Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website for the inclined raiser. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it. Waiting for a quick response
Hi Vinay, hope Pradeep is recovering well. Did you got the number plate from the big wing dealer, not from RTO office because usually we get it from rto office.
@ Rana Biswas - usually the RTO office sends the number plate to the respective bigwing dealer in batches, who then will intimate the customer and the customer has to go the showroom and get it fixed - for customers staying far off, the dealer will courier it to the customer’s address, but the local RTO dispatches it to the bigwing dealer !
Hi Vinay, i have encountered that on hills having lots of turns and curves, when i ride the bike i fell shoulder pain i suspect the sitting posture. Will these bar raisers help ? Your review will definitely help.
Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it
I'm 5 feet 3 inches. I've been riding Apache RTR160 Since 2008. Just brought highness 1 week ago. Uncomfortable & shoulder pain. Which riser should I go for.... Inclined or straight?
Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it. Please do reply
Hi, same here... Got CB350rs Red... And its in my parking whole day😄... One question from me, i feel my bike gear shift is a bit harder than what is expected after watching reviews , is it same for all 350Rs or issue is with mine..? 😕
@@Surendra_suni If you're upgrading from a 150 cc bike, the gearshifts will feel a little harder but that's the way how it's supposed to be! You'll get used to it soon and also, the gearbox will become much smoother once you ride it more and more 😎
@motovin77 Hi Vinay, since lockdown like conditions are back in many parts of the country, and many are forced to work from home and not venture out. Can you please make a video suggesting how to upkeep the bikes during lockdown conditions. Specifically in the case of CB350 since it is BS6 compliant and has a fuel injection and not a carburateur - meaning thereby that you cannot suck out fuel from the tank while it is stationery for a large number of days nor can you somehow use the mechanism to restart the engine once the lockdown ends. Also, there have been battery issues with the CB350. Battery will drain out when not in use. Further, the bike does not have a kick start. All these factors make it important that we regularly upkeep the bike and prevent it from stalling. Hence, a video would be of great help. One video in this regard (link below) is helpful ua-cam.com/video/flgkPVr9LoI/v-deo.html
@ Furquan Ahemad - this is what I follow ..request Vinay to give his valuable inputs 1. Every 4-5 days, I start the bike and keep the engine running for a few minutes 2. I take the bike for a short spin - may be a coupe of kilometres in my neighbourhood , with precautions of course @Vinay - anything else needs to be done..pls let me know..thanks 👍🏼🙏
🙏 Vioce is not to clear and ur accent is dull. Not to joy full and there is lack excitement in yoy. 👎👎👎 Improve ur personality Otherwise ur video is quite informative. 👍👍.
Good to note that Pradeep has recovered and is raring to ride again ..👍🏼😊
I too have ordered . Let me check the bolts size tomorrow.. thanks for the info
Please take extra care, Vinay. Glad to hear that Pradeep is recovering well.
Stay safe.
I greatly appreciate your bike maintenance and the usefull information👍.
Is there any way to install Clip on handlebars. I think they'd look cool
Got them installed today . Looking good , had to reallign the clutch wire as it was a bit tight due to leg guard .
Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website for the inclined raiser. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it. Waiting for a quick response
Hi Vinay, hope Pradeep is recovering well. Did you got the number plate from the big wing dealer, not from RTO office because usually we get it from rto office.
@ Rana Biswas - usually the RTO office sends the number plate to the respective bigwing dealer in batches, who then will intimate the customer and the customer has to go the showroom and get it fixed - for customers staying far off, the dealer will courier it to the customer’s address, but the local RTO dispatches it to the bigwing dealer !
It was provided by Bigwing dealer.
I came from office running like a kid to do the DIY, boom..!! saw the bolts and i was like...WHAT..!!
Yes my friend, I was as much disappointed as I kept time this morning to do this...
Hi Vinay, i have encountered that on hills having lots of turns and curves, when i ride the bike i fell shoulder pain i suspect the sitting posture. Will these bar raisers help ? Your review will definitely help.
Absolutely it will help make the sitting position more relaxed
I too had installed this one long ago. If they had launched the inclined ones back then I would have gone for that. But these are really good.
Inclined ones ruins the look bro. It's good that you have these ones installed.
I had ordered angle raiser, fitted, working well
What is your height. Why not straight
Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it
@@yashnayak3230 no I didn't had any issues , it was done myself, rerouting of cables was not necessary, however I am not an expert
Great going… thanks for the info…
I'm 5 feet 3 inches. I've been riding Apache RTR160 Since 2008. Just brought highness 1 week ago. Uncomfortable & shoulder pain. Which riser should I go for.... Inclined or straight?
Inclined ones should help for your heght
@@motovin77 I also thought so. Thank you for your prompt response.
@@motovin77why? What is the difference?
Sir how is the handle bar risers. Is it worth installing and is there any problems for cable. how comfortable after installing the raisers
Sir thanks for your concern .sir think now you’re better take care sir 👍👍👍
How was ur uncle's health. Sir yevlo km ottirukkinga. [How many km covered cb350] Anandhakumar from tamilnadu. Thanks and regards.
