Це відео не доступне.
Перепрошуємо.
EASIEST Carburetor Rebuild for Honda Shadow: Part 4 of 4
Вставка
- Опубліковано 21 лют 2019
- This is part 4 of a 4 part series.
Part 1: • EASIEST Carburetor Reb...
Part 2: • EASIEST Carburetor Reb...
Part 3: • EASIEST Carburetor Reb...
-- SHOP OUR CARB REBUILD KITS --
Complete Stock Carb Rebuild Kit - Honda Shadow VT600 & VT750 - Dual Carb: shoptjbc.com/c...
Complete Stock Carb Rebuild Kit - Honda Shadow VT600 & VT750 - Single Carb: shoptjbc.com/p...
Complete Performance Carb Rebuild Kit - Honda Shadow VT600 & VT750 - Single and Dual Carb: shoptjbc.com/p...
TJ Brutal Customs Carb Rebuild & Reconditioning Service (Reservation ONLY): shoptjbc.com/p...
-- IN THIS VIDEO --
Part 4: In this episode, TJ completes the carb assembly, shows how to install the Rebuild Kit and explains how to keep your carbs healthy. In this video, he's using a set of dual carbs from a Honda Shadow VT600.
Make sure you're subscribed to our channel to get ALL our updates! / tjbrutalcustoms
For more info, check out shoptjbc.com/
---
Like what you see here? SUBSCRIBE to our channel, then make sure you’re following us everywhere else!
Get all the latest updates on new product releases via our Facebook page: / tjbrutalcustoms
Then follow us on Instagram, for all the off-color shit and exclusive content you LOVE: / tjbrutalcustoms
On the hunt for LEGIT BADASS CUSTOM HONDA SHADOW PARTS?! We’ve got ‘em! Check out our shop: shoptjbc.com/. (While you’re there, SUBSCRIBE to our email list at the bottom of the page.)
How far in do you turn the idle adjustment screw on initial setup after a rebuild, so you can get the bike running to adjust idle speed?
@@TJBRUTALCUSTOMS thank you, that is good to know 👍
Best tutorial by far! Again I wish it was available before I did my carb rebuild. I would have avoided many mistakes.
You should make more instructional videos like this they would be a big help. There is not many quality shadow videos on UA-cam.
TJ, you are a godsend for these videos. 🤘
Again! Awesome series. Thanks so much. I feel less intimidated to tackle my first bike.
These are GREAT videos! I know where I’m going when I need parts like these once I get my Shadow. Thanks for sharing!
Awesome vid! Did not know about the direction of the holes in the slide until this!
Would you be able to do a video on how to check the timing? Every mechanic I went to couldn’t do it.
I was able to take apart and clean my carburetor like a pro because of this video but I want to check what ports to plug off because I have an 03 Shadow Ace 750 California model but I want to say my carburetor looks EXACTLY like this one so Im a little confused. My carb rebuild kit from you is due to arrive today but I cleaned all my jets and everything anyway just to save them. Thank you for these videos
Thank you sir your awesome 😎
You are!
@@TJBRUTALCUSTOMS no sir that is all you and I'm genuinely thankful you helped me rebuild my first carb
„I just use spit…it dryes out“ I had to laugh so much at that point.
Really cool video series btw. Will have more confidence when I’ll be doing mine.
thanks for doing this. i already had a good handle on these carbs but i definitely learned a couple of things here. good job.
Excellent, detailed carb rebuild video. I´ve learned alot!!. Hey, can you do a video on bent butterflies replacement. Thanks a million from Shadow rider, Bahamas!!
Great stuff that really made it look easy I'll be! Getting a kit from you keep up the good work
While turning the airflow mixture screw out. Is it 2 1/2 turns out from bottom. Or is it 2 1/2 after setting it to one?
from seated gently
super video
What if you have stock pipes no baffles and what to up grade to stacks?
Hey TJ thank you for this tutorial😁👍
hey bro can i use this rebuild kit n stacks on a dual carb vt1100?
Following
GREAT tutorial.
Really appreciate all your videos, is s lot of usefull information... I'm not an natural English speaker so it's probable that you mention in this video what I'm going to ask but.. here I go.
How many breathing or whatever connections should I cancel on my double carbs when I quit all the evaporation shit things... And Wich ones?. Did you have a pic or something?. Thank u so mach dude.
Are the boots you sell for carbs also for the VT1100’s. I’ve never held or worked on the 650 and 7’s so i am unsure if the are exactly the same.
Would one shim under the needle be good enough, what do you reckon?
So.....what's the instrumental from? It's a pretty sweet track
I want to know this as well! At first I thought it was FFDP with no vocals but it's not.
So I have what appears to be a double vacuum line coming out of the top of the carb, but I'm not sure where they go??? the exploded view calls them "air tubes"
Same question. The hose connected to plastic barb was chewed in half and only 2 inches long. I never found the rest of the hose. On 2003 VT1100C2
Are there supposed to be jets left with your jet kits?
