How to open Samsung Screwless TV with jig / tool. No screws on Samsung TV
Вставка
- Опубліковано 29 сер 2024
- If you would like to purchase TOOL / JIG to open your set, please go here:
For 1pc - paulstv.com/pr...
For 2pcs - paulstv.com/pr...
For 1pc - www.ebay.com/i...
For 2pcs - www.ebay.com/i...
Please note: Some model have screws on the bottom. Some units have double sided tape top corners.
Thank you for watching from Paul's TV Co.
Our online store: paulstv.com/
Our website: www.paulstvcomp...
WARNING
Do not use the tool at the bottom of the TV. There are metallic ribbon cables there and I tore mine when opening my TV and it can’t be repaired.
To the UA-camr - please add an overlay to your video saying that so others don’t break their TV like I did.
Why would you pass the tool at the bottom to begin with, there's no snap there.
@Truth Defender Because when you watch the video he doesn't use the tool there.
I made the same mistake trying to open from the bottom, which damaged the ribbon cables. I did this before I watched this video and I wish I had seen the video first.
The exact same thing happened to me, I started opening my TV at the bottom because I had seen this video and I thought this was the right method. This video caused more damage than good, I would have opened mine without any problem if I hadn't seen this. Thumb down
@@thegreatape884 Cause this is what the guy does in the video. It is supposed to be a tutorial or wtf
I just replaced the power supply of an UN55MU7000, and this video helped me remove the back easily.
Thank you for sharing your experience.
How ?
I never went to school for this and learned how myself. I got 3 Samsung 4k 65" curved tv's I use on my computer. It cost me less than 100$. If I payed for them new be over 2500$. People give these tv's away for free all the time as soon as anything happens to them. Best skill to have as hobby.
Thanks for the video, I'd never opened a screwless TV and this helped.
I needed to work on a broken Samsung 7 Series UHD TV that was given to me, but didn't have this tool. I looked at what was readily available in the house and the simple solution was 2 sets of Chinese "chopsticks" . The chopsticks worked well, so well in fact that I had the back off in 2 minutes or less. I have now added chopsticks to my toolbox!
Did you fix the TV? My un65tu7000 just started shutting off after a few minutes. I think it's a bad power supply or capacitors?
Nice idea with the 'chopsticks'. I did the same. Basically took the double chopsticks (before snapping into two sticks) and carved a bevel into the butt end of the sticks that closely matched the same profile as the Samsung plastic tool. Worked like a champ. Just took my time and went around the top and sides to get the distinctive SNAP each time one of the clips released.
My particular unit (QN75Q7FAM) also had permanent snap clips along the bottom side. A tool can NOT be used on these. Instead, once the top and sides are released, it's possible to carefully slide the back downward (about 1/8") to release the permanent bottom clips.
Trowing tv out of 5th floor does the magic too.
Brooooo😂😂😂😂
Do you still live on the 5th floor? 👍❤️💪🇮🇱🙏🕊️
Great video. You kept it simple and right to the point. Now I can repair mine with this video.
Thanks bro mere pass ye set aya he me khol nahi pa raha tha aapke video dekh ke easily kholdiya
A great help in my TV DIY repair, which saved me at least $200. Thanks.
Thank You.
You are a God of telly.
Samsung UHD7100 was flickering.
In process I've damaged some clips but case closed properly after all.
I've put some tape over 10th pin and tadam.problem fixed.
Thanks again. 😊
I used a large flat head screwdriver and it worked excellent. there's a technique you just have to slide and feel a little pressure and then twist.
Thank You so much.....!! How simple and easy that was. I had no idea the back came off like that.
Several amateurs and even professionals make this kind of mistake. Living and learning...👌
Friend thanks for your explanation, no words are needed to teach when you want to help other people
Excellent job
Great video... my dad who is a tech loved this!! 👍🏻
I got a 2019 4k 7 series 55 inch for free but it has a line so i will do this soon!
Got a freaking bug inside my tv I was very scared when I opened it up but I got the bug out and the TV is working and Im happy 🙂😁
How did you get the bug out?
