How to change a clutch on a Triumph Tiger 800
Вставка
- Опубліковано 6 вер 2024
- I change the clutch on a 2011 mk1 Triumph Tiger to show you how to do your own.
If you like this and want to contribute to keeping my channel running, please consider buying me a coffee - www.buymeacoff...
Biker Stuff Merch - www.redbubble....
Twitter - / girlybikerstuff
Instagram - / girly.biker.stuff
you put that judde spring in the wrong way
Absolutely fantastic, I hate to criticize, I wish you could have went through the process of adjusting the clutch afterwards. Thank you very informative and well done.
FWIW, with a pair of channel lock pliers, I can grab the pressure release arm above the clutch and rotate it clockwise enough to remove the cable end (and reinstall it later). This eliminates the need to remove the clutch lever.
Thanks for the video. I am thinking about switching to a Rekluse clutch (same process as your just showed). I thought the job was maybe more involved. Love simple to the point videos!
Hey Gary, thanks for the instructions! Highly appreciated! Can I ask please, what kind of sealent you were using on the clutch cover? Is that really necessary?
I use a semi hardening sealant. Red Hylomar. It seals but will allow me to remove the cover without destroying the gasket later if I need to.
Hi ! Thank you so much for this video !
I have a 2014 Tiger 800 XC and it seems that the clutch is tired by earring these "clock-cloc-cloc"
Was it the case about this bike or not ?
Thank you for your answer
No, once this clutch was pulled out, I measured it and it turned out to still be within spec. I refitted it afterwards and the bike was sold with 90k miles on the original clutch.
However, the XC is an off road bike and much more likely to wear out a clutch.
@@bikerstuff2 Thank you for your answer. I think I have to change this part because it makes a lot of noise and uncomfortable vibrations... My Tiger have 58k km
Excellent video. Thank you kindly!
Hola buen día al parecer esto lo podría hacer uno mismo ek casa????
hi Gary i changed my clutch last year and no problems but my fuel gauge doesn't indicate fuel level anymore. i did change the lever a few years back but the level did come back on after a couple of miles out of the petrol station. any ideas
Hi Paddy. The fuel gauge on the Tiger seems to take a few miles to register. It's not something I've ever looked into. It can be a bit worrying the first time you notice. You've just filled up and it still says you're empty. Scary. I hope this helps.
@@bikerstuff2 hi Gary resolved it. It's nothing to do with the float switch in the tank. I changed my clutch lever to a after market one not realising that the clutch sensor has a push pin that hits the back of the clutch lever to indicate that you have fuel in the tank and shows it on the screen. Terrible design detail. I put a video up myself on the subject. It was a costly learning experience. Good one to pass on
Is this going to work for Tiger 800 XC ABS model ? Also what brand plates would you recommend? Could you possibly share a link?
Buying a genuine part is best. Any bike clutch is generally the same, although I've never worked on a ducati.
Super video.
Do you need to drain the oil before removing the clutch?
No, it sits above the oil level.
@@bikerstuff2 Thanks, I didn't know that!! I assume therefore that the same applies for the crankcase cover next to it? I am asking as I need to take it off for powdercoating and if I do not need to to the oil drain, I can do it this weekend
To be honest, an oil and filter change is always worth doing. Any excuse for fresh oil is a good excuse.