I have 02 shadow vt1100c, carburetor orpheus is shot and pressed in, we can't get to them,can you build if sent to you thanks
TJ I just cleaned and replaced everything . Not leaks fires up with choke but won’t rev up or run with choke off what did I do
Man, TJ! It's very much a Monday in Edmonton, Alberta, Canada! I meant to ask what it might cost to have the CARBURETOR for that '84 Shadow VT500C. Thanks, dude! - GK
I’m having trouble getting my carbs off the boots that go to the engine. What kind of grease do you put on your boots that go to the carb?????
@@TJBRUTALCUSTOMS
Do the boots you have also fit the Vt1100c2’s???
Will these stacks work on an 1100c?
My needle jets wont pop out. Any suggestions? Ive sprayed it liberally with carb cleaner. Is that enough or do I need to get it out?
I am looking to see if a larger fuel tank will fit on my vt 600 is there anything pout there or do I just have to carry an extra gas can
Hey man. Can you make a video of putting the carbs back on the bike. I have a hose that I cannot figure out how to route it back to the gas take. Or do you have a good reference tool?
I watched this whole series and it is fantastic! This may be a silly question, but how different are the carbs for the 600 and 750 to a vt500c set of carbs? I just picked up an 83 Shadow vt500c and she needs a bit of love in the carb section. I appreciate any info! Thanks again for the epic walkthrough!
I have an 03 Shadow ACE 750. New boots, wide open exhaust, velocity stacks.145 main, 45 pilot, 2 shims on each needle. Fuel mixture screws 2 1/2 turns out. I cannot get it to idle to even start the tuning process. PLEASE HELP! Lol
hello tj, ,, e removed the carburetors like 9 times trying to make the motorcycle 1999 honda shadow tourer vt1100 not run lean and still have that problem. I installed new jets 180 and 175 dyno and the e-clip in position 4 of the needle and is still running lean. no power ,, lazy ,,,,,, and the mixture screw I have tried it in a round and a half ,,, in two turns up to 3 turns out. And when I go to the speed of 75mph and 80mph, the engine starts to fail as if there was no gas or electricity problem. I'm frustrated
Hi TJ, I have a 2002 honda shadow 750 ace, open exhaust, stock intake, has a little back fire on decel. Recommandation on carb. jet kit rebuild? Love your vids!!
hey i just got the black cutout pipes and velocity stacks with the tuning kit with the long mixture screws and i noticed it bottoms out on the throttle side against the throttle assembly is that normal and when going wot it hits against the long mixture screw is that normal? i have a 02 vt750dc shadow spirit
@TJBRUTALCUSTOMS
I have a few questions that have to do with some vacuum plugs/air system on my bike as I try to jet and rebuild the carbs and install a velocity stack(2004 Aero single carb, open backdraft exhaust). I recently installed your PAIR block off plates and removed that whole system. I have 2 hoses that run into a T from the carb that then went into the pair system, can I just plug them off at the carb? I also have a hose running from the float bowl for venting, do you just leave that completely open with no hose? it currently runs to a T then goes to atmosphere right by the carb and the back of the bike. Last question is what do I do with the large hose that ran from the top of the back cylinder that used to go to the old airbox tear drop filter?
Nice video's TJ. Do you have any tips on multi-carb engines. I have a 98' Valkyrie, removed and cleaned the heck out of the carbs. Idle hangs when goosing throttle and while riding there's some popping in the exhaust. I sync'd the carbs, now want to tune up the pilot jets. My only problem is no one has a method for adj 6 carbs. Any suggestions. Thanks
So after rebuilding my carbs. I’ve come to I’m too lean. And after re watching this video. I tightened down the air fuel mixture screw. Listen guys. I’m still learning.
With is one of your carb kits and the bigger jets does it matter if the exhaust is fully open or has baffles in it
Howdy!!! I got a VT750CDD, California emissions BS.... Do you have a guide to show which vents on the Carb I can block? I deleted the EVAP system from the bike and now rebuilding the Carb. (Sadly not with one of your kits, I only just found your channel...)
I don't have an ultrasonic badass cleaner. Whats the best way for me to clean my carb?
@@TJBRUTALCUSTOMS you rock! And thank you do much for the performance kit and stack you shipped today!!
The stacks are used instead of the air filter?
How about the brass connectors that screw just above the bowl screw?
Friend is awesome this !!!, i from Mexico currently i have a vlx 600 mod 93, the thing is that the last mechanic broke the carburetor, i think that is the same model that you show in your video, anyway, here in Mexico i have not find the double carburetor for my vlx, do you have one to sell me? Or do you know a site or place when i can find it?
Single carb it. There are lots of Honda Shadow/Steed that are being made into single carb. I have a Honda Steed 400, pretty similar to shadow. Improvise manifold with a 32mm carb. Works like a charm
I have a 750 Shadow Spirit with stock intake and open Cobra exhaust. What jetting do you recommend? I just purchased your performance rebuild kit.
Hey congrat for your videos especially those about dual carb performance kit. I’ve got two questions for you. I own a PC 800 from 1998 and I’d like to know if I can install your kit on the carb? Is it a good idea given that the engine is only 57 HP?