I have one in mine and can't put up with it being there obviously
I got free TV with broken screen to try it out. Used plastic chopstick, not too bad. It can be opened faster than traditional TV with screws, but not sure how many times as plastic and wires can wear out. And if you unclip bezel, the screen will just fall off, be careful. I took it apart all the way to backlights, no screws and pretty fast. There is only one board, so swapping it is going to be quite expensive. Overall interesting design, will see how long these will last.
You are an angel. Sent to save us from the lucifer who designed this tv
😂 that made me lol. It IS a very stupid design by Samsung. I repair TVs and this shit is so annoying, especially on the curved TVs
theapocilip you’re so right. It took me 25 minutes and a lot of sweat to open UN55KU7000 Samsung TV lol.
@@xcross8537 dam, I'm about to do that now with the same model.
Did you have to swap out the main board or power board or both? Having trouble with picture only displaying in the center, the left and the right side of the screen is dead, you can slightly see the picture but barely. Please let me know. Thx in advance
@@MyReviews_karkan any advice on random flickering???
@@Lordsnake I have to see it as it could be cause by more one thing. Could he the source of the signal, the hdmi cable, or the main board.
This design will discourage about 90% of TV owners from ever opening/repair their units again. I almost gave up on my friend TV UN55KU7000 Samsung. I have worked on TVs since 2015 but this was the first one to make me question my favorite hobby.
Did you happen to have issues with trying to upgrade firmware on it thru USB?
this works 100. thank you so much saved me £500
You can use a putty knife once you get the end open then wiggle the back end so that the tv screen's weight unclips itself
Buen dia amigo Paul ,estoy muy agradecido por tu gran ayuda, hice la herramienta con plastico y me funciono de maravilla, ten tu like buen hombre.
Olle amigo la miq no enciende sabes como reparar esta placa o que checar
Thanks to your video, we were able to fabricate a tool.
Thanks again.
Thank you 🎉
guitar pick 80mm for the win
I think my motherboard needs to be replaced on mine. The One Connect, works for the remote and UI, but the actually port on the TV is messed up or something, and the HDMI ports on the OC don't recognize ANY inputs, and i've replaced it TWICE. Also, my ETHERNET port doesn't recognize when it's plugged into the internet. The TV works fine for the apps and there's nothing wrong with the screen. It's just useless for anything other than watching apps built into it. I can't plug my PC or PS4 into it, since it doesn't recognize them. It did once, but the picture was scrambled and floating off to the side and had no color, then disappeared. Maybe there's a loose plug on the board, from it being wall mounted and adjusted all the time. OPERATOR ERROR. thank you for making this vid! you are very much appreciated!!
Super das habe ich gesucht. Hoffentlich klappt das auch bei mir 😊😊
Nice expansion sir 👏🙌
Thx; couldn't wipe personal info. Wanted to get the circuit board out, neatly.
Thank you
Super! Hat alles funktioniert.
Hmm am thinking those plastic wedges they use for spacing tile will work their usually thrown away at salvage remodels or if your like me pocket them when go to salvage yards contractors trucks
Thank you somuch of your nice video sir
Hello can you please do a video on how to open up LG SNH5 subwoofer?
Thanks for the help on how to take off the back...... GUYS, get this! An ANT crawled in my monitor and died.... I have to go back in a clean it better and fix a piece of tape, but then back to new!!! Phew!!!
Hi Paul, the first, no screws, 65 "Samsung tv on my desk. The back cover opened with your guide video easily.
thank you
Regards, Kimmo
Jussila's TV and Video Service from Finland
Thanks
Hey thanks my man. I just picked up a curved one off the street and needed to crack it open! Like and sub on the way
Did you replace the main power board and fix your issue? Idk if u will even get this or I’ll see if you responded but I’m attempting to fox my cousins that died after a power outage! Yikes!!
Tank you
sushi stick is perfect to open this cover :D
:>) You are creative... :>)))
Great. I finally saw it from start to finish.
