi. Grand merci
love the plane! these are meant to go fast so dont turn to sharp and slow it to much or it will tip stall and not recover. i think that looks like what happened. just keep it fast it looks wonderful such a great job on this build! i do hope you fly it now and dont become a chicken! it is alot of work but no pressure! lol
Thank you very much
Congratulations on completing such a work of art. I hope it flies great. Keep up the good work.
Thank you so much 👍
Beautiful job Marko 👍
thank you
Super nice Airplane....
thanks
Simply awesome!!!
thank you very much
Du bist ein unglaublich professioneller Modellbaukünstler! Der beste, denn ich auf UA-cam gesehen habe!
Vielen Dank für diese schönen Worte. Danke vielmals
🇲🇫🇲🇫 extraordinaire ,very good job , congratulations 🇲🇫🇲🇫
Thank you very much
Wonderful job, as usual.
Your knowledge match perfectly with this kind of project.
Respect Maestro
Hi, Thank you
well done a work of art you are a very talented guy good luck with maiden not many could compete with that standard
Thank you so much 👍
Crazy nice! Especially with the stripes of red and reflective surface. And even the pilot turn his head. Couple on-board cameras on that plane and it will look super realistic.
But you should have replaced Red Bull as sponsor with your logo.
:):) ok, thank you very much
@@markoroolaid Talking about big planes. Have you watched the C-17 maiden flight on "Ramy RC" channel?
Yes, I saw it, amazing work @RamyRC
Beautiful job
Hi, thank you
Found your channel today as a recommendation from UA-cam. I like the Gee Bees and especially love the retro-futuristic R3, so I had to binge watch this build series. What a fantastic build! 😍
I sincerely hope it will fly as good as it looks! Fingers crossed for a successful maiden and many years of happy landings! 🤞❤️
Best regards from Sweden. 🇸🇪
Ok, thank you very much. And greetings from Estonia
Hi Marko Roolaid, impressive job I really enjoy watching it.
May I ask you how do you balance that beauty?
Thanks
Hi, first of all thank you very much. Now about balancing, are you interested in the CG theme?
@@markoroolaid Yes, im interested.
@@AngelVenkov1 CG is located 147mm from the leading edge, i.e. 30% of the wing width. Fortunately, the heavy engine does all the work and you don't need to add extra weight
@@markoroolaid Yeah, thanks. What device do you use to balance it?
nice looking plane!
thanks
Absolutely stunning😍
thanks
Wonderful work
👍👍👍thank you
Wonderfull, good job!
😊😊😊thank you
Absolument magnifique
Merci beaucoup, votre avis me touche beaucoup
Masterpice 👏👏👏👏 very nice building.
Thank you👍👍👍
Great job as always! I am very looking forward to the maiden flight 🙂 CYA
hi, thank you, a little patience, soon
Bravo sir
thank you
Nice !!!
Very Nice !!!
thank you
INCREDIBILE
thank you so much
Basicamente maravilloso!!!!! .Se puede hacer un modelo mas pequeño con los planos que proporcionas?
Hola, seguro que se puede hacer, solo hay que poner el dibujo en la escala adecuada.
Hervorragend! Gratulation.
thanks
SUBSCRIBED!!
thank you very much
👍
That’s a lot of work for a notoriously bad flying airframe. Hope yours flys much better than others on the market
Kind of an unnecessarily pessimistic comment.
I like how you do most things just by eye. I’d have to measure everything 10 times and they still wouldn’t be right 😁 What do you do for work ? Hope it flys as good as it looks. Cheers Marko 🦘
:):):)
nadie se puede enamorar de un avion: yo enamorado de el gee bee r3
Muchas gracias, personalmente me gusta mucho este avión. En mi opinión, la figura de avión más bonita jamás creada.
Comparto tu opinion Lazarito !! hermoso avion y un trabajo super profesional !!
It looks awesome and so professional !!! ❤ But where do you find all this time ???😮
It is often asked how this time is found. It's actually easy, if you're really interested in something, you'll find the time :)
Genial
thanks
What a anazing build! Wow! I also build airplanes and love the look of the aluminum foil. Where can I buy it?
It is a 3M Chrome Wrap film. In Estonia, I buy it from IGEPA Group
Thank you really much. The look is amazing.@@markoroolaid
So perfect. ❤
I start mine but 0.75 scale and it’ s a hard work
Thank you for your sharing
Waiting the first fly
How much for the final weight ?
Hi, takeoff weight 13kg
@@markoroolaid thank you Marko
Have a nice day
Amazing job! trully state of art! Few questions:
* Are you doing it for yourself? or is it some sort of unique order for somebody?
* I started RC/FPV hobby recently mostly with electric motors, that petrol tank in the nose it can take a lot of petrol, how is CG affected during the flight when tank is depleted?
* what vinil film are u using for covering? looks soo sleak and amazing
* why don't you use some ELRS or TBS receivers?
* and finally when is maiden flight?
Hello
Many questions, I will try to answer:
1. I only make airplanes for myself. I don't do orders, it's just a hobby for me
2. The fuel tank and its state, full or empty, still counts for flying. But if you move the tank as close to CG as possible, the change is the least
3. Stickers made with 3M wrap film and wings- stabilizers covered with Oracover film
4. I only trust FUTABA electronics on expensive planes
5. Maiden flight is planned for May
@@markoroolaid Thank you for your detailed reply, dying to see how it will fly, though why May? more 3 months to go... maybe you meant March?
Regarding receivers, as I know ELRS is top-notch industry standard these days, all race quads flying on them or on TBS Crossfire - which are somewhat similar. Losing control of the quad means a fatal crash, unlike a plane which can glide, so those protocols are super reliable. As I remember ELRS world record was around 50km range, so for your LOS flights, it should be more than enough. ELRS has PWM receivers as well as for Flight Controllers (SpeedyBee F405 is not bad at all).
Also flying such amazing models just on LOS without FPV is just a crime :D I wish you would build an FPV plane for next time :)
Happy to help and advice on modern electronics
Beautifull plane😍😍😍, where are the plans?
Hi, all my drawings are here grabcad.com/marko.roolaid-1/models
Was 3d printed fusealge simply sanded prior to paint or some other surface preparations? Thanks, Awesome stuff!
Hello
The fuselage is simply sanded. But still, it's a time-consuming job
You should make this a kit
ok ;)
Next project is 2x2 f3a?
👍👍👍🙂🙂🙂
Great and impressive job... Why should you wait until May for Maiden, weather ?
Hi, Weather is a problem yes, we still have deep winter here
Maidenflight?
Soon, soon
WHAT!? MAY??? 😨
yess
'Promo SM'