If you turn your tee with the side out towards the tank you'll have less stick out and you can plumb down from the through side of the tee. You could also put the filters lower so as to not have so much up in the air and have a shorter bracket.
Hi John. Sorry. Not following you. Been sleepy.😴😴😴😴 We had a " typical fall like rain 25th & 26th. We got " saved" from Hurricane Helene. Tennessee & Kentucky will be dumped w/ rain until 30th. Oddly. We were " dry" in Vermont. I believe. It's a " tug o' war" of rain & sun's evaporation process. Very strange & wet last summer here. 🤔🤔🤔😲😲😲😳😳😳😵💫😵💫😵💫 Back to hydraulic pump. I like the blue tube where it is. " Forgive me. If any thing happens to it. 🤐🤐🤐🙄🙄🙄😬😬😬😑😑😑 I'm a " huge fan" w/ lever shut off valves. I had the most difficult time w/ circular valves. Those valves & lime minerals is a disastrous results. NIGHTMARE! 🤬😡😠😤🥺🥺☹️☹️ My male best friend had those " same" valve nightmares. The lever valves are more expensive. I DON'T CARE! YEAH! 👏👏👏👏 I don't mind spending more. For something that works. 🥰🙂😉👍Your spare rusty parts is not important. The important thing you don't need to buy any. I'm ALWAYS glad to have rusty parts. Sometimes. You need to restock whatever your low in supplies. I like your hydraulic pump. 👏👏👏👏 Your not a old geezer! Your a talented, gifted, & experienced man. That why I follow you. Again. Thank you John. Have a good Saturday afternoon & evening. To John & Big Boss. 🥰🙂😉👍❤💜🙏🏻🙏🏻🙏🏻🙏🏻☀️🛠🔩
Looking good John 👍 Thanks for sharing
When you showed us the valves in the last video, they were both in the Kubota with all your fittings.
Bill
hi there i had found another set i liked better , i found them later , john
@fricknjeep that's always the way of it😂
Hey John,
Use the centre of the tee to go into the valve from the tank and then take off from the sides, then you don’t need to shit the tank
If you turn your tee with the side out towards the tank you'll have less stick out and you can plumb down from the through side of the tee. You could also put the filters lower so as to not have so much up in the air and have a shorter bracket.
Can hear the rain. Too bad you can't ship some of that to Phoenix. We're dry as a bone.
I plumb forgot what the second valve line is for. Bypass from the pump?
down the line i am planning on another pump on the back of the engine , off the cam shaft , john
Could use a street elbow into the filter unit. That would shorten up the length.
hi there didnt get any of them , but i think your right , thanks for stopping in john
I'm just trying to save you from having to move the whole tank over. Time is valuable.
@@jonrussell1122 hi there it would take longer to go to the store , 20 miles away , but have to got that way tomorrow thanks john
fix it like you like it now, you will always be happy with it. thanks, I need some of that rain.
hi there i would love ti send it your way , rain again today , thanks for stopping in john
yes I can hear the rain...
hi there thanks for dropping in john
It sounds like a lot of rain ☔️ 😮❤❤
hi there it was more than i wanted to work around , raining again today , thanks for dropping on john
As long as it works the way you need it to, then the cost really doesn't matter. Also, if it saves you time and aggravation, so be it.😊😊😊
hi there i think you are right , thanks for dropping in john
Hi John. Sorry. Not following you. Been sleepy.😴😴😴😴 We had a " typical fall like rain 25th & 26th. We got " saved" from Hurricane Helene. Tennessee & Kentucky will be dumped w/ rain until 30th. Oddly. We were " dry" in Vermont. I believe. It's a " tug o' war" of rain & sun's evaporation process. Very strange & wet last summer here. 🤔🤔🤔😲😲😲😳😳😳😵💫😵💫😵💫 Back to hydraulic pump. I like the blue tube where it is. " Forgive me. If any thing happens to it. 🤐🤐🤐🙄🙄🙄😬😬😬😑😑😑 I'm a " huge fan" w/ lever shut off valves. I had the most difficult time w/ circular valves. Those valves & lime minerals is a disastrous results. NIGHTMARE! 🤬😡😠😤🥺🥺☹️☹️ My male best friend had those " same" valve nightmares. The lever valves are more expensive. I DON'T CARE! YEAH! 👏👏👏👏 I don't mind spending more. For something that works. 🥰🙂😉👍Your spare rusty parts is not important. The important thing you don't need to buy any. I'm ALWAYS glad to have rusty parts. Sometimes. You need to restock whatever your low in supplies. I like your hydraulic pump. 👏👏👏👏 Your not a old geezer! Your a talented, gifted, & experienced man. That why I follow you. Again. Thank you John. Have a good Saturday afternoon & evening. To John & Big Boss. 🥰🙂😉👍❤💜🙏🏻🙏🏻🙏🏻🙏🏻☀️🛠🔩
The rain in Spain falls mainly on your place.
hi there and again today , to much rain , thanks for dropping in john
Have a good sinner
Do you mean dinner?