How long is the tip of the tool that u use in case u wanna use something similar
👍👍 🙏thank you for shortening and saving my time wasting🍀🐞🤪🙏
Thanks for the video. Managed to open it easily but could not find the Tcon board. Is it attached to the main board on this tv?
Thanks for sharing this video.i got an idea.
I'll try on UE40NU7122 led TV. I tried once, but I was afraid to shoot harder. Now I've seen you.
Thanks,
So basically you just carefully pry the side and top apart. I figured it would be something like that. I just brought home a 48" Samsung from the trash that won't turn on, not even a stand-by LED. I'm hoping it might just be the fuse, but when I looked at the back, I couldn't find any screws. I really hate it what companies try to get cute with the way their products are put together. Whenever I find a computer in the trash, it's like a Chinese puzzle box trying to figure out what tab I need to press to release each component.
tq for sharing this .
Hi, please advise how to remove the sounding metal frame
Some have 2way sticky tape along entire top edge that impedes removal abit. I removed most of it after back removal, since it 'balledup'
If ever manage to open the back cover put at least an external fan blower for cooling the bga heat sinker even if cut a hole to the back plastics and cause visible modifications this probably will extend way far the life of the television.For better results put a second one in the power supply unit area.This is my personal opinion and an idea for experimenting but my technical skills are above any hobbyist or a casual user,so beware a lot while dealing with these fragile appliances.
Hello good morning can you do a video on how to get the lines running down the whole screen. What could be the problem and how diy?
thank u brother super
Thank you bhai
I have almost exactly the same television except mine is a 75 inch. Not sure if you know the answer to this (or anybody who knows about this TV) but my symptoms are that when you go to turn it on, the (Samsung) logo comes on solid at first… and then these horizontal lines develop (which chops up and dims the picture a bit)... and then the TV shuts off and goes through that cycle again.
Usually for 10 minutes or so, it reboots, over and over again.
When it's just about to turn on and work (which it does usually in less than 15 minutes of letting it cycle like this) you start to see the main menu screen, etc. and then the horizontal lines develop and then it shuts off ... and restarts and then FINALLY, it comes on for a few seconds (with the sound of whatever the TV show is that's playing or whatever) then, it usually goes through one more cycle... and then it stays on (and works perfectly from that point on unless you turn the TV off again).
I'm wondering if that's a power board issue (rather than a main board issue).
According to the seller who sold it to me, It did start occurring, just after a lightning storm.
Do you think replacing the whole power board would do the trick in fixing it? Short of that, is there a particular part (or two) on the power board that would usually be the culprit that I could replace for a lot less money than replacing the whole power board? Even if I have to pay about 125 bucks for a new board, I think it would be worth it. It's a great TV once it stays on.
Thanks!
Thanks much for the video! For the 2020 65" Curved/82"-85 Flat models, this process is same? I want crack mine open to do a small mod on the speakers but super afraid of the whole process.. plus they are huge. Thanks again:)
What did you end up modding it with?
Źle otwierasz, podważasz każdy róg i haczykiem wyciągasz druty, dzięki czemu nie łamiesz zatrzasków.
chopstick ftw- thanks e noffz!
Thank you very much sir
Hello Paul, im subsribe now. Thanks for your nice video. 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Don’t suppose you have one on how to take the circuit board off do you friend. 🙏
Do you know if this is dual voltage? 110-240v? I know the back of it states 110v 50/60hz but the panel may read otherwise on the inside. I’ve heard most modern Samsung tvs are dual voltage.
At least it wasn’t glued! These Samsung’s fail so frequently that the tool should come with every TV. No more Samsung’s for me (4). Latest purchase was a Sony. The Samsung’s failed right about the 2 year mark.
Mine failed after 10 months! Brand new right out of the box.
It wouldn't fail as quick if you put a good power surge protector on it and replace it every two years.
@@island7314 make sure to put a good power surge protector on every electronic device you have. They'd last much longer. These assholes design them to last a lot less, but a good surge does it. I've had mine for well over 3 years now and it is still pulling strong.
My UN55KS8000F just failed. Just below 3 years old. Pretty sure it's a power distribution problem. Was looking for the way to disassemble it, but every attempt resulted in a small separation of adhesive.