Thanks for you answer.
So this might seem like a silly question but I’m just getting into bike. I have a 1984 shadow vt700 is this the same kit? Everything looks the same
Super-great series of vids for the carb rebuild, TJ! Thanks so much! What would it cost to have you rebuild a '84 Shadow VT500C? I'm going to rebuild mine using your vids as guidance. I know someone who just wants a PRO to rebuild his. What can I tell him, big dawg?
Will I need 2 velocity stacks for this kit ?
So the only filter is the screen under the stacks ? During a hard rain wouldn't water get into the carburetor ? I can't see how this would be good for the carbs at all especially is you have to travel on a dirt road or even a gravel road for any distance . Does anyone make a short regular filter that would fit over the air intake ?
I have a 1998 with the twin carbs and I was told by a honda mechanic that gravity fed gas from the tank on a twin carb would not work . He said it would bog down and run like it was running out of gas . Is that True ? The reason I'm asking is for some reason I have a fuel pump under the seat and I think its going bad . The line outlet on the tank is higher than the inlet of the T on the carb and there is enough room to put a small filter and a line from the tank to the carb . Have you ever tried running a 600 cc with the twin carbs with out the fuel pump and only gravity fed ?
Thank you!!!
Is it possible to put a 240 rear tire on a 600?
Hey I tried to send a message through your website but it doesn’t let me without a part number so I will ask you through UA-cam when are you guys going to restock the carb kit ?
Great videos series. What is your thoughts on the timing mod on the shadow?
Where can I find that carb shield mount?
Ive always been told there’s no stupid ? But I’ve misplaced the Allen wrench that came with the stacks, Ive tried every metric, standard and have not found one to fit. Anyone have a clue what size the Allen is? TJ HELP! Got any extras? Don’t care what it cost!! Thanks
I went to contact you on your website but you can’t send a message without a order number, I have a 1100 but the kit is for 600-750 the carbs look identical I was wondering if your kit would work I really wanted to install these parts
Sweet series. Did the customer already drill out the air/fuel screw caps or did you do that on this carb and maybe I missed it in the vids.
Is it the same way for a 1100 ?
Hey man awesome video question can I use does long mixing screws for my 94 shadow 1100
Nice can’t wait let us know so I can get them
On the needle shims do you remove the plastic spacer that's already on there? You didn't show much about that.
@@TJBRUTALCUSTOMS ok cool mine had some plastic spacers on there I took them off.
Hey man how’s it going. So I just bought a 2003 Honda shadow 750 ACE and I have been doing a little research on it which I Gotta say is pretty bad ass. And I came across your videos then quickly after subscribed. So I’ve checked out your website and I can see that you can buy rebuild performance kits but I was wondering if you would sell me a carburetter with the performance kit already installed in the carburetor?
Idk about using grease there....maybe vaseline instead?
How many microns is this air filter mesh?
this screen have 40 mesh or more ?
ok bro, i need help! you can come in Alberta Canada?
Hello, a question, I have a 2003 Honda Shadow Spirit 750 cc, that kit to repair the carburetor works for it.
Hello! i dont see a question here. Whats the question?
I have a 2003 Honda Shadow Spirit, that carburetor kit works for my bike
can you phrase this as a question? What carburetor kit are you referring to? thank you!
@@TJBRUTALCUSTOMS I would like to know if that kit you sell fits my 2003 honda shadow spirit 750
Hello just wanna ask how much the cost a set of carb kit and a velosity stack? Am from philippines.
I have honda steed 400
Hi, but both the pilot jet and the main jet are 45?
im sorry i dont understand. what is the question?
Forgive my english, I meant the size of the pilot jet and main jet is both 45?@@TJBRUTALCUSTOMS
I keep trying to buy ur kit online man it won’t let me. But if I buy the stock oem kit are the tuning screws still 2 1/2 turns from snug
Well I’m debating on getting the performance one I just don’t want to learn how to sync the carbs and spend more money. Do you know where I can find the spec for stock throttle position
Is their another way I can buy your stock eom kit for a 750 my bank won’t let me buy it for what ever reason
I’ve tried 6 times and all 6 I get a return funds
Can I just send my carbs to you and you do for me🙏🏿🙏🏿🙏🏿
I was just thinking about that...
I wish i have ur currency,so im not having so much difficulties in buying those kits..way to far expensive,.watching this, i just can seat next to my vlx dreaming when was my first ride..sad...
I looked at the prices and laughed.
Dude what's the song ?
And why do you mean, start tuning. I CAN NOT figure out what to tune and how to do it
@@TJBRUTALCUSTOMS okay. So from what I’ve gathered. I’m experiencing lean at roughly 3/4 throttle. So I address the main jet with a larger one ? And that’s now tuning works?
@@TJBRUTALCUSTOMS I know you get “dumb” questions a lot. I just appreciate the patience you have. Thanks
2:00
I bet those velocity stacks do absolutely nothing as far as velocity goes. just hold the screen in place.