Great mill you got there. I pretty much run the same setup My edger box doesn’t move like yours I only got 9 inches or the log will hit Great design yours is. New subscriber today
Nice video. What is the capacity of the little loader and where did you get it and what did you pay for it? If you don't mind me asking. That sawmill looks very familiar, I believe I sawed several loads of ties on it, my favorite sawmill of all I have ever sawed on. Did you get it from Jeremy Callahan?
Hello Kelly! This is the mill we got from Jeremy that you have cut on before. Donald is my dad. The little loader will pick up 15 ties but not 20 and will pick up 20 cants and handles bundles of lumber. We bought it out of Clarksville Tennessee from a dealer and it’s been a great machine. I believe it’s the 35 size and if you got one size bigger it would be great. I’m not sure what we payed for it but it was pre Covid so I’m sure the price has gone up.
Yeah dad is always fussing at me to clean it up but I'm the only one on that end of the mill and he gets a little carried away sometimes and covers me up. About once a week I bring the loader over and clean it up
@@TheOutdoorRight Well I wasn’t Putin you down for sure, my Dad did that for me sometimes……..lol….you guys have a nice set there thanx for sharing your day
It’s from the mast that carries the hydraulics to the carriage. We don’t keep the rain off the mill just the controls that are inside the saw cab under a roof. The lumber is stacked on 3/4 thick sticks between layers to help with air drying. Rain on the top of the stack doesn’t degrade the lumber because it evaporates pretty quick.
I wish I could run an electric motor but unfortunately I don’t have access to three phase power. The power unit is a Detroit 8v92 it cranks a lot of horsepower
very slow mill saw cutting rough teeth needs side dressing leaving big saw marks on timber we would never put up with that in australia people would not buy that stuf they talk about rough sawn timber that is taking rough to the extreme.
Side dressing? I've never heard of that. We used to sewage and stone the old tool steel teeth but I'm sure most use carbide teeth these days. Keyboard worrier no doubt.lol
Do y’all like the sawmill or logging videos better?
sawing
Sawmill!
First time watching your video. Thank you from northwest Pa.
Thanks for watching!
Great mill you got there. I pretty much run the same setup My edger box doesn’t move like yours I only got 9 inches or the log will hit Great design yours is. New subscriber today
Thanks!! This mill is pretty much everything I can ask for! If I had about 4-5 good hands I could really push out some product!
Awesome what you and your father are doing must put roof up over that equipment more videos
@robertallen6848 yes we do! We are planning on covering it up as soon as possible
good video nice sawing.
Thanks 👍
New subscriber here. Good stuff. In answer to your question, a little of both make for a good video. Thanks
Thanks for the sub!
Nice mill 👍
Thanks! It still needs some improvement to help with flow. I would like to put a green chain in and a lumber stacker
I subscribed. Lived in NW Arkansas for about 12 years.
I’m from north central Arkansas around Mountain View!
Nice mill. Wondering if you should build a roof over the important bits and fit a rain deflector to the exhaust pipe?
Yes we should and we are slowly doing it. The exhaust has a flapper on it and we usually hang a bucket over it if it’s going to rain
Nice video. What is the capacity of the little loader and where did you get it and what did you pay for it? If you don't mind me asking. That sawmill looks very familiar, I believe I sawed several loads of ties on it, my favorite sawmill of all I have ever sawed on. Did you get it from Jeremy Callahan?
Hello Kelly! This is the mill we got from Jeremy that you have cut on before. Donald is my dad. The little loader will pick up 15 ties but not 20 and will pick up 20 cants and handles bundles of lumber. We bought it out of Clarksville Tennessee from a dealer and it’s been a great machine. I believe it’s the 35 size and if you got one size bigger it would be great. I’m not sure what we payed for it but it was pre Covid so I’m sure the price has gone up.
Good setup.. retired Ouachita Mts logger..
You probably cut some nice timber in those hills over the years!
Thanx, nice sawing and the edger is great , your off are needs to clean a path to his work be lots easier……but ya both are good
Yeah dad is always fussing at me to clean it up but I'm the only one on that end of the mill and he gets a little carried away sometimes and covers me up. About once a week I bring the loader over and clean it up
@@TheOutdoorRight Well I wasn’t Putin you down for sure, my Dad did that for me sometimes……..lol….you guys have a nice set there thanx for sharing your day
That’s a unique view ( from the carriage )
Sorry, just wondering. How do you keep rain off your mill, and the planks, when you’re not running?
It’s from the mast that carries the hydraulics to the carriage. We don’t keep the rain off the mill just the controls that are inside the saw cab under a roof. The lumber is stacked on 3/4 thick sticks between layers to help with air drying. Rain on the top of the stack doesn’t degrade the lumber because it evaporates pretty quick.
@@TheOutdoorRight thanks.
What trees do you cut for your ties? Heard that sweet gum gets used Thanks
@hitied1 oak, Hickory, ash, sycamore, gum. Sweet gum makes a good tie
thank good times
What size engine on headsaw, I have a mill just like yours, I run 60 hp electric on saw
I wish I could run an electric motor but unfortunately I don’t have access to three phase power. The power unit is a Detroit 8v92 it cranks a lot of horsepower
Oh is that a 6v71?
8v92
@@TheOutdoorRight wow, that mill has serious Woof ! Good job
Sawmilling for me
Really nice mill 2 be uncovered needs a roof
Both!
You got it!
Change the view of Your camera. I want to see the log.I'm coming into the blade from the front
Will do!
#999....c'mon 1 more!!!
We got it now!
very slow mill saw cutting rough teeth needs side dressing leaving big saw marks on timber we would never put up with that in australia people would not buy that stuf they talk about rough sawn timber that is taking rough to the extreme.
Well in America we have these cool things called planers, 😎
Side dressing? I've never heard of that. We used to sewage and stone the old tool steel teeth but I'm sure most use carbide teeth these days. Keyboard worrier no doubt.lol
@@TheOutdoorRight I don’t think that DA knows what a railroad tie is.😂😂😂
First time watching your video. Thank you from northwest Pa.
You’re up in the good timber country! I sure would like to have y’all’s veneer market!