Confident that it wasn't supposed to separate, I had to head on here to look for the solution. I don't have a 'jig' tool, but I have other useful tools that could assist just the same. Gonna look for any leak caps or other damaged components to see if I can find the issue, as well as meter all the inputs/outputs to help identify anything that's incorrect.
Thank you. Very helpful.
Great intro 😂
silent movies are a thing of the past. a little narration please
TV Maintenance ASMR 😉😃
Super!
How sturdy is the LCD? Back panel on a UN65NU6070 is on there real good. Don't want to break the LCD.
That's thanks thanks bro
Thanks, at least it’s not glued!
Thank u!
Good sir ji
Hell yea! Thank you brother!
Good Day!!! What do you call that tool that you used?
Paul, thank you.
Have you guys got any advice on random flickering?
If your wide screen TV is mounted on a wall, as opposed to standing on a table or stand, will the screen life be shortened?
Hey Paul,
I have a samsung Nu7100. Center of the screen LEDs work but not the left or right of screen. Those side are barely viewable. Is it the power board that is at fault or.....
Hope you are well during these uncertain times. Stay health and safe.
I opened mine easily, with a chopstick!
I was thinking the same thing when I looked up what the security jig looked like 😂
That tool Samsung uses cost $25. Awful.
Hello Sir
I have a Samsung UE55MU7045 TV which won’t turn on. When I plug the power in the backlights blink for a second then go off, then it’s blank for a seconds then it flashes the backlights and then goes black and it just repeats this non stop.
What could be the problem
thanks
best regard
fred
Thank you 🙏
Removing samsung tv vertical lines
my samsung tv ue65f9005stxxe some time working but some time not. every thing ok no any demage , i ry to fix but nothing change . any help will be appreciate. thanks
All well and good.
What parts go bad most frequently within a year?
for nothing in a year but in two years its edge led strip
@@BELLEVERIC One more strike on everything samsung manufactures.
They should get their collective act together
Within the first few years, Samsungs have a trend of power supply issues. The orange logic board (on the left at 2:35) is the one responsible for power distribution; the issue is likely there.
Any instructions how to remove dead flies? I have 9 of them at the bottom of the screen (Samsung Q70R)
Screen has to be pull a part. Not an easy task. Not recommended if you are not a TV tech.
what is the meuasurement of the snap lock from the edge?
Guys I got all clips off and trying to lift back panel off but it seems like there's something internal attached where the one connect input sits. Should I just be able yo life this off?
Thanks DEA sir
Hi I live providenciales I follow you I m an Electronician too
What if I need to replace the back plastic cover and bezel? Where do I purchase?
Hi bro.. glad to see ur video.. it was some what eg on 22 inch lg.. but a damn model i got for service is lg43lj5w3t with back light problem.. i m afraod why this bloody sycho experts designing and shit companies are approving the models.. they should know no technology is permanent and should undergo service by others where they fails to give service...
Where I can buy this plastic jigg tools
I am having a problem with my Samsung 65in tv. I have had 4 lenses fall off the set already. I opened the set when I had 2 of them fall off remove the speakers and frames but could not figure out how to open it further to get at the lenses so I put it all back together. Well now there are 4 off. Do you have any instructions or a site that shows how to do it. I understand that it is risky but dont like the way it looks.
Steve
Perfectly.
Ok guys, my UN75MU9000 does not have clips but seem to be held together on sides and top with double sided tape. Any of you come across this, and if so how did you get it open?
I figured it all out.
You are awesome, thank you for your time
I have a vertical greens and blue colors, keep moving any idea what to change ribbons looks perfect i clean anyway with alcohol 50% iso
Any other ideas main board or power board, please help le is out of warranty in November,
Hi. How do u remove the TV stand/pedestal from this TV? Its also screwless. I have a ru9000 with the same back and need help with this.
How about a 70" LG. Are the screws just the ones around the perimeter?
I think this is scrap TV damage TV showing open like this but in good condition TV open like this side cof damaged screen also damaged.