Uncle is in still in ICU and recovering, I have completed 7000 km on CB 350 so far.
Hi Vinay. In very early video you installed mud flap with 3mm tape. Is it still working or you found some different solution. Please reply.
Yes the mudflap is still intact with that 3M tape. It's been 7000 km so far.
Please do a review on the riding gears you use
Sure, will do soon
Hi Pradeep, any solution for the tank I am worrying about will be getting scratches on it in the future.
Best thing is to clean it with plain water and never dry wipe over dust.
Good to use good quality wax to protect the finish.
That was a sad miss from carbon racing. Thanks for showing us the procedure
Sir can I install dual horn on my hiness DLX?
Is Can Lapse My bike warranty?
Can be done, Bigwing service center itself will do it for you.
how to maintain engine paint and other metal and chrome parts?
Will do a video on the same.
Do u feel steering damper is required for this?
My height is 5.11ft ... which is best for me ? Straight handlebar or inclined handlebar.
Definitely straight ones.
Sir hi, i have also installed the handle riser and it is worked nice sir
Sir please let us know how tough it was to reroute the accelerator and Clutch cable from outside the Forks as mentioned on the carbon racing website. Can it be done by a local mechanic or it has to done at bigwing dealers. How much they charge for it. Please do reply
how much is the carbon risers cost?
I would like to check them on my Hness too
1200
What is ur views on the carbon racing handlebar weights?
Sir, my height is 169-170 cms. Should I go with Straight or Inclined Handlebar risers?
Definitely inclined.
Thanks for the useful video. I have just ordered the one after watching this video. Hope I will receive correct set of bolts. Stay safe
Carbon racing addressed the confusion and sending replacement bolts
Why Vinay-the energy level is very low? May b because of the covid situation.
Yes my friend, it's sad to see lot of my friend, colleagues and relatives also going through covid.
Take care. We all will come out of it. I m sure. Its just a matter of 3 or 4 months.
The vaccination process is very slow. Thats the main issue. Govt. has to speed it up and make sure all get 2 doses ASAP
@@suhassirajuddin8101 absolutely my friend
Can these be used on the RS as well??
Yes
@@motovin77 great. I'll be getting my RS soon. Will try it out then.
HOW IS PRADIP BHAI NOW.YOU TOO TAKE MUCH CARE FOR YOU AND YOUR FAMILY TOO.
Sir , i taking the liberty to ask u a question , did you sell your cb?
Given it to my cousin sir 😊
I took delivery of my Cb350rs and boom, a lockdown... ://
Hopefully you get to ride it soon, once things get better
Hi, same here... Got CB350rs Red... And its in my parking whole day😄... One question from me, i feel my bike gear shift is a bit harder than what is expected after watching reviews , is it same for all 350Rs or issue is with mine..? 😕
@@Surendra_suni give it some time to break-in bud..
I make sure that I at least ride a km or 2 everyday..
@@Surendra_suni If you're upgrading from a 150 cc bike, the gearshifts will feel a little harder but that's the way how it's supposed to be! You'll get used to it soon and also, the gearbox will become much smoother once you ride it more and more 😎
Motovin77 plesae tell me abt matte color, whether I need more care in handling matte green. Which colour is better gloss or matte?
both are good but easy to maintain is gloss.
Hi please do the video again once you receive right bolts 🔩 sir please
Happened with me too. Utterly Disappointed.
Sir how is friend who is affected with covid
Her recovered now.
@motovin77 Hi Vinay, since lockdown like conditions are back in many parts of the country, and many are forced to work from home and not venture out. Can you please make a video suggesting how to upkeep the bikes during lockdown conditions. Specifically in the case of CB350 since it is BS6 compliant and has a fuel injection and not a carburateur - meaning thereby that you cannot suck out fuel from the tank while it is stationery for a large number of days nor can you somehow use the mechanism to restart the engine once the lockdown ends. Also, there have been battery issues with the CB350. Battery will drain out when not in use. Further, the bike does not have a kick start. All these factors make it important that we regularly upkeep the bike and prevent it from stalling. Hence, a video would be of great help. One video in this regard (link below) is helpful
ua-cam.com/video/flgkPVr9LoI/v-deo.html
@ Furquan Ahemad - this is what I follow ..request Vinay to give his valuable inputs
1. Every 4-5 days, I start the bike and keep the engine running for a few minutes
2. I take the bike for a short spin - may be a coupe of kilometres in my neighbourhood , with precautions of course
@Vinay - anything else needs to be done..pls let me know..thanks 👍🏼🙏
if you are planning to keep it for more than 4 5 days keep it in central stand
Will do one video on this topic 👍
@@harshaeswaraiah5790 If you are riding it around, that's all is required.
Apart from other basic checks, Air, Oil, brake fluid etc.
2x speed sir ul get more subscribers
🙏
Vioce is not to clear and ur accent is dull.
Not to joy full and there is lack excitement in yoy.
👎👎👎
Improve ur personality
Otherwise ur video is quite informative.
👍👍.
Yes my friend, agreed 👍